Jump to content
SAU Community

Recommended Posts

I have a 94 gts25t r33 skyline, it says its got about 56k on the clock, which i somehow find hard to beleive for a vehicle nearly 10 years old, the car seems to run fine, with the only thing replaced according to the car yard i bought it from being the clutch, and a few other things so it was eligable for complience.

1. My question is, how can I determine the real amount of kilometres it has driven? someone mentioned a compression test on the cylinders? ( I COULD BE QUITE WRONG HERE )

2. It has a silver sticker on the engine with the nissan text, logo, some writing in japanese, and down the bottom a very clear 100,000km's written. Does this mean this car has had a 100k service????? I hope this isn't the case although I wouldn't be too suprised :).. The car didn't have service history, so it is hard for me to tell what the deal is, it's running okay I say again, but I'd just like to know roughly what these things are..

:P

Cheers

comp test always good to see how teh engine is regarless of indicated kms

silver sticker is teh timing belt replacement km sticker...........

If that belt was put on in OZ during compliance just for maybe...

if put on in Japan shes been wound back

it definately isnt from teh factory

you buy a timing belt you get the sticker

I import alot of front cuts only the 80k kms plus ones have them

seeing teh residue on a sticker thats been removed is a good indicator you've been dialed back also

Thanks MrMayhem.

Is it illegal for people to sell cars claiming certain kms clocked in, knowing that the clock has been wound back? from a car yard eg: toyota dealer, selling this as a used vehicle. I have a feeling it would be breaching some agreement maybe even just within thewarranty I have with the dealer. Any ideas what the deal is with the law regarding this, thanks in advance.

Cheers

as far as i know, that silver sticker says in jap 'replace timing belt at 100,000km and comes factory. when it is replaced, it is written on or near the sticker, indicating the exact km when it was changed. my skyline has the sticker and its done 75k km.

pic attached, looks like another sticker has been stuck next to the factory one, and written on.

Is it illegal for people to sell cars claiming certain kms clocked in, knowing that the clock has been wound back?

Dont know but not a very ethical way to be running a business.

When i picked up my R32 a couple of years ago, their was a grey R32 in the same yard. Had adjustable control arms, and Teins and susp work up the bazoo, exactly what i wanted.

It even had less kms then the silver one i ended up buying. The silver was a nicer looking car, and essentially stock, but hey i had never owned a nice looking ride so didnt care, my heart wanted the grey one.

Imagine my surpirse when the car yard owner said dont buy the grey one, theres no way the kms are original and the silver car is the one to have... and i might add he was right the car has been great.

There isnt much Aus dealers can do when they are wound back in Japan, except do as this individual did and bring it to the buyers attention.

As for timing belts, well i change it and a few other things when i buy a car, kind of like tranferring the rego. You never know.

  • 10 months later...

We'll here's my timing belt sticker and it looks like it was changed in Japan @ 95017km on the 8th month of the year H12 (2000)

The belts on the fan and the alternator look pretty new. But I think I have to squeeze under the car to inspect the timing belt don't I?

it definately isnt from teh factory

you buy a timing belt you get the sticker  

Maybe you do.. but it also comes from the factory.. as every GTS-T i have seen has one on there. They will generally write the km it has been changed in pen or the like if it has been changed - like HappyPuppy's pic shows.

Km on a skyline are largely irrelevent, and it disspoints me to see buyers say things like "oh I'm looking for a skyline with 60,000km, yours is 90,000km and not worth looking at". These are not local cars people!! Most of the winding back has been in japan, where its actually illegal also.

If you could find *evidence* that a local dealer did it, you could get them in trouble - getting that would be nigh on impossible, and most of the time its been done way before it gets into local hands. Most dealers know that, and like Roy says, some will even be honest about it. Likewise you can simply change the whole instrument cluster (an 30minute job) and you'd be none the wiser.

Glenmcrae: A compression will only give you a bit of a general indication of the internal strength left in the engine. It will not tell you km at all, as compression could be way down on a car with a genuine 60,000km or fine at 200,000km.. all on how the car has been treated. More modifications will often mean that the engine compression may be otherwise worn premeturely. Often more boost = more pressure on the pistons, rings, head gasket, valves springs, etc and may result in reduced compression over time.

The only real check is to just go on visuals such as paint fade, seat wear, steering wheel, gearboot and handbrake boot wear, carpet wear, and the number of small scratches, etc -- in the end it doesn't really matter. If the car is running well, looks good, and everything else, the km are the last thing you should worry about. .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Very nice - I also have a 92 GTST and hardly see any others around these days
    • When I need something else to edit, I use Movavi. A friend who does video editing on a daily basis recommended me) it's an easy video cutter to use for beginners
    • I need to edit some videos for work but I'm not good at all this. Which video editor can you recommend?
    • I think you're really missing the point. The spec is just the minimum spec that the fuel has to meet. The additive packages can, and do, go above that minimum if the fuel brand feels they need/want to. And so you get BP Ultimate or Shell Ultra (or whatever they call it) making promises to clean your engine better than the standard stuff....simply because they do actually put better additive packages in there. They do not waste special sauce on the plebian fuel if they can avoid it. I didn't say "energy density". I just said "density". That's right, the specific gravity (if you want to use a really shit old imperial description for mass per unit volume). The density being higher indicates a number of things, from reduces oxygen content, to increased numbers of double bonds or cyclic components. That then just happens to flow on to the calorific value on a volume basis being correspondingly higher. The calorific value on a mass basis barely changes, because almost all hydrocarbon materials have a very similar CV per kg. But whatever - the end result is that you do get a bit more energy per litre, which helps to offset some of the sting of the massive price bump over 91. I can go you one better than "I used to work at a fuel station". I had uni lecturers who worked at the Pt Stanvac refinery (at the time they were lecturing, as industry specialist lecturers) who were quite candid about the business. And granted, that was 30+ years ago, and you might note that I have stated above that I think the industry has since collected together near the bottom (quite like ISPs, when you think about it). Oh, did I mention that I am quite literally a combustion engineer? I'm designing (well, actually, trying to avoid designing and trying to make the junior engineer do it) a heavy fuel oil firing system for a cement plant in fricking Iraq, this week. Last week it was natural gas fired this-that. The week before it was LPG fired anode furnaces for a copper smelter (well, the burners for them, not the actual furnaces, which are just big dumb steel). I'm kinda all over fuels.
    • Well my freshly rebuilt RB25DET Neo went bang 1000kms in, completely fried big end bearing in cylinder 1 so bad my engine seized. No knocking or oil pressure issue prior to this happening, all happened within less than a second. Had Nitto oil pump, 8L baffled sump, head drain, oil restrictors, the lot put in to prevent me spinning a bearing like i did to need the rebuild. Mechanic that looked after the works has no idea what caused it. Reckoned it may have been bearing clearance wrong in cylinder 1 we have no idea. Machinist who did the work reckoned it was something on the mechanic. Anyway thats between them, i had no part in it, just paid the money Curiosity question, does the oil system on RB’s go sump > oil pump > filter > around engine? If so, if you had a leak on an oil filter relocation plate, say sump > oil pump > filter > LEAK > around engine would this cause a low oil pressure reading if the sensors was before the filter?   TIA
×
×
  • Create New...