Jump to content
SAU Community

If Any1 Wants Nissan Fast S/ware I'll Bring Them To Scs

Howie

By Howie,
in South Australia

 Share

Recommended Posts

Trav33 Mentor

Trav33

Posted
Posted

Can someone use the NissanFAST to determine what globes are used for :

R32 dashes (presume GTS,GTR,etc all the same?)

R33 dashes

R34 dashes.

They are either 'T5' or 'T10' globes... anyone got the answer?

Thanks muchly!

Iron Chef Grand Master

Iron Chef

Posted
Posted
My vin doesnt have R33 in it anywhere?

it's 6T91MPAAARYEYB004

Which bit do I use?

Your car must've been complied under the old system. You need the chassis number which will be on the build plate on the firewall. Will most likely start be ECR33XXXXXXX

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • WMDC35
      SR20 to cefiro

      By WMDC35 · Posted

      At a guess being carb all the dash loom will be different & will probably need more work there or replaced.  
    • robbo_rb180
      SR20 to cefiro

      By robbo_rb180 · Posted

      yes easily doable was very common conversion around 15+ years ago Require: Sr20 cross member and engine mounts sr20 gearbox or bell housing if manual CA already sr20 loom and ecu sr20 radiator (or make a cross over pipe to us CA style radiator) sr20 engine All parts can be sourced from an s13 Will require some mods to engine loom to body loom plugs but plenty of info out there on that.  
    • MBS206
      R33 GTS25 NA - Stalling when vehicle is at operating temp

      By MBS206 · Posted

      Also check the factory 2 wire coolant sensor is functioning properly and plugged in. Ignore the dash, the dash uses a different temp sensor.
    • MBS206
      NC MX5

      By MBS206 · Posted

      One hundred percent! Stock.... Take! It's your final parting gift from them! 😛 How warm can those ovens go? Can you get to 250c? If it can, please acquire two. I'll take one for powder coating... 😛
    • GTSBoy
      SR20 to cefiro

      By GTSBoy · Posted

      Yes, it will fit, with the right engine mounts, plus a complete wiring loom. The CA is carby fed, yes? Then you need to add a complete EFI pump system (probably a whole tank) to get that to go. I don't know the 4 cyl stuff that well, but I'd be reasonably sure you'd need an SR gearbox, which will definitely need a clutch, and probably lead to needing tailshaft mods (although maybe you'll get lucky there). There will be more. Not from me. Just on the list.
×
×
  • Create New...