Sliding Performance Hiflow Picks And Installationon Rb20det

[CEF11E]

Daveo,

I am really happy with it. I have my tune perfect now and its making quite a lot of power at 14 psi it makes 204rwkw and I can't run anymore than that till I get new coilpacks. I have just ordered splitfires and will get them over the next few days. then 18psi will see 230rwkw. Last time it was on the dyno it made 220 on 17psi but was missfiring all over the place.

In short I have not had a single problem, drivability is great and the acceleration when it comes on boost is nothing short of JEEBUS!!!

[BAMR33]

how early is the rb20 spooling?

[CEF11E]

in my case goes into posative manifold pressure at 2400, 5psi by 3000, and 17psi at 4100

Edited December 24, 2006 by CEF11E

[CEF11E]

Had my final power figure confirmed about a week ago and have been a bit laxzy at posting the results. at 19psi the car is making 241rwkw boost comes on strong at 4100 and pulls like a train.

I have major traction issues so the car does not feel any faster than it did at 210rwkw. I have an open wheeling diff and fairly narrow tyres 215's once boost comes in hard it just spins all the way to third and 100kmph. with better traction via lsd and wider tyres it should be fairly fast in a strait line.

I am not really interested in 1/4 times but will take it to the track when I have the time. (no track in canberra) for daily driving there is a really nice fat power band and it pulls really hard. even better on the twisty stuff

It has taken quite a bit of effort to get the car to this stage and had been rewarding. the little R32 is a nice little package now

[WazR32GTSt]

congrats mate..

must be a good feeling to see the car paying off for the hard work

[dead32]

congrats mate, im glade to see im not the only one sticking with the rb20 for 230rwkw ++

[Roy]

Can you post a dyno? Or maybe jsut sound off on the rwkws at certain rpm/road speed?

[Cubes]

Thats damn good solid power and excellent spool.

4100rpm.. Impressive.

Excellent wheel selection Slide.

[CEF11E]

Thanks all I will have to get a printout from autotech. I will be in there next week and willl get one. was in a hurry to get afr's checked and left without the results

Hope you don't mind waiting a week for the dyno sheet.

[Cubes]

hope you don't mind waiting a week for the dyno sheet.

LOL... Yes we do.

[Slide]

Excellent results mate

241rwkw on a RB20 is outstanding.

The best all rounder is the turbocharger that you have and its the reason we are 3 weeks behind in orders

[Ghostrider]

Well guys, I picked up mine from Slide whilst on another quick visit to the Gold Coast last week.

I'm going to take some pics of both the high flow and stocky so that you can have exact comparisons to look at, but I'm looking forward to getting my L28 finished so I can put the turbo through it's paces.

Cheers, D

[Anquetil]

So looking forward to strapping one of slides puppies on when the tax man visits next!

Edited January 25, 2007 by Shane

[Simon-S14]

yeah i agree, 241 with the highflow is awesome on a rb20... even if you are using 100+ octane fuel

I got the RB25 Maximum overside highflow withstage 3 wheel for my rb20 and im sad to say its just too large for the RB20 Slide has come to the rescue tho and offered to make it a normal sized RB25 highflow so i can habve some hope of spooling it up , Big thanks to Slide!

so yeah i'll post results when i get it going again

[Haysey]

Mine is on order, along with the supporting mods sitting here, gtr injectors, Z32, big pump in the car and the other goodies...

cant wait to strap it all together YAY

[Cubes]

yeah i agree, 241 with the highflow is awesome on a rb20... even if you are using 100+ octane fuel

I got the RB25 Maximum overside highflow withstage 3 wheel for my rb20 and im sad to say its just too large for the RB20 Slide has come to the rescue tho and offered to make it a normal sized RB25 highflow so i can habve some hope of spooling it up , Big thanks to Slide!

so yeah i'll post results when i get it going again

When you say its too large where did you start seeing boost and where did it kick you in the back so to speak?

I'm trying to work out approx spool rates for the VG30 max oversize. Then I'll decide if its worth spending the extra 1k on a gt30 int gate. The time it takes to highflow the turbo will also determine if I go the slide or not.

If the cars going to be off the road for 3 weeks then I'll simply throw on a gt30 int gate. Unless Slide can sort out an exchange type setup, he sends I receive then I send my old one.

[CEF11E]

The 3lt will be able to spool anything slide can throw at it with a decent response time. I would ove to see one of these on an rb30.

What is your power goal cubes?

[Cubes]

Power goal... 270rwkw minimum. The motors built for it, it has head work etc so all the little bits help. I plan to push 20-24psi if I run the gt30 or just 18-19 if I run the slide. But realistically I may end up having to wind the boost down a little with the gt30 as it may be a little too much for rwd.

The gt30r .82 will be all in by the low 3000's with good boost made by 2600.

I'd hope the slide would be in earlier which is why I wanted to know what you meant by too big.

Weighing up the options.

If the slide turbo is all in sub 3000's then 270rwkw + the slide will be a really good street setup.

If not I'll put up with the slight extra lag from the gt30 and be happier with a bit more top end power.

Its all an unknown.. :S

[Slide]

When you say its too large where did you start seeing boost and where did it kick you in the back so to speak?

I'm trying to work out approx spool rates for the VG30 max oversize. Then I'll decide if its worth spending the extra 1k on a gt30 int gate. The time it takes to highflow the turbo will also determine if I go the slide or not.

If the cars going to be off the road for 3 weeks then I'll simply throw on a gt30 int gate. Unless Slide can sort out an exchange type setup, he sends I receive then I send my old one.

I just so happen to have a spare VG30 turbo

It is not for sale only exchange for cases just like this

I do mention to everyone that lets me know that the max oversize is going onto a RB20 that the turbo is not designed for the 2Ltr and is much better suited to the RB25.

This is why in the highflow thread under "Highflows for RB20" only the "Straight RB25 Turbo Highflow" is offered.

The Straight RB25 Turbo Highflow is the best option for both RB20 and RB25

For power and response it is unbeatable for a bolt on replacement.

yeah i agree, 241 with the highflow is awesome on a rb20... even if you are using 100+ octane fuel

I got the RB25 Maximum overside highflow withstage 3 wheel for my rb20 and im sad to say its just too large for the RB20 Slide has come to the rescue tho and offered to make it a normal sized RB25 highflow so i can habve some hope of spooling it up , Big thanks to Slide!

so yeah i'll post results when i get it going again

No problem at all mate

[Roy]

yeah i agree, 241 with the highflow is awesome on a rb20... even if you are using 100+ octane fuel

Is it using PULP or something a little better?