Jump to content
SAU Community

Recommended Posts

60/40 more a track car

have a 4x4 for a daily

ive been told re55s are the go is anyoune running them and can you buy them in diffrent compounds as in harder/softer

Edited by spirosky33
Link to comment
https://www.sau.com.au/forums/topic/142897-semi-slicks/#findComment-2663194
Share on other sites

I personally think anything Dunlop are the best, but RE55s are cheaper and come up to temo quicker which is good for club sprints...bad if you want to do 10 more then 6 or so laps.

RE55s also dont seem to mind plenty of heat cycles. A friend that ran the Yokos on his GTR and another that runs them in the 944 Porsche series think that after a few heat cycles they are past their best, even though they may have plenty of trad left on them

Link to comment
https://www.sau.com.au/forums/topic/142897-semi-slicks/#findComment-2663467
Share on other sites

The Dunlop DZ02G are the best semis I have used, the bridgestone re55 are also excellent.

I've tried a bunch of other ones but have always been disappointed in comparison to those two - yoko A032R, yoko A048r, toyo 888, falken rs04v, falken rt215, kumho 712, dunlop d01j, dunlop d98j, bridgestone re540s.

But any of them will be chewed up in 5000klm especially if you are running a bit of camber.

Link to comment
https://www.sau.com.au/forums/topic/142897-semi-slicks/#findComment-2663874
Share on other sites

for 60/40 track/road use, you would probably be best off with a good road tyre designed to be used on the track sg:

Falken RT615 (treadware 200)

Federal 595RS (treadware 180)

These aren't as sticky as semi slicks but have stiffer sidewall construction than most normal road tyres.

These are the allround pick of semis. One of the cheapest, best and most common:

Bridgestone RE55S soft=WT, med=TT, hard=SR

Bridgestone RE540S soft=G, med=S, hard=R

others:

Dunlop DZ02G

Dunlop D01J

Yokohama A032R

Yokohama A048R

Kumho V70A

Toyo RA1

Toyo R888

Link to comment
https://www.sau.com.au/forums/topic/142897-semi-slicks/#findComment-2664474
Share on other sites

somthing sticky but not going to be chewed awy in 5000ks?

Most / All true Semi Slicks will be all but worn within 5000kms

My advice is go for the Federal 595-RS's

I had not driven on anything but street tyres until I bought these, at a recent track day I noticed the difference in grip levels and overall confidence they gave over the old Bridgestone road tyres was massive!

Infact I dropped almost 3 seconds in Lap times.

I imagine a true semi slick would be another level up again and would be good for another second off my lap time, but the tread life they offer is not enough for me as I do not want to run 2 sets of rims.

You should comfortably acheive 15'000kms from the Federals.

Link to comment
https://www.sau.com.au/forums/topic/142897-semi-slicks/#findComment-2671935
Share on other sites

RE55's are the best bang for buck I have used.

And I've tried DJO1, DZ02, RE540 and A048's as well.

Just have a set of R888's on my car now but I'm not expecting much from them to be honest (only have them because they were free).

The only tyres I'd buy however are RE55's (SR compound - which is all they'll have unless you specify otherwise)

Link to comment
https://www.sau.com.au/forums/topic/142897-semi-slicks/#findComment-2673540
Share on other sites

I have used RE55S, great grip, but only got a bit over 1500kms out of them

I have also used RE540, better wear, a little less grip

I am currently running Federal 595RS, cheapest of the bunch, grip is very good, they are on my daily which sees a track at least once a month and have lasted for nearly 6 months now, and still have more than 1/2 tread left

Best bang for buck, especially for street driven car IMO

Link to comment
https://www.sau.com.au/forums/topic/142897-semi-slicks/#findComment-2674472
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I agree on doing some better than factory pistons, rods, and oil pump. For anyone using the vehicle on the road, I don't get why everyone wants big cams. The stock cam profile, with some more lift would be mint for road usage. Everyone going big cams and then wondering why it isn't as responsive in traffic, when they've shifted the torque curve upwards an additional 1000RPM. Make torque, at lower RPM. Sure it's not as cool as claiming "500KW" and revving it to 8,0000RPM, but that same torque 2,000RPM earlier... Then you don't need the extremely high end pistons and rods, and blah blah blah.
    • Personal experience. Those f**kers burn. And are actually a PITA to put out. Next time I walk down the back, I'll snap a photo of what the inside of the bonnet looks like when that thing ignites. PS, powder fire extinguishers are useless on that stuff too as it's fibrous and when it ignites, it starts to pull apart. And you end up just blowing powder through a sieve effectively.   Like the big thing is, if it's fire resistant, it's job is to stop what burning? The METAL above it? It's just to try keep heat off the bonnet paint work.
    • Oh man, sorry, $60.00000000... 😛
    • That's more or less what he meant. What it really means is that you do not have to go full crazy on the build. Don't need the best oil pump, expensive rods & pistons, big cams, etc. You can upgrade whatever you want instead of using stock level items, but you don't have to. Having said that - any time an RB is opened up, if anything is getting replaced, I think the opportunity should be taken to do all the sensible upgrades. Pistons, rods, pump, etc.
    • February update 🙂 We managed to get the very last 1/18th "Extra Scale" cars stock available from bookstores in Kyoto. These are actually the last ones and will not be restocked again! Hachette Collections Japan have not decided on a release date for these or other models in the series, so for the time being these are all there are available new.  These are showing up on Yahoo auctions at inflated prices already (especially the Celica and NSX) so get yours now at a very reasonable price before they disappear! Stock quantities: NA1 Honda NSX - 1 left: https://www.oemsoko.co.jp/products/1-18-extra-scale-1990-na1-honda-nsx 1973 Toyota Celica LB 2000GT - 2 left: https://www.oemsoko.co.jp/products/1-18-extra-scale-1973-toyota-celica-lb-2000gt 1968 Mazda Cosmo Sport - 2 left: https://www.oemsoko.co.jp/products/1-18-extra-scale-1968-mazda-cosmo-sport 1970 KPGC10 Nissan Skyline 2000GT-R - 2 left: https://www.oemsoko.co.jp/products/1-18-extra-scale-1970-kpgc10-nissan-skyline-2000gt-r
×
×
  • Create New...