Jump to content
SAU Community

Recommended Posts

As the topic suggest, I'm pondering on using something else to gauge how long should the car be appropriately cooled down.

No offense to those who pre-program their TTs to 3 mins regardless of how short their trips may be(hey I know of some people) :D

But I think there's got to be a better way than to 'go by feel' or using your gut instincts to estimate. :uh-huh:

I've read that it's much more accurate to monitor(this is the part i'm confused) either the oil temperature(?) or the exhaust gas temperature(?) to accurately know when your turbo/engine is sufficiently cooled down before a shut-off. :burnout:

I'm thinking of getting one of these gauges(or maybe both), has anybody got any past experiences on this?

cheers y'all

I have a HKS type 1 that that. You can either set a time (up to 10 mins) or you can put it on auto and it works it out for you based on revs, speed and time of journey. It also has a shift light and a few g-tech type functions and a handy low battery warning. Good value for about $300 as a shift light costs around that anyway!

Originally posted by skyline33

it calculates how long it will take to cool down depending on how hard you drove. so you dont need to preset anything

so how does it really calculate how hard the car has be driven?

Do those timers come with some sort of temperature probe? (what would they probe, that's what I want to know)

Originally posted by CanberraR33

I have a HKS type 1 that that. You can either set a time (up to 10 mins) or you can put it on auto and it works it out for you based on revs, speed and time of journey.

I've read some people having issues with how 'smart' the TT is in calculating that, not sure if it's the HKS one.

Originally posted by CanberraR33

It also has a shift light and a few g-tech type functions and a handy low battery warning. Good value for about $300 as a shift light costs around that anyway!

I've been interested in that timer ever since I've gotten into turbo cars(since then many more other brands have incorporated that into their timers).

But just how accurate are those 0-400m timings? I'm tempted to get the G-Tech PRO II(maybe splitting the cost with a friend):)

Davis Craig have an electric water pump that can be set to continue pumping coolant thru the engine after the igntition has been turned of. Im looking to get one, as from what ive read they are a good thing.

Also there are oil pumps, cant recall the correct name, that start pumping oil before the engine starts, and i imagine can do the same once the engine is turned off. Many old school drag cars in the states use them, and i think they are pretty economical.

There was a design from a bloke that owned a CA-18DET S13 who designed and built his own TT, which used inputs from oil and water temp to shut down engine. If you want i can try and dig out the website.

Hi guys, we use the exhaust gas temperature, oil temperature and water temperature gauges and drive the car gently until they stay below 500, 85 and 80 degrees respectively. That way we cool down everything (gearbox, brakes, diff etc) not just the engine. Letting a car sit and idle does nothing for the other items.

Hope that helps.

Originally posted by AeroGrace

so how does it really calculate how hard the car has be driven?  

Do those timers come with some sort of temperature probe? (what would they probe, that's what I want to know)

I'm not to sure of the technecality, but i think it mointors the revs and engine, exhaust temperature plus how long the car was driven and it calculates it

I have worked on heavy diesel engines and turbo timers are used in these engines...they are ...IMHO...a bit useless in normal roadgoing cars...you never drive hard enough to wartrant a turbo timer... obviously you do not drive nonstop up a huge hill flat out then switch your engine off immediatly...if you do you do not deserve to own a sky;ine....

Turbo timers were designed for use in Heavy diesel machinery where the turbos are huge, take ages to spool down and are operated pretty much flat out when they are working, then often switched off after a hard work period leavoing the turbo and associated metal work at a much higher temp than some of the surrounding material, the only coolant it has is oil, usually a bush typebearing and not coolant cooled as in many road cars and also amuch less kind operator.

Unless you are quite unkind to your engine you are not in any danger of hurting it without a turbo timer.

Russ

so you're saying is most of us don't really boost often enuff to warrant the use of a TT to cool down unless for those who do much track/circuit work?

I've often heard it's better to ease off the boosting for the last portion of your journey as to let the air cool down the car, rather than let it idle for 5 mins under the sun(heatsoak)

I'm just paranoid i guess, better to be safe than sorry. Just hoping to get some sorta mental visual picture of the engine's/turbo temperature rather than a beeping countdown.

Might get some temp gauges in the future.

Thanks for that.

A turbo on a road car just doesn't operate for very long, whats the longest you accelerate flat out for...certainly never more than ten secs or so....and when you do this you certainly never are in a position to turn the car off straight after you have done this. The turbo just doesn't have an opportunity to get that hot in that short space of time.....track is different, but then as a previous post said....you should be cooling the entire car down not just the turbo etc....

Most turbos on road cars are also cooled with coolant too not just oil.

Anyway, I think they are largely a gimmick, they wont hurt your engine but you can spend the money elsewhere, just drive within the law for the last 2 km or so before you get home and youll be more than fine.

Russ

I have the HKS type 0 (read: cheaper, non-gtech functions).

In automatic mode, it uses the engine revs to determine cool down time. Boost has nothing to do with the equation. So saying that, "if you stay off boost for a while" is an incorrect and pointless statement. The TT ticks up quite rapidly from 0 for about the first minute. It gradually slows the time increase (unless you are still caning it), and at highway speeds (100-110) usually hovers around the 2.5-3 min mark.

If you slow down and you revs drop, the timer slowly counts down. Like wise if you're stopped at lights. Very effective for prolonging engine life IMHO as long as you don't use it as the be all and end all of when to shut off your engine.

As Sydneykid said, there are other things that should be adequately cooled besides your engine oil.

Adrian

I belive that jaycar make a kit that work's using a exhaust temp probe when the exhaust / turbo temp drops to a preset temp it will then power off the engine.

This I belive would be the best type of setup as it will only keep the engine running on if nessary, (the turbo is above a set temp)

A drive to the local shop and back would not get the turbo hot enough to keep the motor running when the key is turned off.

I have a number of temp gauges and more often than not if you have just been driving averagly and you pull up and idle, the temp gauges go up...not down, idling (unless you have a couple of efficient thermo fans) is not an effective cooling strategy.

The reason turbo timers were invented is to give engines which have high temperature diferentials in their parts a chance to minimize this differential not to cool them down....

The bottom line is....they are not designed to cool the engine down, idling does not do this, if you dont believe me...half empty your radiator, when you idle the temp goes sky high...when you drive it comes down again.

Cheers

Russ

russcb007 i think you missed the point,

This is allways the case, that's why you dont just shut the motor off the temp will rise before dropping this is because the air/water flow around the motor has stopped.

Shut off water temps should be about 80 deg.

Turbo timers were invented to keep oil/water flowing through the turbo whilst it is red hot, it prevents the oil cooking inside and sizesing the turbo bearings by keeping the oil/water flowing.

Have you ever seen a red hot turbo?

the oil & in some cases water flowing through DOSE cool the turbo down to a point that it wont cook. (this is has little to do with engine temps)

Turbo timers arnt designed to cool to the motor down but to bring turbo temps down to a safe level. Hence the name TURBO TIMER!

i think after a hard rive you'll have to drive for more than 2km's to get it all cool.

I've driven mine hard and after 5 mins (more than 2 km's) of just crusing i've popped the bonnet that there is that lovely red glow still coming from the turbo so it does take a bit to get it cooled sufficiently IMO.

I've got a factory TT in mine and they only have 1/3 mins settings so i cruise for about 10 mins after hard driving to be safe... considering my tubo isn't cheap to replace.

Well if you can get your turbo red hot and keep it that way all the way to your house where you mostly shut it off then yes a turbo timer would suit you....I haven't had that problem.

If this was the case as it appears to be is 1-3 extra minutes idling going to make enough difference?

Cheers,

Russ

I think it all comes back to how lazy you are! If you can you should always go easy on the car for the last 10 mins or so to let everything cool down. However, if you're like me and do a lot of stop/start driving a TT is good.

After a track session I do a couple of cool down laps and then let the car idle for 10 to 15 mins with the bonnet open.

Just my 2cents!

Cheers,

James.

When in your stop start driving might your turbo be red hot? Or hot enough to seize the turbo, all at the point where you switch off the engine?

I understand why turbo timers are made and what they are supposed to do...what I dont agree with is that under normal or even spirited driving in a road car in suburban melbourne you can work the turbo hard enough to get it to a stage where a TT would be Neccesary, and tyhen switch off your engine at this point....

Anyway, I am not advocating you dont get one....I just think on the whole for a road car driven on a daily basis they are not neccesary or helpful...just be kind to your engine.

Russ

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Jdm DC2R is also nice for a FF car compared to the regular hatches of the time.
    • Now that the break-in period for both clutch and transmission is nearly over I'd like to give some tips before I forget about everything that happened, also for anyone searching up how to do this job in the future: You will need at least 6 ton jack stands at full extension. I would go as far as to say maybe consider 12 ton jack stands because the height of the transmission + the Harbor Freight hydraulic platform-style transmission jack was enough that it was an absolute PITA getting the transmission out from under the car and back in. The top edge of the bellhousing wants to contact the subframe and oil pan and if you're doing this on the floor forget about trying to lift this transmission off the ground and onto a transmission jack from under the car. Also do not try to use a scissor jack transmission lift. You have to rotate the damn thing in-place on the transmission jack which is hard enough with an adjustable platform and a transmission cradle that will mostly keep the transmission from rolling off the jack but on a scissor lift with a tiny non-adjustable platform? Forget it. Use penetrating oil on the driveshaft bolts. I highly recommend getting a thin 6 point combination (box end + open end) wrench for both the rear driveshaft and front driveshaft and a wrench extension. These bolts are on tight with very little space to work with and those two things together made a massive difference. Even a high torque impact wrench is just the wrong tool for the job here and didn't do what I needed it to do. If your starter bolts aren't seized in place for whatever reason you can in fact snake in a 3/8 inch ratchet + 6 point standard chrome socket up in there and "just" remove the bolts for the starter. Or at least I could. It is entirely by feel, you can barely fit it in, you can barely turn the stupid ratchet, but it is possible. Pull the front pipe/downpipe before you attempt to remove the transmission. In theory you don't have to, in practice just do it.  When pulling the transmission on the way out you don't have to undo all the bolts holding the rear driveshaft to the chassis like the center support bearing and the rear tunnel reinforcement bar but putting the transmission back in I highly recommend doing this because it will let you raise the transmission without constantly dealing with the driveshaft interfering in one way or another. I undid the bottom of the engine mount but I honestly don't know that it helped anything. If you do this make sure you put a towel on the back of the valve cover to keep the engine from smashing all the pipes on the firewall. Once the transmission has been pulled back far enough to clear the dowels you need to twist it in place clockwise if you're sitting behind the transmission. This will rotate the starter down towards the ground. The starter bump seems like it might clear if you twist the transmission the other way but it definitely won't. I have scraped the shit out of my transmission tunnel trying so learn from my mistake. You will need a center punch and an appropriate size drill bit and screw to pull the rear main seal. Then use vice grips and preferably a slide hammer attachment for those vice grips to yank the seal out. Do not let the drill or screw contact any part of the crank and clean the engine carefully after removing the seal to avoid getting metal fragments into the engine. I used a Slide Hammer and Bearing Puller Set, 5 Piece from Harbor Freight to pull the old pilot bearing. The "wet paper towel" trick sucked and just got dirty clutch water everywhere. Buy the tool or borrow it from a friend and save yourself the pain. It comes right out. Mine was very worn compared to the new one and it was starting to show cracks. Soak it in engine oil for a day in case yours has lost all of the oil to the plastic bag it comes in. You may be tempted to get the Nismo aftermarket pilot bearing but local mechanics have told me that they fail prematurely and if they do fail they do far more damage than a failed OEM pilot bushing. I mentioned this before but the Super Coppermix Twin clutch friction disks are in fact directional. The subtle coning of the fingers in both cases should be facing towards the center of the hub. So the coning on the rearmost disk closest to the pressure plate should go towards the engine, and the one closest to the flywheel should be flipped the other way. Otherwise when you torque down the pressure plate it will be warped and if you attempt to drive it like this it will make a very nasty grinding noise. Also, there is in fact an orientation to the washers for the pressure plate if you don't want to damage the anodizing. Rounded side of the washer faces the pressure plate. The flat side faces the bolt head. Pulling the transmission from the transfer case you need to be extremely careful with the shift cover plate. This part is discontinued. Try your best to avoid damaging the mating surfaces or breaking the pry points. I used a dead blow rubber hammer after removing the bolts to smack it sideways to slide it off the RTV the previous mechanic applied. I recommend using gasket dressing on the OEM paper gasket to try and keep the ATF from leaking out of that surface which seems to be a perpetual problem. Undoing the shifter rod end is an absolute PITA. Get a set of roll pin punches. Those are mandatory for this. Also I strongly, strongly recommend getting a palm nailer that will fit your roll pin punch. Also, put a clean (emphasis on clean) towel wrapped around the back end of the roll pin to keep it from shooting into the transfer case so you can spend a good hour or two with a magnet on a stick getting it out. Do not damage the shifter rod end either because those are discontinued as well. Do not use aftermarket flywheel bolts. Or if you do, make sure they are exactly the same dimensions as OEM before you go to install them. I have seen people mention that they got the wrong bolts and it meant having to do the job again. High torque impact wrench makes removal easy. I used some combination of a pry bar and flathead screwdriver to keep the flywheel from turning but consider just buying a proper flywheel lock instead. Just buy the OS Giken clutch alignment tool from RHDJapan. I hated the plastic alignment tool and you will never be confident this thing will work as intended. Don't forget to install the Nismo provided clutch fork boot. Otherwise it will make unearthly noises when you press the clutch pedal as it says on the little installation sheet in Japanese. Also, on both initial disassembly and assembly you must follow torque sequence for the pressure plate bolts. For some reason the Nismo directions tell you to put in the smaller 3 bolts last. I would not do this. Fully insert and thread those bolts to the end first, then tighten the other larger pressure plate bolts according to torque sequence. Then at the end you can also torque these 3 smaller bolts. Doing it the other way can cause these bolts to bind and the whole thing won't fit as it should. Hope this helps someone out there.
    • Every one has seemed to of have missed . . . . . . . The Mazda Cosmo . . . . . . what a MACHINE ! !
×
×
  • Create New...