Jump to content
SAU Community

What Non-genuine Windscreen & Windows Rubbers Fit My R32? Preparing To Paint My Car.


Recommended Posts

Gday,

Im preparing to strip my R32 gtst back to a shell so that i can have it resprayed. Im going to do all the prep work, and then tow it over to a spray painters to finnish it off.

My question is; Does anyone know what non genuine rubbers are able to be substituted for the factory R32 front and rear windscreen rubbers? Ive heard that some commodore rubbers will fit and im not prepared to pay $520 each for genuine Nissan ones! Also, ill pull the rear quarter windows out as well, so ill either have to remove the rubbers undamaged, or source some new ones. Does anyone know where i can get some of these as well (non genuine or cheap Nissan?).

Thanks,

Shaun.

the windscreen people will know... just take the rubber to them.?

what colour are you goin with the car?

When I repainted my R33 I had to get a new windscreen as well

The windscreen company used a mould similar to a my VX commadore and replaced the rear aswell

Cost about $30 for each.

When I repainted my R33 I had to get a new windscreen as well

The windscreen company used a mould similar to a my VX commadore and replaced the rear aswell

Cost about $30 for each.

Do they look the same though or does it look a bit weird...like they are not the right ones.

I am in the same position and will definately do this if they come up allright.

Cheers

Do they look the same though or does it look a bit weird...like they are not the right ones.

I am in the same position and will definately do this if they come up allright.

Cheers

Best thing is to drop into a windscreen shop and see what they have

Most the strips just come on a roll and cost about $5/m

Much better than $600-700 for new ones, by the time you buy the inner and outer

Attached is a pic of my old R33

You can zoom in on the front screen to what they look like

They do look different, but not out of place.

Only thing wrong with them, after about 18-24 months of being in the sun, they were showing some signs of sun damage. But at roughly$30-40 you could replace them.

post-14923-1164316318.jpg

Rear quarter window outer is bonded to the glass, buy new seal - comes with free glass attached.

Can't help with front or rear though.

Thanks mate. I sent you a PM if thats ok.

Shaun.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just buy a BMW if you want that... You can then choose whatever engine of theirs you want 😛
    • Clear vinyl wrap or clear coat? 
    • There really needs to be an ODBII item that can play intake noise through speakers, synchronized with your current RPM and TPS%.
    • Worth most of the $50k alone!
    • So, we now have a straight and clean boot lid inbound and the car goes in for paint, again, on Wednesday, and will be ready on Friday, all ready to get cams and stuff on Monday  And by straight and clean.....I mean a brand new OEM one that cost..... $1300....😪 Sadly there's no clean undamaged used soft top version available, plenty for the power retractable hard top versions though, which is arse and makes Mark have the sads I could have waited longer, until a NC sort top boot lid eventually turned up, but I'm sick of waiting and said fark it and made it rain cash, meh In other naturally aspirated news, one of the guys at work brought in his old Corola which had a 4AGE in it, really nice clean car with lots of mods, including ITB's, man that things induction noise sounds sick with all of the dorts that makes you smile......maybe the NC needs ITB's, yeah, basically for the noise they make, but they're pretty expensive, but, they sound so damn good I may bring this up when I drop the car up on Monday, and by may, I mean I will🤣🤑🤪🤣
×
×
  • Create New...