96 R33 S2 Speedo Wire?

[Fenix]

Hi,

I had a GReddy Turbo timer installed earlier in the year, the TT came with a speedo in which at time of installation was not setup. I finally found the time to go through and check where the "Purple" wire for the TT actually went to and turns out it was taped in a loop to itself just near the hand break. I need to join this with the cars speedo, but unsure as to which wire that is... does anyone know which wire i would need to join this with in an 1996 R33 GTST Series 2?

Regards

Jamie

[steveo_r33]

i am also looking to do this.. I am pretty sure we need to do this by runing it off the speedo wire from the std ecu... The purple wire In mine is connected to the hand brake sensor though....for the safety shutoff...I guess it may work if you just bridge that wire from the hand brake to the ecu? as in the manual it says purple is the speedo wire... hmmm.. not to sure which one on the ecu is the speed sensor.

I have same greddy t timer... you can dowload the manual for it from greddy.com.... as mine came with japanese instructions.

[Fenix]

Yep. same Jap manual, i also got mine from GReddy.com.

Anyone have any idea which wire we need?

[rob82]

Think its a green with a yellow trace from memory. You might want to check the pinout tho.

[jasont82]

check paul r33s home page hes got the pin outs

[EvilINGT]

Turbosmart E-boost 2 manual has the pin-outs and diagrams for heaps of cars including almost all turbo nissan cars specifically for speedo wire. All turbo skylines are included 5meg d/l off turbosmart.com.au

http://www.turbosmart.com.au/index.php?s=f...load&id=108

cheers

Evil