Jump to content
SAU Community

Recommended Posts

hi boys,

we just bought a car with this gear set in it.

it is in an r32 gtr.

we would just like to find out some answers on how the box?

1. is the box a really close ration

2. is the box hard to use and put into gear

and luck last 3. are there any common floors with this gears box or usual breakage pionts

thanks greg

Link to comment
https://www.sau.com.au/forums/topic/142928-og-giken-cross-mission-set/
Share on other sites

i hve one of these set in my silvia its a track only drifter so dont really drive it that much they r slightly louder and yeah of course stock synchros so u hve to be gentle i hve never had a prob with the actually gear set but everything else had to be replaced so they r pretty strong

i would like to know this as well. i am interested in the 3 gear set.

how much stronger are they??how much closer in the gear ratio??are they hard to drive? make any noises??

cheers

i did a fair bit of poking around about this set before i bought mine (i got the 5 gear set w/input shaft). I am yet to install it, but from what i know, it drives like a stock box, no clunking, grinding, noises, etc. First gear is a fair bit taller which ive been told makes a full out launch easier because you dont have to scramble to grab second. I think first does close to 100km/hr.

There was something in HPI magazine (GTR special) stating that the gears themselves will handle (and im not sure on this figure) 1000hp, but that the synchro nature limits you to 9grand rpm(?), and something about 800hp.. Note Im pulling those figures out of my head as i dont have the magazine here and i read it all a long time ago! Im sure someone has it on hand and can confirm. Whatever it was i remember being a bit concerned as i was going to run 800hp plus, but then after reading the article i thought it'd be ok. We will see!

Any of you looking to buy a set off the net from a private seller, it may be worth mentioning the infamous Harris OS gearset scam :P I wonder if it has yet caught up with the good old "Harris's", lol

I have the OS gearset, but had custom sync's made up in japan. i rev till 10k on 450 awkw, smash through gears, and it shows no signs of wear. last week i had suspicions tha the gearset was giving way so we pulled the box out and i had is x-rayd to check for micro cracking. but nothngs wrong with it. it holds up pretty well, good value for the money. and yes the first gear puts me at 94km/h @ 9500rpm. The box is quiet, like the stocker, it doesnt whine like a straightcut.

Edited by Faid
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...