Jump to content
SAU Community

Recommended Posts

Hi all I have been looking at some R34 GTT and some people have been telling me that its hard to pull out power from this car, I was wondering for those who have R34 whether this is true. I would gather that the car is slightly heavier than a R33 GTST, but what do guyz reckon

Thanks in Advance

Link to comment
https://www.sau.com.au/forums/topic/141792-r34-gt-t/
Share on other sites

I dont see how it would be any different than extracting more power from a 33. The 34 gtt has a slightly bigger cooler and slightly less restrictive exhaust, hence doing a cooler and exhuast to it will reap slightly less results than in a 33 gtst. But then again you have more power and torque to begin with...

Link to comment
https://www.sau.com.au/forums/topic/141792-r34-gt-t/#findComment-2641798
Share on other sites

Hi all I have been looking at some R34 GTT and some people have been telling me that its hard to pull out power from this car, I was wondering for those who have R34 whether this is true. I would gather that the car is slightly heavier than a R33 GTST, but what do guyz reckon

Thanks in Advance

Those ppl that are telling u this...have any of the driven or owned a 34 gtt?

Link to comment
https://www.sau.com.au/forums/topic/141792-r34-gt-t/#findComment-2641805
Share on other sites

$4200 and you will have around 230-250rwkw

FMIC $400 (any cheapy copy)

Turbo Back Exhaust $1000

Slide Turbo $900

Power FC $1000

EBC $400

Fuel Pump $200

FPR $200

Pod Air Filter $100

* Above prices are rough estimates; obviously prices fluctuate and change depending on when you get it and what you get.

It's not hard to draw power from the R34GTT; most of the members here have done the pioneering "research" into what works and what doesn't so all you have to do is read and fork out the cash.

NOTE:

* Auto R34GTTs are a complete headache to modify; I've spent a tonne of hours and dollars going around in circles trying to make things work (yes, one of the pioneers here). So even though you might save a few thousand on the cost of the car; you definitely won't keep that in your wallet for long once you start modifying :happy:

* Manual R34GTT; just follow the conventional methods of modification to any turbocharged car (except for the Cam gears, they do nothing)

Link to comment
https://www.sau.com.au/forums/topic/141792-r34-gt-t/#findComment-2645109
Share on other sites

NOTE:

* Auto R34GTTs are a complete headache to modify; I've spent a tonne of hours and dollars going around in circles trying to make things work (yes, one of the pioneers here). So even though you might save a few thousand on the cost of the car; you definitely won't keep that in your wallet for long once you start modifying :happy:

Just wondering stan.. besides not being able to run a PowerFC on an auto GTT - why is it so difficult?

Link to comment
https://www.sau.com.au/forums/topic/141792-r34-gt-t/#findComment-2645118
Share on other sites

Hi all I have been looking at some R34 GTT and some people have been telling me that its hard to pull out power from this car, I was wondering for those who have R34 whether this is true. I would gather that the car is slightly heavier than a R33 GTST, but what do guyz reckon

Thanks in Advance

lol mate were they wogs driving VLs?

theres so many members on here who have turned their stock 34 into a monster with some simple mods....

34s aint JUST a bigger cooler and a less restrictive exhuast....the engine....compared to a r33 is also better. being a new NEO version of the RB25DET it has alot more advantages over the 33.

aside from all that im sure theres also alot more

i watched a import mag dvd where it showed a r34 gtt being dynoed and it gained an extra 10kws from a turbo back exhaust. increasing the boost to .85 bar gave the rear wheels 200kws

i dunno maybe dats jsut me but i think dats pretty easy.

Edited by anDru
Link to comment
https://www.sau.com.au/forums/topic/141792-r34-gt-t/#findComment-2645135
Share on other sites

Just wondering stan.. besides not being able to run a PowerFC on an auto GTT - why is it so difficult?

Well you answered your own question didn't you Howie :happy: 1) It's auto, weak gearbox that will blow up on you if you don't do something about it. 2) The auto zaps a fair amount of power from what you are making and 3) the auto ECU is both a masterpiece and a freak of programming nature.

Sure you can stick with your SAFCs etc but soon you'll realize it just isn't enough. 3 options: 1) HKS F-CON V Pro, 2) PowerPlay Rom Tune and 3) Greddy E-Manage Systems

theres so many members on here who have turned their stock 34 into a monster with some simple mods....

34s aint JUST a bigger cooler and a less restrictive exhuast....the engine....compared to a r33 is also better. being a new NEO version of the RB25DET it has alot more advantages over the 33.

aside from all that im sure theres also alot simple

R34GTT also has a bigger turbo - most of you have forgotten this one which is the main reason for the power difference.

Other things different; the brakes, the suspension, the HICAS system, electronics, NCVS etc etc.

Companies don't release a new variant of a car to make it take steps backwards; they release them to show what new and IMPROVED things they've done to it.

Link to comment
https://www.sau.com.au/forums/topic/141792-r34-gt-t/#findComment-2645161
Share on other sites

Companies don't release a new variant of a car to make it take steps backwards; they release them to show what new and IMPROVED things they've done to it.

i dunno man....ive been hearing alot about mitsubishi and their evos.......

Link to comment
https://www.sau.com.au/forums/topic/141792-r34-gt-t/#findComment-2645170
Share on other sites

Thanks stan that's what i pretty much though as well. So say i'm just chasing 200rwkw i'd be alright with the tiptronic? I just like the auto cuz i'm a lazy bugger these days :happy:

You'll be fine :happy:

i dunno man....ive been hearing alot about mitsubishi and their evos.......

Try telling that to the race team accross the road from us...

Link to comment
https://www.sau.com.au/forums/topic/141792-r34-gt-t/#findComment-2645211
Share on other sites

i was told by a 33 owner at dyno day my 34 was putting out the same power as his 33. we had the same mods ,the only difference was he had a power fc and i didn't. i was also hitting r & r. all depends on how much money you throw at it.

him having a powerfc and yours not having one (and hitting r&r) is a pretty big difference in my opinion.

If you put a powerfc on yours (assuming its manual) the gap would open up a fair bit I'd imagine.

Simple fact is, you can get power out of a 33 or 34. They're both very well built and can handle much more than they came out the factory with... :)

Link to comment
https://www.sau.com.au/forums/topic/141792-r34-gt-t/#findComment-2646072
Share on other sites

34s aint JUST a bigger cooler and a less restrictive exhuast....the engine....compared to a r33 is also better. being a new NEO version of the RB25DET it has alot more advantages over the 33.

I never said they were JUST a bigger cooler an exhaust, i was merely giving an example such as doing an exhaust mod on a 34 compared with a 33...

Any one who thinks it would be hard to extract power from a 34 would have to be nuts

Link to comment
https://www.sau.com.au/forums/topic/141792-r34-gt-t/#findComment-2647118
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Very nice - I also have a 92 GTST and hardly see any others around these days
    • When I need something else to edit, I use Movavi. A friend who does video editing on a daily basis recommended me) it's an easy video cutter to use for beginners
    • I need to edit some videos for work but I'm not good at all this. Which video editor can you recommend?
    • I think you're really missing the point. The spec is just the minimum spec that the fuel has to meet. The additive packages can, and do, go above that minimum if the fuel brand feels they need/want to. And so you get BP Ultimate or Shell Ultra (or whatever they call it) making promises to clean your engine better than the standard stuff....simply because they do actually put better additive packages in there. They do not waste special sauce on the plebian fuel if they can avoid it. I didn't say "energy density". I just said "density". That's right, the specific gravity (if you want to use a really shit old imperial description for mass per unit volume). The density being higher indicates a number of things, from reduces oxygen content, to increased numbers of double bonds or cyclic components. That then just happens to flow on to the calorific value on a volume basis being correspondingly higher. The calorific value on a mass basis barely changes, because almost all hydrocarbon materials have a very similar CV per kg. But whatever - the end result is that you do get a bit more energy per litre, which helps to offset some of the sting of the massive price bump over 91. I can go you one better than "I used to work at a fuel station". I had uni lecturers who worked at the Pt Stanvac refinery (at the time they were lecturing, as industry specialist lecturers) who were quite candid about the business. And granted, that was 30+ years ago, and you might note that I have stated above that I think the industry has since collected together near the bottom (quite like ISPs, when you think about it). Oh, did I mention that I am quite literally a combustion engineer? I'm designing (well, actually, trying to avoid designing and trying to make the junior engineer do it) a heavy fuel oil firing system for a cement plant in fricking Iraq, this week. Last week it was natural gas fired this-that. The week before it was LPG fired anode furnaces for a copper smelter (well, the burners for them, not the actual furnaces, which are just big dumb steel). I'm kinda all over fuels.
    • Well my freshly rebuilt RB25DET Neo went bang 1000kms in, completely fried big end bearing in cylinder 1 so bad my engine seized. No knocking or oil pressure issue prior to this happening, all happened within less than a second. Had Nitto oil pump, 8L baffled sump, head drain, oil restrictors, the lot put in to prevent me spinning a bearing like i did to need the rebuild. Mechanic that looked after the works has no idea what caused it. Reckoned it may have been bearing clearance wrong in cylinder 1 we have no idea. Machinist who did the work reckoned it was something on the mechanic. Anyway thats between them, i had no part in it, just paid the money Curiosity question, does the oil system on RB’s go sump > oil pump > filter > around engine? If so, if you had a leak on an oil filter relocation plate, say sump > oil pump > filter > LEAK > around engine would this cause a low oil pressure reading if the sensors was before the filter?   TIA
×
×
  • Create New...