Jump to content
SAU Community

Recommended Posts

I am wondering if nismo brought out 555cc injectors in almost a burgundy red colour

from pictures ive googled they look identical to the 740cc

I also thought the part number may be listed on the actual injector instead. the only text i can see is 'made in japan'. Any ideas how i can tell if they are fake?

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/142876-red-555cc-nismo-injectors/
Share on other sites

pics?

who did you buy them off?

Do you want to see any particular angles?

I bought them from a registered business in perth. Workshops i have spoken to recommend them as being honest.

He got them from a guy who sells performance parts to a number of workshops in the area.

post-9455-1163244460.jpg

post-9455-1163244491.jpg

Nismo 555cc injectors for r33 are yellow, 740cc are red.

Thats what i thought but he swears black and blue they are 555cc

The only thing im really worried about is that if they are not genuine, they might be a lower quality and fail on me

Did you get them new?

Where they in a box and sealed in a plastic bag?

Do they have any markings or manufacturers details?

Do not put them on until you know what they are for sure...your tuner can do a flow test on them to see what

they are.

Hope I have been of some help.

Cheers :yes:

Did you get them new?

Where they in a box and sealed in a plastic bag?

Do they have any markings or manufacturers details?

Do not put them on until you know what they are for sure...your tuner can do a flow test on them to see what

they are.

Hope I have been of some help.

Cheers :yes:

good advice althou when i bought my nismo 740cc they didnt come sealed in plastics they where just in a nismo box.

You better get them flow tested because you need to know what they are rated or else your going to have a hard time putting in the injector duty cycle value in an aftermarket ecu

This is a comparison between nismo injectors and my injectors. they look quiet different to me. infact ive found some on ebay that look the same selling at about $330 US (set of 4)

http://cgi.ebay.com/ebaymotors/740cc-Deats...7QQcmdZViewItem

post-9455-1163323533.jpg

post-9455-1163323638.jpg

Where did you get the injectors from?

The deatschwerks ones are hiflow injectors. I just installed deatschwerks injectors into my R33. They are stamped with a number on the injector plug which corresponds to the flow report. IF they don't have the number stamped on them, then they are most like not Deatschwerks

you sure there not those venom injectors getting around.

does it say JECS anywhere?

It may be possible that there simpy an older model NISMO injector, I wouldnt get too worried if they dont look exactly like the latest edition. A few people have confirmed them as being 700's so they most likely are.

Edited by James_03
you sure there not those venom injectors getting around.

does it say JECS anywhere?

It may be possible that there simpy an older model NISMO injector, I wouldnt get too worried if they dont look exactly like the latest edition. A few people have confirmed them as being 700's so they most likely are.

yes it does say JECS, does that mean their venom?

there are actually numbers on the top

6E555707

A46-00

Are venom any good? (just out of interest)

yes it does say JECS, does that mean their venom?

there are actually numbers on the top

6E555707

A46-00

Are venom any good? (just out of interest)

Yep they are JECS 550cc I have exactly the same ones that got delivered yesterday :) They are not NISMO but they are good injectors.

What would be an average price for a set of 6? are they as expensive as the nismo ones?

I got them off another forum member still in their plastic for about $100 each. I was happy with that seeing as other ~550cc injectors are around $140+ each.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No......not yet Minister for War and Finances has stated that the Commodore has to go first Not that I am going to modify the NC any more than what it is already modified now.....
    • Thanks again, really helpful chap from alpha omega wanted to speak to me, little concerned if this is meant to he aero alloy/ airospace quality and car sitting on drive has caused this.  Airplane are subject to much more changing temp and conditions than road salts! My caliper, many other components much older have surface rust but never eating part of the metal   Had I not seen it , could have been a disaster! specifically on rear part of bracket coming off like biscuit will update on what they say, helpful people so far
    • January or Feb is it booked in for turbo fitment?
    • The MX5 has had some annoying rattles in both front doors over bumps So I installed fancy pants door bushings, which stopped all of the rattles with the windows up, but........with the windows down there was still rattles, so after some googling,  and a chat with MX5 Mania, I got some new door to glass weather seals, all the rattles, windows up, or down, are gone now Shout out to MX5 Mania, the weather seals were on sale, and when I head to Dural to pick the up they even fitted them for me for free I did see a "really" nice Blue NA sitting out front   and this Black NC PRHT that looked like it has sat in the sun for its whole life and never had a wash, the clear coat was non-existent, an it looked horrible, really horrible, but, it had a nice turbo kit with over 200kw, the thing went like a cut snake, bagging the rears through the gears and dosing like a champ 😍 But, as I've always stated, I am keeping my NC na, I'm happy with the current power the car makes In other news: MX5 Mania do a drive in drive out turbo kit, the only minor additional part recommended for boosting my car, as it sits now, is a oil cooler, and that bonnet vents are definitely required for track use Aftermarket version look a bit to "racecar" spec I wonder how Focus RS bonnet vents would look?????
    • Paint is only structural when applied to the outside of Chinese and Indian cars. Otherwise it should never be present between mechanical joints that were intended to be metal to metal. Pain slips, slides, cracks, compresses, and add thickness that wasn't intended to be there. It comes firmly under the category of "just no".
×
×
  • Create New...