Jump to content
SAU Community

Got A New Clutch Installed

Nic19
 Share

Recommended Posts

RaseR Collaborator

RaseR

Posted
Posted (edited)

Hey, I also have this noise...Only just figured out it was the clutch last night, also an exedy heavy duty that was installed by the previous owner...For me it happens between 1000-2000rpm in 2nd-above when applying throttle...Can anyone shed any light on how to get rid of this extremely annoying noise?

Edited by RaseR
RB30-POWER Mentor

RB30-POWER

Posted
Posted

Its not the tail shaft?

Sometimes if you don't index the shaft in relation to the diff, it can upset it. It would have been off the same time the box and clutch was out.

Maybe try rotating it 180deg, if you still have the problem, its more then likely a clutch issue.

stuartlaw_78 Community Regular

stuartlaw_78

Posted
Posted

Hi All,

I also have an Exedy clutch and i'm experiencing the same problem!! Such a pain...

I think i will try taking the tail shaft out and rotating it 180 degrees and see what happens...

Has anybody else tried this?

come on guys, let put our heads together and try different things and see if we can get rid of this vibration....

If anybody happens to have any success, please let us know....

Its not the tail shaft?

Sometimes if you don't index the shaft in relation to the diff, it can upset it. It would have been off the same time the box and clutch was out.

Maybe try rotating it 180deg, if you still have the problem, its more then likely a clutch issue.

stuartlaw_78 Community Regular

stuartlaw_78

Posted
Posted

Actually, I just had a thought,

you mentioned the tail shaft IN RELATION to the diff??

I didn't actually take the tail shaft out at all.. I just slid it out when I took the tranny out...

does it matter how the tail shaft goes into the tranny??

Its not the tail shaft?

Sometimes if you don't index the shaft in relation to the diff, it can upset it. It would have been off the same time the box and clutch was out.

Maybe try rotating it 180deg, if you still have the problem, its more then likely a clutch issue.

RaseR Collaborator

RaseR

Posted
Posted

Pretty sure mine is an exedy heavy duty organic clutch, not button style but it still has the shuddering noise...unless of course I'm wrong about what type of clutch I have (previous owner installed)..

How would I tell if mine's a button clutch? It drives just like a normal clutch, just a bit heavier, really easy in traffic...unlike many button clutches...

siddr20 Grand Master

siddr20

Posted
Posted (edited)

I have an organic excedy clutch bought from C & B from these forums in the group buy..

I havnt heard the noise before in my car.

However with those 3-5 puk clutches and those super super dooper heavy duty clutches you will experience those noises at lower rpms.. Its prefectly normal..

But for a simple clutch you shouldnt be hearin it..

Edited by siddr20
ranicx Veteran

ranicx

Posted
Posted

when i used to have a standard clutch, it was fine with no shudder, but when it was almost worn out and dying, it did start to shudder when sliped. the longer the slip, the worse the shudder got.

shudder went away when i replaced the clutch

ranicx Veteran

ranicx

Posted
Posted
yeah. if its organic. it shouldnt' shudder. but the exedy ones a pretty renound for it.

dave you might remember my clutch had that shudder/chatter noise when i was sliping it at the workshop where you used to work

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Ticking Sound On Idle - Rb25

      By MBS206 · Posted

      Have you put an aftermarket oil pressure gauge on and verified your oil pressure?   Noise being on the block, on exhaust side, how high up the block does it seem to be? It could be the VCT system getting cranky, especially if it's mainly at idle, and when warm, as that'll be your lowest point for oil pressure. Could be showing that oil passages / VCT solenoid are blocking.
    • WARLORD
      injectors top feed for sale

      By WARLORD · Posted

      Deatschwerks 1800cc sold
    • GTSBoy
      Ticking Sound On Idle - Rb25

      By GTSBoy · Posted

      Well, hydraulic lifters will get noisy if they are dirty/fouled in some way, and exactly how that manifests will depend on exactly what schmutz is where. There is a procedure on here somewhere for dismantling and soaking/cleaning them. Replacing them with new is about 50% of the work and about 5% of the money!
    • myrbgivesmeheadaches
      Ticking Sound On Idle - Rb25

      By myrbgivesmeheadaches · Posted

      Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
    • GTSBoy
      Ticking Sound On Idle - Rb25

      By GTSBoy · Posted

      This seems problematic and unlikely at the same time. Vanilla RB2Xs have hydraulic lifters. They do have "zero" clearance, but only when running with oil pressure inside them. When not running, you should be able to compress them and obtain heaps of clearance. RB26s and Neos have solid lifters. They should have ~0.3mm and ~0.5mm on the inlet and exhaust respectively. If they have zero clearance then bad things are happening. With nothing else being wrong, it would mean that the valves would be held slightly (ever so slightly) open when they are supposed to be closed and it should have all sorts of problems when running, caused by leakage in/out through the valves. Or, zero clearance can indicate severe valve seat recession. None of it is good. Have you used a piece of hose as a stethoscope to try to localise the noise?  
×
×
  • Create New...