Jump to content
SAU Community

Avcr Boost Issue

ICER33

By ICER33,
in Engines & Forced Induction

 Share

Recommended Posts

ICER33 Community Regular

ICER33

Posted
Posted

was driving on high boost the other day and decided to punch it a little bit. all of a sudden the car sort of jolted a little bit. now the car is stuck on high boost. i had a look at the settings on the avcr and it was registering low as high, so i changed it back down, however i didnt want to mess around with the duty cycle on it. but still its stuck on high boost.

anyone had similar issues or got any ideas, cause i am eating petrol!!!!

cheers

Link to comment
https://www.sau.com.au/forums/topic/142109-avcr-boost-issue/
Share on other sites
rory_kieran Contributor

rory_kieran

Posted
Posted

Yeah I have a AVCR on my 32. It has done that with me before. I recommend lowering the duty until say 3rd gear up as it does help. I got the same jolt feeling you described just yesterday. I would in your situation record your current boost duties, lower it to a minimum and then go back to what you want the boost to be.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • KKaplumbaa
      SR20 to cefiro

      By KKaplumbaa · Posted

      Yeah, you are right. It seems easier and more reasonable to boost the engine. And as you said the blocks are very similar but the cylinder bores are different.
    • sunsetR33
      Anyone know this frontpipe?

      By sunsetR33 · Posted

      Sound logic, but in actuality way more illegal than just having the wrong pipe. Normally, doing something like that would be forgery. Meaning you may have certain documentation for vehicle parts, but the actual parts are different ones and you just assign them the numbers and badging from the documents. But nevermind that. Nonetheless, I AM curious if this pipe was ever made by any official manufacturer this way, because I honestly am not familiar with this pipe layout and shape. As I will be putting on the HKS Silent Hi Power once my exhaust gaskets arrive, as long as it sounds right I will just roll with this front pipe. I can always order the actual Mines part if I run into legal issues. It would be an unnecessary expense as there is lots of other problems I have on this car as of now.
    • GTSBoy
      Anyone know this frontpipe?

      By GTSBoy · Posted

      So, weld a plate with the Mines logo laser cut into it, onto it. Instant Mines pipes, whether they were or weren't originally.
    • GTSBoy
      SR20 to cefiro

      By GTSBoy · Posted

      I don't know if the blocks are "the same". They will be very very similar. Obviously, either the bore or the stroke is going to be bigger on the 20. If the bore is bigger, then the 18 head is unlikely to fit properly. If the bore is the same, then you can almost certainly fit the CA18 head, but there migth be a few fun things you have to do to make water galleries (or other things) line up properly. Or... it could just be real easy. Is it worth the effort? Almost certainly not. You can make nearly as much power on a 2 valv ehead as you can on a 4 valve. There's not any "magic" in a 4 valve head.
    • DRoc81
      Shifting questions

      By DRoc81 · Posted

      Yes, me too!!!!  I need to find a something that has all the abbreviations for what these cars have LOL
×
×
  • Create New...