Jump to content
SAU Community

Wanted To Buy


Cubes

Recommended Posts

Wanted to buy

Nissan stock intercooler piping in 2.25in

Stock inlet pipe to suit rb20 turbo

2nd hand r33 turbo, must be cheap and usable

Starter alternator wiring loom to suit rb20

Swaybar saddles and bushes any cond to suit s13

Link to comment
Share on other sites

WTB Z32 Stock ECU , the 8 bit ECU would be most desirale. Can be any JDM , EDM or

1990-1992 USDM model ECU. It does not matter if the ECU is naturally aspirated or turbo,

manual or auto. (Nissan part numbers 23710-30Pxx, 31Pxx, 37Pxx, 40Pxx, 41Pxx, 46Pxx,

47Pxx and 48Pxx).

Link to comment
Share on other sites

WTB Z32 Stock ECU , the 8 bit ECU would be most desirale. Can be any JDM , EDM or 1990-1992 USDM model ECU. It does not matter if the ECU is naturally aspirated or turbo, manual or auto. (Nissan part numbers 23710-30Pxx, 31Pxx, 37Pxx, 40Pxx, 41Pxx, 46Pxx, 47Pxx and 48Pxx).

Cancel that, scored A18-A72 MB6 91 300ZX (late) N M F Z32-VG30DE 23710-30P60 from ebay USA for $30 ..... thats only $300 cheaper than Japco and $240 cheaper than Japanese Import Spares, Adelaide Z cars and Nisswreck.. :-)

Link to comment
Share on other sites

Rb26 long motor in good condition or rebuilt.

rb26 boost control soleniod

thanks

Rb26 long motor in good condition or rebuilt.

rb26 boost control soleniod

thanks

Hey mate have one for sale, give me a call on 0403431194, rb26 long out of a r32 GTR.

DSC02471.jpg

DSC02470.jpg

150,000 km after $2400. Removed turbos etc already and injectors. Everything else is there.

Comp test

Edited by GTR1993
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Much less twat-tastic. CF wheels are too garish for civilised use.
    • From there, as the manual says....assembly is the reverse of disassembly, no tricks worth mentioning Much better (for me)
    • In my case, the standard wheel I had was in good condition but the buttons had more wear, so I swapped them across from the original wheel from the car. The plastic rear cover is held on by 4 tabs, and once the wiring is removed you can get access to 2 screws on each side the hold the buttons in From there I just swapped the wiring over. What was interesting is the standard style wheel is 2.0kg but the carbon fibre one is 50% heavier at 2.9kg. It even has a weight inside the wheel at the top to make up for some sort of imbalance in the design. weird
    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stomp on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
×
×
  • Create New...