Jump to content
SAU Community

Recommended Posts

Hello,

Ive had my gtt for around three months now and most of the members of my household cannot drive turbo cars. So here i am sitting here thinking why the F*** did i buy a turbo!!

Without selling the entire car, is there any way the turbo can be blocked or taken off so that it runs as a six NA?

If i cannot do this than is anyone interested in trading a Gt-t R34 for the NA four door :)

Thanks guys

Link to comment
https://www.sau.com.au/forums/topic/142130-de-turboing-an-r34-gt-t/
Share on other sites

no it is still classified as a turbocharged car, even if you pull the turbocharger off. the compliance plate, rego and papers all will say gtt turbocharged so it wont matter. why cant they drive it? over power the weight rule for their age?

well did u buy the car for them or for you? why do u worry about everyone else in your house so much?

I worry, because there is four of them who cannot drive it...

The four of them are on their P's and in sydney cannot drive her

Im pretty deadset on doing it, but you've just answered my question in one.. thanks

Edited by omgitzandrew

Hey Mate,

Isn't it legal to drive a turbo if it's your "only" family car? Just sign off your other cars to trusted family members (even though they still yours, no one will know) and that way your kids can drive it.

I'm not 100% sure if the family car exemption is still available double check...

Edited by MR R34
dude its your car..... did u pay for it ?

I can totally understand what your saying, but the plus's far outway the minus's .

Yes i paid for it, all $28, 000

Im also not the father of the family, im only ninteen, im refering to my 3 brothers and 1 sister. Yes, its insured

Edited by omgitzandrew

de turboing a skyline is like puttin a gtr engine in a mustang, should never be done yet alone thought of. but i do however understand your predicament, i would do as nizmoid suggested and keep the skyline for yourself :)

Tell them to buy there own f*kkin cars lol. Asif make your car crapper (which you cant do anyways) for them to drive it! You must be a really nice guy to consider that... but no lol

just buy a shitbox for 2k

$500per person

problem solved

Very good idea!

i think i have the solution for you

ill trade u my 1996 hyundai lantra for it - its definately non-turbo - fun for your whole family! i know its not an equal trade so... throw in a few hundred for me too.

I can totally understand what your saying, but the plus's far outway the minus's .

Yes i paid for it, all $28, 000

Im also not the father of the family, im only ninteen, im refering to my 3 brothers and 1 sister. Yes, its insured

if you deturboed the car, would they neccesarily wish to drive it? Aside from diggin into your personal business like everyone else, to de-turbo the car, you would need to transplant in a non-turbo engine, or the essential non-turbo parts from a non-turbo r34 - these are very rare and therefore expensive. You'd probably be best off selling the car, even if you did 'modify' the engine, it may still be registered as turboed, and if not, the car will be 'modified' and possibly therefore illegal anyways.

Edited by SuAvE-1

ok, well the problem with de-turboing a turbo motor is that the internals aren't like a non-turbo motor. they are designed to have less compression (the boost makes up the difference). this means that if you de-turbo it it will have less power than a non-turbo motor.

it would be easier to sell the car and get a non turbo car. to remove the turbo you would have to get a new manifold, block all the turbo water and oil lines lines, get a new exhaust (if it has a 3", since a 3" on a n/a car would be extremely noisey, and actually reduce the power output), and probably retune the computer to alter the timing.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
    • I hope that is not something that bad. From what i remember he said that only first gear is "hard" to get in and that he has couple of ideas what to try next but idk 😕  hope it is not gearbox out. I will let you know.
    • If it's not the hydraulics, it is probably gearbox back out. Usually as per @Duncan's post, or otherwise associated with not getting the throwout fork positioned correctly. All the way up to catastrophically bolting shit back together without it being aligned properly and wrecking the clutch/input shaft/flywheel/something else.
×
×
  • Create New...