Jump to content
SAU Community

Wanted To Buy


Cubes

Recommended Posts

Wtb 17 inch rims suit 4 stud (4x100) in decent ish condition, can vary, without tyres preferably unless it has 205/40/17's

for a nissan nx-r as its now my new daily driver. Pm me with details or txt - 0422360999

not looking to spend to much (couple of hundred)

Link to comment
Share on other sites

hey looking for a set of rear 5 stud hubs.

doin 5 stud conversion on my laurel but the rear hubs i bought dont have bearings and apparently you cant buy the bearings seperate from the hubs.

cheers.

Link to comment
Share on other sites

Free or cheap as chips , rb25det NEO r34 alternator not r33 not the same config

Gtr r34 alternator would work too

Can be dead or alive and needs pulley still

Must have a unbroken case

Its for a project to benefit sau in the long run

Pm me

Cheers

Link to comment
Share on other sites

Wtb 17 inch rims suit 4 stud (4x100) in decent ish condition, can vary, without tyres preferably unless it has 205/40/17's

for a nissan nx-r as its now my new daily driver. Pm me with details or txt - 0422360999

not looking to spend to much (couple of hundred)

also after some 235/40/18 tyres (prefer as much tred as possible)

cheers all

Link to comment
Share on other sites

Urgently Wanting To Buy: R33 series one front bumper, MAYBE reo bar if i cant straighten mine out.

Can be any colour (although my car is black), stock or bodykit, as long as its good condition.

My brakes failed and ive stuffed up my front end and need one asap so i can get to work.

Reply via here, or more preferably via my mobile 0401 031 323 Much appreciated :)

Link to comment
Share on other sites

Urgently Wanting To Buy: R33 series one front bumper, MAYBE reo bar if i cant straighten mine out.

Can be any colour (although my car is black), stock or bodykit, as long as its good condition.

My brakes failed and ive stuffed up my front end and need one asap so i can get to work.

Reply via here, or more preferably via my mobile 0401 031 323 Much appreciated :)

Bumper has been purchased.

I now urgently need a r33 series one front bar reo. cheapest ive seen so far is 180 from a wreckers, so if you can beat that and you contact me on my number provided above before 5pm today you have yourself a sale :)

Link to comment
Share on other sites

WTB:

S13 / R32 on front seats with rails (pair). Fabric doesnt have to be in the best condition, as long as they have rails complete, the slide mechanism works and seat structure itself is fine

For a friend's project car

Contact via PM

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Much less twat-tastic. CF wheels are too garish for civilised use.
    • From there, as the manual says....assembly is the reverse of disassembly, no tricks worth mentioning Much better (for me)
    • In my case, the standard wheel I had was in good condition but the buttons had more wear, so I swapped them across from the original wheel from the car. The plastic rear cover is held on by 4 tabs, and once the wiring is removed you can get access to 2 screws on each side the hold the buttons in From there I just swapped the wiring over. What was interesting is the standard style wheel is 2.0kg but the carbon fibre one is 50% heavier at 2.9kg. It even has a weight inside the wheel at the top to make up for some sort of imbalance in the design. weird
    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stomp on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
×
×
  • Create New...