Jump to content
SAU Community

Recommended Posts

wasnt that bad, was doing 71 in 60 zone, missed the sign chaning from 70 to 60, nice cop though, commented my car :kiss:

p.s. will hopefully run into some of you there

:) u have to be more observant :kiss: jk jk.. so its city west meeting at 7 depart at 8 hey? i'll see u guys there :)

haha yeh i do :), my own fault, shoulda payed more attention, was just buzzing cos i was driving for first time...legally :)

will cya there indeed, ill look out for ya plates

just washed ar for the cruise, hopefully it will stay clean between now and then

Is anyone keen on meeting as a SAUWA group elsewhere and heading down to City West together :)

Maybe meet at like Leach Highway Macca's?

id be up for that, is that location central enough for everyone ?

reading a few of the other forums looks like a lot of people will be rockin up a bit earlier than 7 to get decent parking, if we meet at Leach hwyt maccas at say 6 and then cruise from there we might be able to get some spots next to each other ? looks like its going to be a decent turnout

id be up for that, is that location central enough for everyone ?

reading a few of the other forums looks like a lot of people will be rockin up a bit earlier than 7 to get decent parking, if we meet at Leach hwyt maccas at say 6 and then cruise from there we might be able to get some spots next to each other ? looks like its going to be a decent turnout

yeh iv read up on that aswell, i know of people rocking up at bout 6.30, even earlier :huh:

I`m going to attempt to change my 3 belts sat morning/afternoon. If all goes well and i dont stuff it up then i will join you people at macca`s also.

Hope i dont have too many parts to pull out to do this job successfully. My first attempt in working on the skyline mechanically.

people better turn up at leach highway cos im going :rofl: i dont wanna get there and be the only one there!!!

ill definately be there, might have a few tag alongs in commys that i told about the cruise though :P

see you there at 6

i might even show

i might come in my excel and 'hang' with youse guys

or will come with my mate in a red 120y, depends if he wants to go or not

or a valiant wagon

just depends on what my mates are doin

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
×
×
  • Create New...