Jump to content
SAU Community

Recommended Posts

I use motul, seems lots of import users use that, ppl say its better then shell helix, bloody expensive though but worth it for ur baby :P fully synthetic of course. i think the rating is 5w40 or sumthin. so it starts easy and remains the same throughout the rev range. its doin well cos i was on the track yesterday doin laps and the only thing that overheated in my car was the CAT, i think i destroyed the stuff inside it which means POLLUTION (oh well) :P

Clint-O

Motul 8100 Synth - $55 from Autobarn (UAS wanted 65)

NGK Iridium Sparks - $13.50 each

Ryco Fuel Filter

Ryco Oil Filter - $9

Nulon Radiator Fluid *Make sure you definately check your coolant levels*

My car seems to run better milage with the ryco filter, and the oil holds better, prolly due to oil quality, UAS said the genuine nissan oil filters are better and arnt that much more expensive ~$13

Try and get a 100% synth oil no matter what, they warm up quicker and can move more freely around the vital areas.

  • 4 months later...

back from the dead...

so we've established that a fully synthetic oil should be used, but what weight/thickness should be used? i believe it should be heavier/thicker than the oil in a RB25DET, which people on this forum generally agree should be 5w40, but i can't find any info on the RB25DE.

i've just done my first 5000kms so i need to change pretty soon.

has anyone got a workshop manual that states what oil nissan recommends?

Cheers,

Greg

Guest RedLineGTR

5w-40w

the 5w is the thickness of when the car is cold and starts up..so having a thick old for startup dosent really help at all to lubricate the engine when its cold and causes more wear on startup from cold. the 40w rating is the highest temp or how thin it can get and the high temps.

The only oils i would consider is 5w-40w maybe 5w-50w...10-40w and maybe 5w-30w also...nissan dealers have the original oil which is 7.5-30w which has a nice gtr logo on it.

thanks for explaining it all, i had a vague kind of idea that the numbers were idicating viscosity but didnt really know what that meant :D

the mobil site recommended Mobil 1 5W-50 for an RB30 (they didn't have RB25) and that sounds about right from what you and others have said. i'll look into the motul because a lot of people seem to be using it. me being a tightarse, it will probably come down to price when deciding between mobil1 and motul. anyway thanks for your help.

cheers

greg

ive just put shell helix ultra 5w-40, ive made out in the maual that they reccomend 7w-40, sumthing not very common in auto shops here! im thinking of putting 10w 40 in next time just to see if there are any differences. i thinking opf using mobil R next time round, its what they use in dads M3

Originally posted by Greg

hi all,  

I'm about to do my first oil change since compliance and since i don't have an owner's manual i was wondering if someone out there would be kind enough to post up what type of oil i should be using (ie weight etc). Is it the same as the RB25DET?  

Thanks,

Greg

Where can you get the owner's manual from anyway? I really need one of these ey.

Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update: I got the magnet out. I bought 3 different flexible magnetic reach tools, but none of them worked. The magnet on the tip was all less than 2lbs of force, so i had to buy a special cylindrical magnet that had a pull force of 9lbs.  The magnet finally came in the mail yesterday, so i got under the car to get to work. The super strong magnet isn't that long, so i only have about 1 finger pinch lengths to hold it. I was so scared when i was going in the hole, that the 9lb magnet would just fly away inside the oil pan never to be seen again, but i had my butt cheeks clenched and finger gripped on that thing so tight, i managed to get it to suck the other magnet out.  It was a victory for me last night.         
    • Yep, pretty much what you said is a good summary. The aftermarket thing just attached to the rim, then has two lines out to valve stems, one to inner wheel, one to outer wheel. Some of the systems even start to air up as you head towards highway speed. IE, you're in the logging tracks, then as speeds increase it knows you're on tarmac and airs up so the driver doesn't even have to remember. I bet the ones that need driver intervention to air up end up seeing a lot more tyre wear from "forest pressures" in use on the highway!
    • Yes, but you need to do these type certifications for tuning parts. That is the absurd part here. Meaning tuning parts are very costly (generally speaking) as well as the technical test documentation for say a turbo swap with more power. It just makes modifying everything crazy expensive and complicated. That bracket has been lost in translation many years ago I assume, it was not there.
    • Hahaha, yeah.... not what you'd call a tamper-proof design.... but yes, with the truck setup, the lines are always connected, but typically they sit just inside the plane of the rear metal mudguards, so if you clear the guards you clear the lines as well. Not rogue 4WD tracks with tree branches and bushes everywhere, ready to hook-up an air hose. You can do it externally like a mod, but dedicated setups air-pressurize the undriven hubs, and on driven axles you can do the same thing, or pressurize the axles (lots of designs out there for this idea)... https://www.trtaustralia.com.au/traction-air-cti-system/  for example.... ..the trouble I've got here... wrt the bimmer ad... is the last bit...they don't want to show it spinning, do they.... give all the illusion that things are moving...but no...and what the hell tyre profile is that?...25??? ...far kernel, rims would be dead inside 10klms on most roads around here.... 😃
    • You're just describing how type certification works. Personally I would be shocked to discover that catalytic converter is not in the stock mounting position. Is there a bracket on the transfer case holding the catalytic converter and front pipe together? If so, it should be in stock position. 
×
×
  • Create New...