Jump to content
SAU Community

Rear View Mirror /steering Wheel Vibration

HolyEvil

By HolyEvil,
in General Maintenance

 Share

Recommended Posts

HolyEvil Community Regular

HolyEvil

Posted
Posted

hey there guys, another noob question by myself.. =)

the rear view mirror tends to vibrate once it reaches speed of 60-70 (i think about this speed) and above and it's pretty irritating, cuz..hehe at higher speeds, i can't check for cop cars behind me. and all the cars behind are at a blur..i have to hold the rear view mirror to make out the lights on the car..

anyway to eliminate this shake?

another problem (if it's called a problem) is that the steering wheel tends to vibrate/shake once it gets to speeds about 80-90, is there anyway to stop this? or is this a problem with my steering.. in my previous car a toyota echo, the steering wheel don't vibrate (silghtly) till i get to 130-140 (altho the whole car was kinda wobbly)... i don't understand why a skyline's steering wheel's feel isn't as good as a toyota echo.. anyway to fix this?

i don't mind paying a little money to get rid of these problem.

cheers

arep3 Experienced

arep3

Posted
Posted

the mirror, get a chunk of rubber and wedge it between the glass and the mirrors arm. worked for me and cost nothing. the steering wheel i also have the same issues. try a wheel alignment and balance. get the steerin system checked over. things like rubbers etc on the steering arms and that

HolyEvil Community Regular

HolyEvil

Posted
  • Author
Posted
Sounds like you need a wheel balance, if it still does it at higher speeds get an on car balance, fixed my problem, oh yeah your mirror will probably stop shaking too.

hi there the wheel balance is a wheel alignment? what is a car balance?

cheers

R33S2 Grand Master

R33S2

Posted
Posted

A wheel balance is where they take the wheel and spin it, a sensor on the machine that spins it detects any imbalance in the gyroscopic effect and recommends a weigth and a position for it.

A wheel alignment is done on a bed with 4 pads and the alignment of each wheel is checked in relation to each other, so that it drives straight and corners properly without undue tyre wear.

A vibration could be the result of an unbalanced wheel or 2 wheels fighting for direction.

HolyEvil Community Regular

HolyEvil

Posted
  • Author
Posted
A wheel balance is where they take the wheel and spin it, a sensor on the machine that spins it detects any imbalance in the gyroscopic effect and recommends a weigth and a position for it.

A wheel alignment is done on a bed with 4 pads and the alignment of each wheel is checked in relation to each other, so that it drives straight and corners properly without undue tyre wear.

A vibration could be the result of an unbalanced wheel or 2 wheels fighting for direction.

*nods* alrite thanks =)

i think i just had a wheel balance, I just got new rims/tyres put on my car about 5 days back.. so the balance of the car should be fine.. I think i'll take it for a wheel alignment tomorrow

thanks =)

R33S2 Grand Master

R33S2

Posted
Posted

I had much the same problem, I had 2 wheel alignments and numerous balances but it wasn't untill I had an on car balance that it went away.

Usually the weights used are in the 10-20 gramm range, I needed 58 on one and 62 an the other, whch is unusual so he said.

blind_elk Grand Master

blind_elk

Posted
Posted

A wheel alignment generally is not a cure for wheel vibration.

If you had new wheel / tyre combo fitted, are the wheels "hub-centric" (they need to be)? The other possibilities are things like worn steering bushes, worn steering rack, loose wheel bearings.

The mob that sold you the wheels should be able to diagnose and fix the vibration.

Godzilla32 Veteran

Godzilla32

Posted
Posted

Its funny how many people balance up wheels (especially aftermarket rims with stick on weights) and just get it close. In my experience with stick on weights it is quite time consuming to get it perfect. Like Blind Elk said go back to them for a fix..especially if it has only happened since getting the new wheels.

  • 2 weeks later...
HolyEvil Community Regular

HolyEvil

Posted
  • Author
Posted

Hi there, i tried wheel alignment/balance alreadey and the rearview mirror is still wobbly.. can you tell me where to get the rubber from? and wat type of rubber is it.. is it a small piece/ medium piece etc?

cheers

the mirror, get a chunk of rubber and wedge it between the glass and the mirrors arm. worked for me and cost nothing. the steering wheel i also have the same issues. try a wheel alignment and balance. get the steerin system checked over. things like rubbers etc on the steering arms and that
mad082 Grand Master

mad082

Posted
Posted

go to a bike shop and ask for an old tube. they should give it to you for free. if they don't call them scummy bastards and walk out and find another bike shop.

then just cut a bit of the tube off and wedge it in.

R33S2 Grand Master

R33S2

Posted
Posted

Dude I would be more concerned about why you have a vibration, if its not the tyres or alignment it could be your drivetrain, the tailshaft could be out of balance, vibrations are a sign of something wrong if you dont sort it, it could/will cause even more problems.

Godzilla32 Veteran

Godzilla32

Posted
Posted
Dude I would be more concerned about why you have a vibration, if its not the tyres or alignment it could be your drivetrain, the tailshaft could be out of balance, vibrations are a sign of something wrong if you dont sort it, it could/will cause even more problems.

LOL i aggree.

Still if its just a loose rearview mirror then it'll move with an kind of vibration..

HolyEvil Community Regular

HolyEvil

Posted
  • Author
Posted
hi there i got my wheels changed and noticed a vibration at high speed..... took it back to be balanced again...... they didnt balance it properly the first time..... get another balnce done!

I'll give this another shot.. i'll go back to another place to get my wheel balanced and see if they can find any fault..

thanks mate =)

HolyEvil Community Regular

HolyEvil

Posted
  • Author
Posted
go to a bike shop and ask for an old tube. they should give it to you for free. if they don't call them scummy bastards and walk out and find another bike shop.

then just cut a bit of the tube off and wedge it in.

sorry to keep repeating my question =)

just need to know where to wedge it in... at the clip thing which is at the center portion, bottom of the mirror?

thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Are you an oil nerd?

      By Kinkstaah · Posted

      I think the concept is highlighting the various scenarios where thicker oil helps, and thicker oil potentially doesn't help and only generates heat and costs power, in turn for safety which isn't actually any safer (unless you're going real hot). If anything this does highlight why throwing Castrol 10w-60 for your track days is always a solid, safe bet. 
    • GTSBoy
      Are you an oil nerd?

      By GTSBoy · Posted

      Jason should have shown a real viscosity vs temp chart. All the grades have very little viscosity difference at full operating temperature.
    • dbm7
      BCNR33 Blower Motor Resistor - Testing

      By dbm7 · Posted

      Oops... I meant to include the connector  view... BR/W - power from fuse L/W - motor negative to fan control amp (and off to HVAC pin19) OR/B - PWM signal (from HVAC pin20) B --  ground  
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Yep, if you are applying filler it sounds like there is something wrong with the body lol. Safe to assume there is going to be a lot of sanding going on if your still applying fillers.  Picture a perfect bare metal panel, smooth as glass. You lay down your primer, it's perfect. (why are you going to sand it?) You lay down the colour and clear, it's perfect. No sanding at all took place and you've got a perfectly finished panel.  You won't be chasing your tail, sounds like you were prepping to start laying filler. If your happy with the body after the sanding, there is some bare metal exposed and some areas with primer, no issues at all, start laying the filler. You are safe to lay filler on bare metal or primer (of course check your technical data sheet as usual for what your filler is happy to adhere to).  This isn't a 100% correct statement. There is primer that is happy to adhere to smooth bare metal. There are fillers that are happy to adhere to smooth bare metal. Just make sure you're using the right materials for the job.  Typically if you are using filler, you would go primer, colour and clear. I've never seen any instances before where someone has laid colour over body filler (maybe this happens, but I haven't seen it before). So your plan sounds pretty normal to me. 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I don't think there's any way someone is push starting this car.. I honestly can barely move it, and moving it and steering it is just flat out not possible. I'm sure it is, but needs a bigger man than me. I have a refurbished starter now. The starter man was quite clear and consise showing me how nothing inside a starter really should contribute to slow cranking, and turned out that for the most part... my starter was entirely fine. Still, some of the wear items were replaced and luckily it didn't show any signs of getting too hot, being unfit for use, etc. Which is 'good'. I also noticed the starter definitely sounded different, which is a bit odd considering nothing should have really changed there.... Removed and refit, and we'll pretend one of the manifold bolts didn't fully tighten up and is only "pretty" tight. GM only wants 18ft/lb anyway. I also found a way to properly get my analog wideband reading very slightly leaner than the serial wideband. There's Greg related reasons for this. The serial output is the absolute source of truth, but it is a total asshole to actually stay connected and needs a laptop. The analog input does not, and works with standalone datalogging. Previously the analog input read slightly richer, but if I am aiming at 12.7 I do not want one of the widebands to be saying 12.7 when the source of truth is 13.0. Now the source of truth will be 12.65 and the Analog Wideband will read 12.7. So when I tune to 12.7 it'll be ever so slightly safer. While messing with all of this and idling extensively I can confirm my car seems to restart better while hot now. I did add an old Skyline battery cable between the head and the body though, though now I really realise I should have chosen the frame. Maybe that's a future job. The internet would have you believe that this is caused by bad grounds. In finding out where my grounds actually were I found out the engine bay battery post actually goes to the engine, as well as a seperate one (from the post) to the body of the car. So now there's a third one making the Grounding Triangle which is now a thing. I also from extensive idling have this graph. Temperature (°C) Voltage (V) 85 1.59 80 1.74 75 1.94 70 2.1 65 2.33 60 2.56 55 2.78 50 2.98 45 3.23 40 3.51 35 3.75 30 4.00   Plotted it looks like this. Which is actually... pretty linear? I have not actually put the formula into HPTuners. I will have to re-engage brain and/or re-engage the people who wanted more data to magically do it for me. Tune should be good for the 30th!
×
×
  • Create New...