Jump to content
SAU Community

Recommended Posts

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

guys i can confirm that the group buy is going ahead

i have sent the peolpe interested the bank details

if i have missed you let me know and i will send the details to you

any other questions let me know and i will try and answer them

As for the type of bulb thats in you car the best thing to do i take out a bulb and show a auto shop that sell lights to find out which bulb it is

hey mate, im wanting set in h3,how does the 8000k look on road compared to 6000k? and do these do the same start up colour change as the euro cars do(starts blue then goes white).

thanks

the 6000k is a pure white colour

the 8000k is more of a blue

the best to go for is the 6000k as you can see better on the road with the pure white rather than the blue

let me know if your interested

last day to put your order in

ive been told order will be in next week so hopefully end of next week or the start of the following week you should have your kits.

Thanks mate, sounds good. :P

hi guys

All the Kits have been sent out

you should recieve them b4 the end of the week

thanks

if i get more interest on these lights i will start another group buy

just depend on how many people interesed because i need 5ppl to get at this price

Edited by nismos15
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • There's nothing that some paddle pop sticks and extra cable ties can't fix.
    • Hey guys, so Golebys has good prices on Bosch injectors, and also sell an adaptor to go from 1/2 length injector to standard with the Nissan 10.5mm top seal.  Does anyone know if that adaptor is to suit the 14mm or 11mm injector tops?  And re. The bottom seal, to suit my standard RB20 intake, would I be right in saying I can just slip the 14mm square section O ring over the bottom of the new injector and done? Thanks in advance guy, Cheers, Rowdy
    • F my life. I was changing the oil on my R32 GTR today as usual and ran into a bit of a snag. I drained the oil out and was getting ready to finish the job by tightening the drain plug, however The stupid magnetic oil drain plug snapped in half, right at the magnet part. After about an hour of trying to remove it, I used a drill bit, which unfortunately pushed the magnet all the way into the pan, and just leaving the hollow threaded part of the bolt remaining. I was able to remove the hollow portion of the bolt from the oil pan with some pliers but the magnet is still in there.  So, the question is, should I drop the oil pan to get the magnet piece out, or is it okay to leave it in there? I really dont want to drop the pan, i'm about to go nuts.  PSA: Do NOT buy a BLOX magnetic drain plug. This is the one i had.    https://bloxracing.com/products/magnetic-oil-drain-plug-m12x1-25mm?variant=37131252859052&country=US&currency=USD&utm_medium=product_sync&utm_source=google&utm_content=sag_organic&utm_campaign=sag_organic&gad_source=1&gclid=CjwKCAjw47i_BhBTEiwAaJfPpgti1D2JwO7TDuMpXuqeQPCuIQSAfwxpWQH5rF9MD7sm5SCZDWLR_RoC_YoQAvD_BwE    
    • I actually have an aftermarket hanger, the detschwerks x1 hanger, but my dw420 has never really sat in it correctly, good to know I can just modify it a bit to suit. Yeah cheers man will definitely have a play with it and hope it solves my dramas.
    • Seriously though, it's the Shaft Autoservice high mount rear spoiler: https://az-style.shop/items/5ffaad5a72eb464137a6edb1
×
×
  • Create New...