Jump to content
SAU Community

Recommended Posts

wtb

R32 disk rotors. Set of front and rear or let me know if u have a pair. Just need cheapys to get it going. Aslong as they have meat im not fused on slotted or std

Skyline braided brake lines to suit 32 calipers

R32gtr rear swaybar

Anyone wana swap 25mm bolt ons for 15mm ones? Hubcentric of course

Thanks

Matty if u can get hold of a couple of panel filters this is going cheap

http://page10.auctions.yahoo.co.jp/jp/auction/m75373880

nengun sell them new for 140ish shipped, but im tryin to work out which 2 i need, the kit says a B and a C, but the model indicator highlights and A and a B :S

wtb:

part of the rb25 loom where it plugs into the alternator.. my end has broken off so i need to solder a new end on..

rb25det intake manifold to head. i need 2 of the bolts that bolt the manifold onto the head.

cheers

wtb

R32 disk rotors. Set of front and rear or let me know if u have a pair. Just need cheapys to get it going. Aslong as they have meat im not fused on slotted or std

Skyline braided brake lines to suit 32 calipers

R32gtr rear swaybar

Anyone wana swap 25mm bolt ons for 15mm ones? Hubcentric of course

Thanks

Adrian try getting some HEL braided lines to suit R32 off ebay....they are $160 something and work well

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Great to hear you are bringing it out of the shed again. Unless you have specific issues I'd just add the wideband, get a good tune and enjoy it. Certainly no point changing coils etc if they are working. If would add fuel pressure and e85 sensor if you are doing a general update but not if it runs OK and you are just getting it back on track. The other thing is smaller, modern twins, -5 are OK for motorsport but pretty laggy and old tech for street use (of course, if performance is the priority a modern single with twin scroll manifold etc is the go but not cheap). The final thing worth considering is switching to an ethrottle if drivability is still an issue, it should make things a lot simpler and smoother
    • Yeah pretty sure they are m4, but best to check, and perhaps use new hardware Also don't over torque them......there was that one time I lost an expensive engine after a workshop overtorqued one of those bolts and it ended up in the oil pump (no, I don't know why they removed the intake mesh either)
    • I might have to shoot them an email. Pity the exchange rate is so bad at the moment. BTW, thanks for posting that table makes interesting reading. 
    • Add these Sensors -Wideband, Oil Pressure, Fuel pressure, Intake air temp Good inspection of ignition system of coils, plugs and loom (12v feed and good ground)- a r35 kit is best bang for buck upgrade. A decent tuner should be able to see any issues with the trigger system- a link has good filtering but a good simple upgrade is the nz wiring bolt in kit. Check and replace all the fuel filters- you would be surprised at intank filter after a few years. Also good to check for any leaks on vac hoses and pipe work as has been said. No need to go overboard and spend big $$$ to enjoy the car. A quality tuner is getting harder to find as anyone with a laptop thinks they are a tuner. A link has great features to check sensor voltages and frequency inputs and easy to see live by pressing f12. The link can do a TPS & RPM fuel/ignition mapping on ITB cars then add a 4D table with MAP and ability to add a 5D to it (can help with economy at cruise with wheel speed vs TPS) Where are you located as that will help narrow down a good tuner ?
    • Reviving an old thread, I reckon my stagea is starting to slip. Car usually gets parked on a hill, narrow driveway so cant go up the driveway smoothly, anyhows, lately first gear feels "sluggish"? Not responsive. Feels like I gotta run the engine more than usual to get off the line...  Any recommendations for transmission servicing in Sydney? Or possibly just an excuse to go manual ?
×
×
  • Create New...