Jump to content
SAU Community

Recommended Posts

What I do, is when I get out of the car, instead of just going ahead and touching the metal and getting zapped, I hold the key near the key hole. You see a little spark, and you don't get zapped.

For you to get zapped, the point of contact with the metal needs to be a part of you.

I was told the tyres rotate and pick up charges or something like that and that was the cause.

Maybe it is my clothes....I'll try cotton tommorrow and see if this works.

Also, this looks like it happens to every-one then? :rofl:

When you open the door, keep a hold of it (As if you would if another car was parked closely) but hold on to the END of the door, so that you're touching metal, then stick your foot on the ground. No more zappy...

I have to get back into this habit...

Both my cars have earth straps (Can't see them though) so I got out of the habit, and now I get booted in every friends car!

So the answer would be to get a rubber strap :)

Surely we can give an electrical discharge circuit to the front seat so we don't pick up this static....

Is the solution that easy though?

Think....your not just on here to check other peoples avatars are you? :)

Could you run a rubber strap from some part on the chassis onto one of the tyes? They're grounded, and you wouldn't be able to see the strap if you positioned it well

Good thinking there...except it does not have to be on the tyre all the time ......just when you open the door.

Maybe a pulley type ...simple set up that operates on a wire connected to a rubber?

Maybe to much over-kill.....

STILL LOOKING. :P

If we come up with an idea...we will patent it and make lots of money :D

Something i saw other day on youtube was quite disturbing, involved static electricity a car and a petrol bowser.

Overkill is great, as long as people buy it.

Could just set up a servo to automatically reset itself to off position (which would be facing down, at the tyre) whenever the power is cut to it, my old remote control car used to do this once turned off.

Something i saw other day on youtube was quite disturbing, involved static electricity a car and a petrol bowser.

Overkill is great, as long as people buy it.

Could just set up a servo to automatically reset itself to off position (which would be facing down, at the tyre) whenever the power is cut to it, my old remote control car used to do this once turned off.

The only trouble would be for a Turbo Timer....It would have to be when the door is opened.

:P

We are getting some where :sorcerer: :sorcerer: :sorcerer:

The factor is, the type of rubbers in the tyre doesn't allow the car to discharge at all.

Well, actually, if you notice, it's normally the spark jumping from YOU TO the car...

This tells us, the electrons (The part of moving electricity) is moving from person, to car.

Hence, we have more electrons in us, then what the car has.

Hence, our body has more electrons in it.

What this tells us, is the car is actually insulated from earth.

Hence, we are moving electrons from the earth/us, back into the vehicle to create an equalisation

Hence, when you jump out, and make a connection, you get zapped.

BUT, if you connect to the car first, and then connect to earth, you don't feel your foot being zapped (Due to large surface area etc)

Hence, GRAB THE CAR FIRST, THEN step out.

Or, fit an earth strap. My R33 has a strap, and you can barely see it at all, unless you look under the car.

Why bother making something new and expensive, when there is a cheaper, easier alternative available.

To many Hence.....in your report MBS206.... :D

Still am not giving up...a strap looks like your driving a Camry(Not that they are bad cars) or something,

What you are saying is the electrons charge us in the car as we are driving.

When we go to exit the car without dis-charging these back to the car, we get zapped.

If this is correct why don't we have a car earth on the door handle.

Is it that simple?. ;) ....maybe not. :D .....is this the cure? :)

Or is it more simple than that? :laugh:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haven’t had the chance to drive it yet with work being a nightmare, will definitely be doing that at some point this week. got these so that grip won’t be an issue at roll racing  
    • The cross sectional area of a circular hole scales with the square of diameter. So a 2mm diameter hole is 4x the area of a 1mm hole. Not double. The 1.7mm hole is nearly 3x the area of a 1mm hole. You do not need restrictors at both ends of the oil supply line. If you have new, additional restrictors at the turbo end, that you did not have before, then you do not need a restrictor at the inlet end.
    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
×
×
  • Create New...