Jump to content
SAU Community

Wanted To Buy


Cubes

Recommended Posts

wanted!!! can anyone replace my heater core for my 34 plz will pay

Hey mate,

Is it turbo on N/A, man or auto? Have u got a whole new box or just the core?

Let me know and i may do it.

Luke

Link to comment
Share on other sites

Hey mate,

Is it turbo on N/A, man or auto? Have u got a whole new box or just the core?

Let me know and i may do it.Hey Luke i got a 34 4door n/a auto n i got a 2nd hand core in good nik if u can do it let me no 0433023894

Link to comment
Share on other sites

Hey mate,

Is it turbo on N/A, man or auto? Have u got a whole new box or just the core?

Let me know and i may do it.

Hey Luke i got a 34 4door n/a auto n i got a 2nd hand core in good nik if u can do it let me no 0433023894

When you click reply, dont delete the part that says

[/quote]

Link to comment
Share on other sites

When i did mine i replaced the whole box. Tried getting just the core out and started braking shit. If u can get the whole box it will be alot easier.

cheers Luke but btw did u hav 2 remove the whole dash 2 get into it?

Link to comment
Share on other sites

cheers Luke but btw did u hav 2 remove the whole dash 2 get into it?

yeh I did. If u can get a whole box I'll do it. I know where all the screws are and got all the tools to remove it.

Link to comment
Share on other sites

WTD: Side feed injectors suit RB25 700+cc

Will consider anything over 550cc!

pm ceff1e on here.. he does 740cc highflows.. for 300ish

i got a set :thumbsup:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I am impressed with all this level of adjustment. I didn't expect all this possibility
    • Correct.  In the case of the 500kw dyno plot I showed you the car actually runs two boost control solenoids for boost control and a 5psi wastegate spring.  It allows me to control how much boost pressure is applied to both sides of the wastegate valve at any point and fairly accurately control boost target as a result. I've tuned it so that it's able to target anywhere from 5psi to 25psi depending on what's needed.  The target tables I've set up in that car are Gear vs RPM, so every gear has potential for a different boost (and torque) curve.   First and second gear have quite low boost targets, third gear actually has different target boost all the way through the rpm range as it's a stock RB25 gearbox - the boost targets have been chosen to maintain a peak of 600nm (what the owner has set as the maximum torque he's happy with putting through the stock 3rd gear) but it carries that to the rev limiter.   The boost curve to achieve that is something of a ramp up, then hold, then ramp up again and the power curve looks more like a flat line haha.  
    • so you can decrease or increase the boost depending on the diet as you wish?     by acting on the wastegate?
    • That's torque and power, it's all from a single run.  The boost curve is "held back" from it's peak target in the 3500rpm to 5000rpm range from memory, so it ramps hard to something like 18psi then climbs more progressively to 23psi nearer 5000rpm.   It makes the torque (and power) ramp more "natural" and less hard on parts and traction, it doesn't feel artificially held back.   
    • Here's the torque curves from the car I ramped boost up later in the rpm to allow a slightly wider useful power curve - the power curve is a bit weird shaped also thanks to the TVIS (or whatever they call it with the 4EFTE in this Starlet) which changes the volume of the intake manifold throughout the rpm range, but you can see that the green power curve actually holds later on with the extra boost... but looks almost more like the kind of thing you'd expect from a cam or exhaust change
×
×
  • Create New...