Jump to content
SAU Community

Removing Back Seat In R32 Gtst

lwboosted

By lwboosted,
in General Maintenance

 Share

Recommended Posts

lwboosted Rising Star

lwboosted

Posted
  • Author
Posted

well i just figured it out... lol, all u need is a little persuation from a big flat screwdriver... there are 2 clips on each side on the very bottom. u need to put the screw driver in there and wedge it up. then it popes out.. need to give it a fair bit.. i thought i was going to break it...

then to get the back rest out just undo the 2 bolts holding it down and then lift up...

D_I_F Grand Master

D_I_F

Posted
Posted

NO no no.. no screw drivers needed.. you just need to pull the bottem part up then out.. its just clipped in..

And for the back part.. there are two screws that you have to undo then you push the back part up towards the back windscreen with the bottem of it towards you and it would unhook off..

RB20JT Rising Star

RB20JT

Posted
Posted

mine were very stifff...just make sure u pull the front straight up...doesnt matter if u apply force

because they r designed to be pulled straight up and out. but pull one side out at a time....the clip that is...

cheers boys

RB20JT Rising Star

RB20JT

Posted
Posted

bottom bolts? the seats arent bolted in....you just have to yank the shit out of the seat...and the pin things will come out...provided you pull directly up!!!

How do you get to the bottom bolts guys? ive been trying to get different kinds of tools in there all day and ima snap the bolt off soon
  • 2 years later...
Ultimategtr Proficient

Ultimategtr

Posted
Posted

Yep, i just did mine today. Taking it out was a piece of piss.

Youd be amazed how dirty it is under the seats and under the speaker tray.

I had a day off so cleaned out the boot and wired up the speakers and other loose bits up, so no more rattling from my boot :rolleyes:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Hexi
      Dumb rich kid tries modding for the first time

      By Hexi · Posted

      Haha thanks everyone, I'll take everyone's suggestions into consideration. If I do eventually choose a car ill post it here update on the mods I do.
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      I found the ingredients at larger amounts from a Coffee Shop. 1kg Citric Acid for €8.50 500g Baking Soda for €2.50 I tried it out tonight distilled water (I got from my ACs) and dish soap. It does get bubbly with dish soap. In just two hours the hanger has improved significantly and rubbing against any remaining rust seems to flake it off. I'm going to leave it a little bit longer and see how it goes. I have read that someone even used this solution in an ultrasonic cleaner to clean a seized water pump which brought it back to life.
    • Duncan
      Dumb rich kid tries modding for the first time

      By Duncan · Posted

      If you like more modern stuff than the R series, you should check out a V37 400R, they are pretty mod friendly
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Haha luckily we don't have emissions, inspections, or any laws against power adders here. They only thing they somewhat keep an eye out for are ridiculously loud exhausts. 
    • tidi0x
      CD009 RB Conversion

      By tidi0x · Posted

      Just wanted to pop in an update on my setup. The CD swap has been great, I love the mazworks housing for the overall simplicity. I ended up sealing my trans tunnel with a thin sheet of aluminum reused some of the holes on the trans tunnel, and laid some window sealing EPS foam around the edges. Works great, really quieted things down and sealed up the car.  As for the power comment. Right now I am also running about 650whp. with the way the bell housing is attached to the face of the transmission I have zero doubts it would be fine, mainly because the input shaft and main shaft bearings are seated into the bell housing adapter. This means the load is NOT on the bolts to maintain the power, rather into he casing of the bell housing; Yes the bolts are doing some work there, but with both shafts locked in zero worries.  End of the day, the Mazworks solution is the easiest and safest. no need to take your trans to a shop to get milled perfectly, it fits with minimal clearancing, and you can use all your existing clutch and flywheel.  Driving wise the CD has been great compared to the big box, I'll probably swap my final drive at some point. The serial 9 shifter is gooooood, my only qualm is how tight it is, it takes a fair bit to get use to, 5th and 6th are a bit eh/hard to find at times, but maybe I need re-adjusting, and I think my clutch master is very tired and needs a rebuild. 
×
×
  • Create New...