Jump to content
SAU Community

Wanted To Buy


Cubes

Recommended Posts

Items:

Looking for 33 or 32 turbo oil and water lines must be the larger holes with bolts

Contact details:

Daniel on 0430942264 text only

Price and price conditions:

Name ur price I know that second hand there around 60 odd from Jdm spares

Link to comment
Share on other sites

Items:

front and rear standard suspension to suit 1998 R34 GTT

Contact Details:

PM

Price and price conditions:

open to offers for a set in good operating condition

Cheers!

Link to comment
Share on other sites

Looking for a track car.

Cheap as f**k, around $3k or less.

Dont care of its condition or rego status.

Looking for a 32, s13, 180sx or Ceffy. NO 31's, keto's, commo's etc

Will take a complete rolling shell if it's what I'm looking for.

Link to comment
Share on other sites

Items:

Skyline GTR 33 rear spoiler black.

Skyline GTR 33 Interior. Seats including rails both front seats and the rear. Door Trims both front doors.

As shown in picture below.

http://image.modified.com/f/15585572/0502_07z+1997_nissan_skyline_tommykaira_r_r33+front_interior_view.jpg

Contact Details:

PM

Price and price conditions:

Open to all offers depending on condition.

Link to comment
Share on other sites

Wanted r32 rolling shell

Want r32 rolling shell or repairable write off

Any condition considered

Email: [email protected]

Would you consider a defected 32 gtst m spec, whiteline sway bars front and rear, locked diff and stocker too, reasonably clean interior and exterior, running rb20det, manual, lete know if you want a suss.

Link to comment
Share on other sites

Anyone know where i can buy Motul Oil from?

Need some 2T (rather not pay $50 @bills) plus engine oil for the 33.

My local stores dont have it, location preferably CBD or South.

Link to comment
Share on other sites

Anyone know where i can buy Motul Oil from?

Need some 2T (rather not pay $50 @bills) plus engine oil for the 33.

My local stores dont have it, location preferably CBD or South.

Autobahn

Link to comment
Share on other sites

WANT:

looking for just one 20 inch mag with dish, preferably 10+ inches wide.

Would you consider a defected 32 gtst m spec, whiteline sway bars front and rear, locked diff and stocker too, reasonably clean interior and exterior, running rb20det, manual, lete know if you want

if he's not interested i might be. not coming to the dinner tomorrow are ya?

Link to comment
Share on other sites

WANT:

looking for just one 20 inch mag with dish, preferably 10+ inches wide.

if he's not interested i might be. not coming to the dinner tomorrow are ya?

nah mate, sick as a dog, the joys of children in child care.

if you wanna have a suss yell out, pretty keen to get rid of it and i'm sick of seeing it in my backyard

Link to comment
Share on other sites

Looking for a track car.

Cheap as f**k, around $3k or less.

Dont care of its condition or rego status.

Looking for a 32, s13, 180sx or Ceffy. NO 31's, keto's, commo's etc

Will take a complete rolling shell if it's what I'm looking for.

Got a R33 you may be keen on.

http://www.skylinesaustralia.com/forums/topic/369903-r33-for-sale-sa/page__p__5895632#entry5895632

3k without the gearbox, it also has coil overs now.

open to offers

Link to comment
Share on other sites

Hi, I'm after a 200SX S15 6 speed gearbox. Need one in good condition, but don't want to spend a ton of $$$ as i'm going to hack it up while adapting it to Datsun L series engine for my Stanza project... I see them on the net from $350 ~$1800 hoping for something in the $500~$700 range. All the ones I see are interstate - hence my post here.

link to my gumtree ad (hope this is ok to post): http://www.gumtree.com.au/s-ad/seaford/engine-engine-parts-transmission/wanted-200sx-s15-6-speed-gearbox/1003803650

Thanks,

Jeff

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Much less twat-tastic. CF wheels are too garish for civilised use.
    • From there, as the manual says....assembly is the reverse of disassembly, no tricks worth mentioning Much better (for me)
    • In my case, the standard wheel I had was in good condition but the buttons had more wear, so I swapped them across from the original wheel from the car. The plastic rear cover is held on by 4 tabs, and once the wiring is removed you can get access to 2 screws on each side the hold the buttons in From there I just swapped the wiring over. What was interesting is the standard style wheel is 2.0kg but the carbon fibre one is 50% heavier at 2.9kg. It even has a weight inside the wheel at the top to make up for some sort of imbalance in the design. weird
    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stomp on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
×
×
  • Create New...