Jump to content
SAU Community

The Last Of The Monaros To Be 500hp...

Big Rizza

By Big Rizza,
in General Automotive Discussion

 Share

Recommended Posts

Big Rizza Mentor

Big Rizza

Posted
Posted

The final 50 Monaros to be sold in the UK will be factory supercharged to make 500hp / 677Nm, and be badged the Monaro VXR 500. Plus, it will be cheaper than the standard 400hp model! And they're offering the supercharger as a retrofit for anyone who already bought their Monaro. All with a factory warranty!

Driving impressions: http://www.pistonheads.com/roadtests/doc.a...=47&i=15379

Why is it that the UK market always get better cars than we do? Even when we built the car in the first place! We missed out on the Mitsubishi Evo VIII FQ400 MR in just the same way. Local manufacturers & distributers seem reluctant to offer factoy backed aftermarket parts that won't void your warranty, which is just crud because it happens overseas all the time. It's starting to pick up, with the sprintex supercharger kit for Magna and the Oettinger ECU reflash for Golf GTi both allowing you to retain the standard warranty, but neither are fitted at your local dealership. About the only true factory aftermarket kit in Oz is the Mini Cooper Works kit.

So what do you reckon? Is the 500hp Monaro the shit, or just plain shit? Is there a market for the factory aftermarket here in Oz?

Link to comment
https://www.sau.com.au/forums/topic/143306-the-last-of-the-monaros-to-be-500hp/
Share on other sites
ob1 Community Regular

ob1

Posted
Posted

not to mention the monaro version that was shipped to the states as the Pontiac GTO was sold cheaper over there than here due to "market pressures" ?!?

If thy are only selling 50 in the UK, then there is most definitely a market that big or better here. What was the yearly sales figures of the last monaro? 100's im sure.

scathing Grand Master

scathing

Posted
Posted

That'll be the PWR intercooler kit, then.

Motor did a review ages ago, and apparently it was going to be offered as a dealer fit option (as well as being a warranty covered retrofit on any LS1 engine in the Holden range).

Never heard anything official about it, though.

mad082 Grand Master

mad082

Posted
Posted

why don't we get it? 2 reasons. 1. the same reason why the detuned the ls1 before the put it in the aussie monaros, but not the british and american ones. cause they think we are a bunch of hobo's that don't get cars serviced (and they might not be too far off the money on that one. not everyone, but a lot of people leave their servicing well past the recommended time)

2. it isn't holden selling them in the uk. it is vauxhall. so holden has no control over the situation. it is similar to how corsa got the monaro then took it from 300kw to about 330kw.

scathing Grand Master

scathing

Posted
Posted

Actually, most manufacturers think the US guys are more service-phobic than Australians.

Its why the Japanese didn't try bringing in a lot of their turbo cars into the US for ages, since as we know turbo cars are more sensitive to "oil change and tune up" intervals than NA cars. Especially the simply engineered, long stroke, high capacity engines that the US guys seem to love.

evil_weevil Grand Master

evil_weevil

Posted
Posted

man, that sucks big time, wish I was living in the uk again! (mind you I coudnt afford one anyway!)

All this talk, makes me wish I still had my LS1 :)

dam darkside of turbo's! :)

siksII Grand Master

siksII

Posted
Posted

i thought the supercharged monaro was always available in the UK from years back, i definetly have CAR UK mags that have it listed in the back section from at least 2 years ago... im not at home atm otherwise i would double check but i am 90% sure...

they also got the racelogic traction control in their monaros.

evil_weevil Grand Master

evil_weevil

Posted
Posted

I met up with the LS1 owners in the UK back in 2003 - theres a the GTS-R (VT GTS 300 here) and he had the whipple blower on it however he did it himself. the GTS was our R8 over there also. was quite a good site seeing 5 HSV's over there! (yes yes I have a very big soft spot for them)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Feedback on these “rebuilt” Nismo injectors

      By Duncan · Posted

      I wouldn't be concerned at all, other than to suggest having them flow tested when you receive them to confirm they are reasonably similar, and then put the highest to lowest flowing ones in cylinder 6,1,5,2,4,3
    • jacobzking
      Feedback on these “rebuilt” Nismo injectors

      By jacobzking · Posted

      I’m only posting this cause I thought I had seen a bad review on these somewhere before. Any feedback? Would you guys recommend that if I do buy these I send em to RC to have em checked before installing. Or any other suggestions?   https://www.ebay.com/itm/114009965865?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=JDl-15yLQ8C&sssrc=4429486&ssuid=QTzlFXB1S-S&var=&widget_ver=artemis&media=COPY
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
    • PLYNX
      BCNR33/ECR33 Door corner piece replacement

      By PLYNX · Posted

      Oh yes done this when the window started flopping around.  Turns out the guides that run along the rail chanel had crumbed way. Took off the door card and pulled out the window mech, then the window, which you have to pull out through the top. As said unbolt the guide rail and don't spend 30 minutes getting frustrated trying to find a way to slide it out upwards cause that don't frigging work. Drop it down and out through the door hole. All I did to repair it was slice some 10mm clear plastic tube, vertically, then screw it to the guide rail both sides. This tubing rolls inward on both sides and leaves a gap wide enough to hold the window. To finish all I did was lube the plastic tube with olive oil and Bob's your uncle . . . well if he has the operation he can be your Aunt ! !  10 bucks in plastic tube and another 5 minute job done again . . . . YEH BULLSH#T ! My love for Skylines knows no bounds !
    • BourneToLive
      R32 GTR Park lights issue

      By BourneToLive · Posted

      So was there a solution to this problem? I’m having this issue now. 
×
×
  • Create New...