Jump to content
SAU Community

Recommended Posts

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

i got in trouble for having one mounted on my dash apparently u arent allowed stuff on your dash

there goes my soft toy collection :)

yeah because it blocks your view apparently

i would have just span some shit like "yeah but so is the rear view mirror...and the steering wheel...and the frame of the car... but people can move their heads you know to see around it."

on the other hand its probably best not to say that.

Edited by Bloodlust
yeah because it blocks your view apparently

i would have just span some shit like "yeah but so is the rear view mirror...and the steering wheel...and the frame of the car... but people can move their heads you know to see around it."

on the other hand its probably best not to say that.

It is apparently an obstruction or distraction for the driver, but you can have the unit mounted on the windscreen if you turn the display off. The current BEL range you can do this and still get the audible/voice alerts so the display really isn't needed anyway.

If the cop wants to say it's a visible obstruction then just move it to the drivers side corner of your dash and tell them that it isn't taking up anymore room there than their in-car K band radar antenna... if they are happy to remove theirs then you will do the same!

  • 4 weeks later...

i recently bought an el-cheapo whistler 1732 detector...my 2 cents

1. driving on highway...beeped twice (possibly from handheld) coz about 1km after..2 cars were pulled over by cops for speeding -dectector was on city mode with all bands turned on

2. detector was on quiet mode...beeped once passing a petrol station...no beeps after ...300yards on..there was a tripod mounted radar....made a u turn...and drove past the radar again ....detector did not give off a signal...u turn again...drove straight past the radar...no signal..but the guy was fiddling with the radar so it prolly wasnt turned on

2 hours later...drove past the radar again...still just the single beep from the petrol station...turned and drove past again...cop was dismantling the radar..so couldnt test further

anyone know what band the tripod mounted radar uses?

Multanova's are Ka band and are supposably the hardest to detect since there so low power. IIRC there on the higher limit or just out of Ka band because they drift so much (and hence aren't that accurate...), the wideband detectors do really well against them.

I bought a shit cobra detector off ebay and it doesn't go off until your right next to the thing... its probably just your detector being shit. The cheap ones are really a waste of money for use with multanova's.

Dan, lasers are only used as handhelds. The tripod thingo's (multanova's) are all radar still. I'm pretty sure those camera's they stick in wheely bins are radar aswell, lidar makes it harder to get all the lanes at once.

GODTHRILA, I need to come see you to do some testing :happy:

Do you have a lidar gun at your work? I have a 'concept' I'm keen to test :P

Dan, lasers are only used as handhelds. The tripod thingo's (multanova's) are all radar still. I'm pretty sure those camera's they stick in wheely bins are radar aswell, lidar makes it harder to get all the lanes at once.

GODTHRILA, I need to come see you to do some testing ;)

Do you have a lidar gun at your work? I have a 'concept' I'm keen to test ;)

The handheld lasers can be mounted to a tripod for further accuracy... they set these up a lot near Mandurah so I am told.

fr0st, just come and see me, we can test your "concept" with our laser

The multinovas are set up and operated by people who are outsourced. They are not official police officers ad have no standing to detain people. All they can do is call for the police.

I just thought they were trained/qualified cops... my bad ;)

The handheld lasers can be mounted to a tripod for further accuracy... they set these up a lot near Mandurah so I am told.

fr0st, just come and see me, we can test your "concept" with our laser

I've never seen a tripod being used before in Perth. As far as I'm aware the max distance they can use lasers at is 400m and still have it hold up in court. Probably wouldn't need a tripod for that, but I haven't used a laser gun before so I can't really comment.

Can you pm/post you business address? It only lists a PO box on your website

Cheers ;)

GODTHRILA, what would you recommend as a good value for money (cheaper ;)) radar detector?

sorry to jack the thread.... but keep an eye out in the for sale section... I might be sorting out something for the forums sooner than you can say "two all beef paties special sauce lettuce cheese pickles onions on a sesame seed bun"

I just thought they were trained/qualified cops... my bad ;)

I've never seen a tripod being used before in Perth. As far as I'm aware the max distance they can use lasers at is 400m and still have it hold up in court. Probably wouldn't need a tripod for that, but I haven't used a laser gun before so I can't really comment.

Can you pm/post you business address? It only lists a PO box on your website

Cheers ;)

I've never seen an eskimo before so they cant exist

or maybe I havent been around enough :)

ok my bad...it was an outsourced person (i.e: no copper uniform...and sitting in a white 4x4....think it is the multinova's ...laser/radar....damned if i knew...bloody thing looked like a friggin missile launcer waiting to blow up any hoon

so what do u guys recommend for detecting multinova's? ...or do they generally trigger off the detector only if its targeted at ya?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • it was good to see our presence at GTR festival..hope to see more SAU at these events 
    • This is awesome.     
    • Thanks for the quick replies guys its appreciated. A small extension was welded onto the standard 6boost external gate pipe which you can see where the pipe goes from black to stainless just below and to the right of the rear housing in the first picture. Overall I would say the flow is pretty good other than 6boosts choice to come straight off the collector at a decent angle.. Not sure why I went with two valves, I originally replaced the stock twin bovs with the GFB when I had the twins on. When I purchased the EFR it came with the Turbosmart Kompact BOV so I figured that would be a better option than the stock EFR Bov. I don't believe the Turbosmart BOV is adjustable? When I get the spike and then sudden dip in boost pressure, the turbo speed does drop as well. Stock head size wise however I believe it has Neo Turbo springs and a Neo Turbo intake camshaft and an aftermarket exhaust camshaft in the vicinity of 260 degrees. We didn't try a different MAC valve, we tried two different ways of plumbing it and we also tried removing the mac valve entirely and just having the boost source from the turbo directly connected to the wastegate and it still spiked / dropped and exhibited the same behaviour. Standard R33 GTR 5 speed tansmission. I'm running a Haltech Elite 2500 and can provide some logs if you. I understand what you're saying in that it looks like an auto plot however no, it's still a manual and it just has a lot of torque down low, for all intents and purposes it's a very impressive street car. I've attached a photo of the quickbitz dyno plot which was when the only difference is I was running -5 twin turbos with a mac valve. As you can see theres a decent dip in AFRs between 125kmh and 135kmh. Our problem now is not that the AFRs are dropping, just the boost pressure is dropping, however it is evident in the same RPM range of the map, coincidentally or not.
    • What transmission are you running?  It's a bit tricky with the scaling, but at face value the power "curve" looks more like a "line" which is a bit odd... basically a lot more like a dyno plot I'd expect with a highish (compared to a factory auto) stall torque converter type setup. If this is running an auto then this kind of boost control challenge is definitely a thing, the rpm scale on the dyno doesn't reflect what the engine is actually doing (unless the dyno has access to the engine's ACTUAL speed electronically) and what you'll get is a big rpm flare up as the engine torque launches past the converter pump's ability to resist torque at that rpm, then as the converter starts picking up rpm it will kinda even out again and the engine rpm will pick up more steadily. The trick with this "flare up" is if it's kinda near the boost threshold for the turbo then the engine's airflow requirements to maintain the previous boost level will outrun the turbo's ability to supply that boost - so you end up with a natural flattening off, if not dip when that happens.   If you are running closed loop, or even tune the "feed forward" wastegate duty cycle to deal with that rpm spike then when the engine starts settling to a more typical climb you'll actually have a situation where the gate is "too closed" and boost will run away for a bit, then have to pull down again.      It's not trivial to get this perfect as most boost control systems are generally expecting more predictable engine rpm rates of change, but if you *know* that's whats going on then you can at least "accept your fate" and realise getting that area perfect is kinda chasing your tail a bit, and assume that if the rest is working sensibly and the spike/dip isn't completely uncontrolled then you should be good. Sorry if I've gone off on a tangent, but the dyno plot and boost control behaviour look a LOT like what I've seen tuning autos in the past. What ECU are you running? Could possibly be convinced into looking at logs if I get too bored this weekend haha.
    • A few things that seem a bit off here. - why is there 2 BOV’s?  - the turbo smart BOV on the compressor housing, is it turned up ALL the way? I have seen this become an issue on old man Pete’s car. It would push open and recirc, turbo speed would rise and the boost pressure would do weird things. - stock head? Does that include springs? - tried a different MAC valve? Is it plumbed correctly?
×
×
  • Create New...