Jump to content
SAU Community

Wanted To Buy


Cubes

Recommended Posts

you're a fool

you're a fool also

i know you are but what am i

he made up a custom screamer pipe for my mate and it doesn't even scream because it appears the part that goes into the exhaust housing on the turbo is jamming the gate shut.

yeah thats awesome !

Link to comment
Share on other sites

i know you are but what am i

he made up a custom screamer pipe for my mate and it doesn't even scream because it appears the part that goes into the exhaust housing on the turbo is jamming the gate shut.

yeah thats awesome !

that would mean that he would be over boosting something fierce and wouldnt have a turbo left or a motor.

Link to comment
Share on other sites

its not over boosting.

well the gate wouldnt be stuck then. if the gate is stuck and not open the excess boost wouldnt be realeased and therefore create the over boost. obviously the gate it opening and operating as per usual. could he have a straight through exhaust as i cant hear my screamer over my zorst and the screamer dumps are not very loud. need external gate for that shit. or he has made a split dump and plumbed it back in so it like normal but better flowing

Link to comment
Share on other sites

the screamer one. if it aint over boosting or its not makeing noise i dont understand.

it has to do either or ur turbo is f*kd and not spooling

the custom plumb back one wont scream as its plumbed back in.

Link to comment
Share on other sites

and even if he did bork the install Andrew would honor his product as boostsomething made an incomplete install of mine not their fault my rear housing was wrong and Andrew fixed it

Link to comment
Share on other sites

LOL

if its an external screamer and it doesnt scream then there are two possible issues here

1. the gate isnt opening at all (car would be boost spiking

or

2. the car is so loud that you cant even hear if its venting externally.

the fact is. instead of bagging something on a forum. if there was a problem with the product then why dont you just take it up with andrew?

Link to comment
Share on other sites

And if the dump was faulty Andrew would honour his product 100%

Think your mate borked the install

think your wrong. he is a mechanic.

LOL

if its an external screamer and it doesnt scream then there are two possible issues here

1. the gate isnt opening at all (car would be boost spiking

or

2. the car is so loud that you cant even hear if its venting externally.

the fact is. instead of bagging something on a forum. if there was a problem with the product then why dont you just take it up with andrew?

its internal gate.

ok sir.

Link to comment
Share on other sites

Mitch, I have no idea wtf you are on about here :turned:

if its jammed the wastegate shut then it would be free boosting and popping your turbo, or better yet your mates bottom end? What your saying makes no sense......... must be a shit car lol

Link to comment
Share on other sites

mechanics dont always know what they are doing.

i had to go fix a certain auto 33 as a certain large mechanial workshop with like 20 stores around adeliade never mind aust wide cause it kept cutting out.

simple determination was his t piece was crap and winding out spiking his boost and the ecu was shutting it down.

even tho the ecu that was being run was a power fc which was tuned in mt barker by reputable large mechanical workshop.

you only know what you deal with mechanic or not

and mitch out of all of this i am not bagging you but seriously i am so confused.

if not tell him to come past mine. i can find it easy as hell.

Edited by sneaky1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • And by the way, I've also checked the ECU diagnostic numerous times and got a bad O2 sensor code and initially an Ignition Primary code, which is why I replaced the O2 sensor and all the ignition components (coil packa, plug and loom). No codes have been coming up lately despite the ongoing issue.
    • Hey pber13, unfortunately still no luck. At this point the following has been done with little or no success: - Spark plugs replaced, gapped to 0.8mm - Splitfire coilpacks installed to replace originals - Replaced Ignition Coil/Coilpack harness with a new genuine nissan one - New fuel filter - Replaced AFM/MAF sensor - Injectors have been thoroughly cleaned with an online flush (without removing) - Upper engine and inlet decarbed - blew tons of black smoke out, cleared the carbon deposits from the top of the engine and exhaust.  - IACV removed and thoroughly cleaned with carburettor cleaner - O2 sensor replaced with new and genuine one -  Smoke test revealed no vacuum leaks - Healthy compression test of 160psi across all 6 cylinders Overall the car does run a lot smoother now, no backfires between gear shifts like it did originally... but the rough idle when warmed up is still there. It may not even be a misfire but simply a rough idle. Seems crazy to me that so many people have had this issue and seemingly no one has gotten to the bottom of it, or at least never bothered to post if they did! Hope you have more luck than I did pber13, I'm at a point now where I'm just going to try to ignore it unless it gets worse. Would love to fix it but I've genuinely run out of ideas of what it could be.
    • I got the full frenchys kit too. Really awesome kit. Easy to install my only complaint was the hardlines I think could be routed differently (I modified mine) but I realise the kit needs to suit multiple applications. This was the hard lines before I modified them. They were touching the wastegate pipe. I ended up reducing the distance between firewall and first bend. The made it so they tucked along the frame rail.
    • Deeve, I don't suppose that you've made any progress on this? My Stagea has the exact same problem, and just like you, I've read through as much as I can online, with no real progress. My car isn't throwing any codes at all, which is a little frustrating. I've changed plugs, checked the wiring and harness. A new MAF gets here next week, but I'm not hopeful it will solve the issue.
    • I installed it all myself,  It was really easy to install.  I got a professional to do the degas/gas.
×
×
  • Create New...