Jump to content
SAU Community

Recommended Posts

  • 2 years later...
  • Replies 71
  • Created
  • Last Reply

Top Posters In This Topic

Okay.

My Supra held dead level, with a R34 GTT (Auto in both)

Later on, I got my rear end handed to me by a V8 VN with an exhaust.

Basically, the R32 would most likley be beaten down like my Supra against a V8 in the VN.

Now against the V6, on the roll, I just start to loose out.

So I'd be hazarding a guess, that the R32 would loose out too (BTW, my Supra IS twin turbo)

Dude, a 2JZ-GTE being beaten by a 5ltr VN?

That doesn't sound right to me :s

An NA Skyline should beat your average AU falcon or commodore(note:SHOULD) as they aren't very quick. At the drags tonight a stock AU falcon was running consistent flat 17's, however a stock EL automatic was running mid 15's the whole night with absolutely no mods. A mates VR commodore with full exhuast, extractors, V8 throttle body, bellmouth removed and shift kit ran 15.7 on his best run. Its the VN/VP commo's and EF/EL falcons that will spank an NA liner quite easily.

An NA Skyline should beat your average AU falcon or commodore(note:SHOULD) as they aren't very quick. At the drags tonight a stock AU falcon was running consistent flat 17's, however a stock EL automatic was running mid 15's the whole night with absolutely no mods. A mates VR commodore with full exhuast, extractors, V8 throttle body, bellmouth removed and shift kit ran 15.7 on his best run. Its the VN/VP commo's and EF/EL falcons that will spank an NA liner quite easily.

i'm guessing that there was something wrong with the AU (like probably done 300,000kms and getting a bit tired). i've driven quite a few of the aussie tanks and i can tell you than an AU will beat a VN or an EF. it won't be by much, but they are faster, and they sure as hell aren't a second slower.

I dunno Marco, I've driven an AU aswell and they feel faster than the old dogs but I think it might be the extra torque that gives it that feel. They are pretty slow off the line cause they are heavy bastards. The VR and EL were much lighter and launched a bit quicker IMO.

was the au auto or manual? you can't compare manual to auto, but still, the stock times for the AU (non xr6) were low 16's for the autos. and the stock times for the EF/EL were pretty much the same. throw an exhaust on them and a set of tyres and you'll get well into the 15's. the xr6's are quicker. there are people with au xr6's into the 14's with CAI and exhaust.

hey, not so true i got a rb20de all stock besides spitfire coilpacks wouldnt do anything anyway but from a stop start i always get to 60 b4 most things besides a few time vs v8 ss xr6 turbo and a r33 gtst but most n/a's that try race me like all of them do i normally get a head then i stop cause dont wanna speed happy.gif then they over take me cause obviously im braking so i dont go over speed limit but yeh last night this dick in a 2007 xr6 n/a was revin shit at me for like 2 kms then at set of lights i gave it to it on lights and beat him to 60 not by much but still did .. i dont know why everyone says rb20de is so shit mine isnt bad at all more power then i thought it was going to have... not saying its reall powerful but not as bad as u would think ermm.gif

i could understand beating aussie 6's because of the fact that their diff ratios are so tall, but seriously, go up against other 4 cylinders (or people who can drive) and you'll find out just how slow it is.

and being able to go from 0-60 fast isn't a sign of power, just a sign of short diff ratios and decent traction (something an rb20 doesn't have to worry about since it has bugger all torque). try launching an aussie 6 or 8 by revving it up and side stepping the clutch like you can in a low torque, high revving car and you'll find that it is suddenly hard to see due to all the smoke.

LOL bozodos get fkd man no shit i kno my car has shit all power im not sayin my car is fast just sayin what has happened ..... all i read on n/a threads are r32 gts are shit and have nothing all im sayin is it does have a bit obviously its not alot since non turbo and rb20de .... what else im a p plate cant drive a turbo or else i would of got one and i love skylines why would i get rid of it ...if i liked say ford / holdens or something else i would of got one but no i dont like any of them at all .. insult to the rest of us hahaha gee dont even know you

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Depends how low and tyre size. Should fit with natural camber, skinny tyres and rolled guards.
    • Hi guys, planning to get 18x9 +25 in fronts and 18x10 +25 in rears been reading the whole thread and cant really find anything   Anyone know if these will fit a r34 gtt with no scrubbing or guard work needed?
    • They usually get made by hand as part of any such swap.
    • Was planning on getting an R35 MAF and the adapter, should this be okay? Also any idea where I could get my hands on an intake pipe?
    • I mean yes, if you're starting from scratch on an unknown engine yes you don't need to be doing all kinds of math in the background but if you're doing relatively minor changes like AFM + injectors + boost up with some aftermarket turbos it takes quite a bit of math if you want to do something like maintain OEM fuel + timing tables but compressed and then a bit more load scale up top. I think I've spent too much time working on big engineering nightmares though so I'm a big fan of trying to constrain the scope of whatever work I'm doing as much as possible and trying to get it right before moving on. For example, a local owner just did the usual E85 + single turbo conversion to his R32 GTR and nearly burned his car to the ground doing some spirited driving up the local mountains. Turbine is unshielded and too close to the hood insulation. It's tough to balance "just get the project done" and "seemingly small details can cause massive setbacks I'm not willing to deal with".
×
×
  • Create New...