Jump to content
SAU Community

Time for a new clutch!

CanberraR33
 Share

Recommended Posts

CanberraR33 Community Regular

CanberraR33

Posted
Posted

I know it's been asked before, I did a search. But I couldn't find the answer I was looking for.

My clutch is now slipping, and every time I go for a drive all I can smell is burning clutch!

I have a stock R33. I want to get more power out of it over time, but for now it's stock. I want a clutch that allows me to drive normaly (not the whole "on/off" thing) but withstand a few more burnouts and draging then the standard clutch. Mine got stuffed the other night when a line lock went wrong and the clutch smoked instead of the tyres! :P

Justjap are advertising a "performance clutch" for around $500. Does anyone know much about that?

Link to comment
https://www.sau.com.au/forums/topic/14318-time-for-a-new-clutch/
Share on other sites
Jay95R33 Grand Master

Jay95R33

Posted
Posted

Do'h... :P

Not good..

I think there are two basic ways you can go for the power upto 200rwkw - 240ish.....

First is to go a full faced organic or ceramic clutch with a heavy presure plate, and second would be a 5 or 6 puck brass button clutch.

The full faced heavy presure plate will bite a little quicker that a factory one, hold more power, and give your left leg the Arnie look :)

The 5 or 6 puck clutch is very light (same as factory) and bites very quick and will hold more power.

Me and James (you know the other James) ahve put two 6 puck clutches in his and a mates car and both are holding great. While mine has a heavy presure plate type (car came with it).

If you don't mind a heavy peddal I'd go with the one I have, but it it would really pi$$ you off, then go with the 6 puck.

I think James got his 6 puck for $500 exchange or something like that.

If you want to compare the two, just let me know and we'll go for a spin out to James place so you can feel his, and feel mine - clutch that is !!!!

J

Cubes Grand Master

Cubes

Posted
Posted

I went a Heavy Duty with 30% more clamping pressure ORGANIC Clutch.

At first I was happy with it but soon realised after a really hard launch at High RPM's the Organic compound would fade and cause second gear to slip with a hard change.

Go for a Kevlar based clutch with at least 30% extra clamping force. 30% isn't that much more noticible and still allows you to sit at the lights without you leg shaking.

Don't go Organic. Really depends on how much grip you are getting. If I launch at 4200-4500rpm it will fade the clutch. Organic has a higher fade degree so it can handle it.

When I say launch I don't mean dump the clutch, I mean ride it out at 4200-4500rpm to minimise wheel spin while the turbo is at max power.

This allows IF you run low tyre pressures and a decent set of tyres to get no wheel spin in first and allows you to sit next to a 4wd Launch and even bog you down if you give it to little revs. Depends on road surface also.

Don't waste your time with Organic. If I remember on SDU GTRBen or previously GTS4Ben used to use a Kevlar clutch and could ride the hell out of it yet it still would not slip or burn.

whatsisname Grand Master

whatsisname

Posted
Posted

I run a 9 puck ceramic cushion button single plate with a 1016kg pressure plate (had it tested). Heavy on the leg - yep! I needed to get both master & slave cylinders full reco'ed to handle it! Driveable - easy as pie. Doesn't mind a you giving it a bit of slippage. Hasn't slipped on me yet.

Clutch kit cost - $720

The stock GTS25t pressure plate is supposed to be rated @ 800kg according to a few local websites. I've since been told this is incorrect & it is actually 650kg!? If so 1000-1100kg is a decent upgrade!

Doc Rookie

Doc

Posted
Posted

I have a similar problem to CanberraR33, but only get the burning smell after a hard launch (lasts for a few days) and it is definitely slipping on full power at high revs. Don't want a button clutch as it is a "daily driver". Jay95R33 and -Joel- , where did you get your clutches from? Anyone else suggest where I can get a good R34 GTR clutch?

Cubes Grand Master

Cubes

Posted
Posted

whatsisname.. $720.. is that all for a 9puck?!?

I would probably go that over a kevlar standard when this clutch dies.

Do a search on SDU as GTRBen or GTS4Ben = same person... used to use the Kevlar's. I havn't used one only a organic that like a standard set of brake pads fade hence slip.

So Matt.. we will soon see a change of those best ET's in your sig soon.. :P Good Luck.

whatsisname Grand Master

whatsisname

Posted
Posted

Joel,

I got a good price :P But they don't retail for much more anyway. This is basically the same kit - http://www.horsepowerinabox.com/mall/ck06.asp

Ring ACS/Xtreme & get a quote for the 1050kg pressure plate kit.

I'm hoping the ET will come down by @ least 0.1sec :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 677_GTR
      R33 GTR running -9 with no tune

      By 677_GTR · Posted

      Hi guys, I’m new to the GTR scene. Picked up an R33 GTR earlier this year that needs a lot of love. I’ve been going through the hot side, changing all the gaskets and while it was all off I managed to score a set of -9s. It still had the stock ceramics so I was pretty happy to get the 2860s.  I live in a small country in the pacific with 0 performance car scene. No dyno’s no performance parts, let alone stock parts for a skyline. I order everything from Australia and do it myself. This means I’ll be running the stock ECU. Maybe down the track I’ll get an aftermarket set up and do a remote tune.  Will the car run -9s on stock tune safely?  I have a very heavy foot so I really hope so 😂   thanks guys   
    • Duncan
      Leaking Rear Subframe Bushing?

      By Duncan · Posted

      perfect, no rush to address the leaking bush then, it's not doing much/anything
    • GTSBoy
      Does RB25DE Neo lower intake work with RB25DET Neo Upper intake manifold?

      By GTSBoy · Posted

      I'm not sure if it will bolt up, but.... I'm reasonably sure that the ID of the runners is somewhat smaller on the NAs. So it probably wouldn't be a good match at the flange where the top and bottom meet. So that would be a reason to not do it. And the skinny runners would be the bit you're keeping, which would be a reason to no do it. You'd want the big runners if you were doing any work to swap stuff. Why not just use what you've got, like nearly everyone else who has +T'd an NA? You don't need or want the TCS throttle or other stuff that is specifically DET inlet/crossover.
    • TurboTapin
      Leaking Rear Subframe Bushing?

      By TurboTapin · Posted

      lol already been put in temporarily 3 years ago
    • nouveau_poor
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By nouveau_poor · Posted

      Makes sense. For actuators, if the pressure itself isn't adjustable, that would mean I'd need to think about 2 different actuators with 2 different pressures on paper in order for them to work at the same time if the turbos behave differently. So measure the difference in psi needed to move both, and then get an actuator to match that difference. Assuming I cant get rid of it by adjusting the arms.  You're exactly right, never happens in gear 1 or 2. I can occasionally get it in gear 3 if going uphill but its very small. Only ever in 4 and 5. Seems kind of backwards that one of the points of VCAM is faster spool but if it introduces shuffle then it actually slows spool down. 
×
×
  • Create New...