Hella Flush Posted November 19, 2006 Share Posted November 19, 2006 herro im not one for racing but could not resist seeing what the new rb20de cef does compared to what im used to with my old rb20det one... bad idea owned by a mildly modded rb20det r31 which even worse had custom plates with the owners name... this cannot happen and i appologise to all cef dawg owners... engine out of the blue one is gonna go into the black one next weekend ive decided and ill sell the blue one with rb20de... my question... loom swap... i wanna put 32 loom in as its a 32 20 with half cut a31 half cut r32 loom bits in it... just want a fresh hassle free full 32 loom to go in... straight forward rip out and put in? use 32 comp and everything... im assuming so but thought i would ask! told the mrs tonite - next weekend is dedicated cef weekend engine out of the blue one and tidy blue one up black one gets the pink bits cradle with 32 5stud hubs, r33 twin pots and kaaz 2way + solid cradle spacers and gtr sway bar then weekend after - turbo engine can go in Link to comment https://www.sau.com.au/forums/topic/143917-a31r32-loom-swap-qs/ Share on other sites More sharing options...
Dan_J Posted November 20, 2006 Share Posted November 20, 2006 well i thought u cud use da r32 loom.... but den i was told their deferent sum how... Link to comment https://www.sau.com.au/forums/topic/143917-a31r32-loom-swap-qs/#findComment-2689000 Share on other sites More sharing options...
huddy Posted November 21, 2006 Share Posted November 21, 2006 ADZ, if changing looms, you may need to change everything else to suit. i know that cefiro has 'square' style connectors (eg z32 afm fits straight in with same pinouts!) and 32 has round ones.... this may be a problem with all your other connections for water temp sender etc... i know coilpacks are ok, and inj are ok, but at the other end where they go into ignitor pack are no good. so unless you have got all the bits, i wouldnt bother. On another note i've had 2 different 32 remaps working in my car before, they were just not a suitable map (one was kelly's and other was a donnon one). Link to comment https://www.sau.com.au/forums/topic/143917-a31r32-loom-swap-qs/#findComment-2689801 Share on other sites More sharing options...
Hella Flush Posted November 21, 2006 Author Share Posted November 21, 2006 yeah way i see it huddymonster i have an r32 rb20det... so if i use full r32 rb20det engine harness all wires should be fine... my only problem would be connecting to the chassis loom (dash cluster etc) which may require few wires to be cut? agreed? Link to comment https://www.sau.com.au/forums/topic/143917-a31r32-loom-swap-qs/#findComment-2690358 Share on other sites More sharing options...
robots Posted November 21, 2006 Share Posted November 21, 2006 I'm also interested in your case, Hella Flush. ( have a r32 front-cut and a cefy). What would be the easiest way of getting everything work ? Thanks ! Link to comment https://www.sau.com.au/forums/topic/143917-a31r32-loom-swap-qs/#findComment-2691443 Share on other sites More sharing options...
kinggts25 Posted November 21, 2006 Share Posted November 21, 2006 i used a full r32 gtst loom in my cef....just spliced in a few wires under the dash and behind the passenger headlight Link to comment https://www.sau.com.au/forums/topic/143917-a31r32-loom-swap-qs/#findComment-2691952 Share on other sites More sharing options...
kinggts25 Posted November 21, 2006 Share Posted November 21, 2006 http://www.geocities.com/lowrider_c33/ there u go guys...thats the website i used...basically step by step to do mine along with some ecu pin out diagrams its easy as Link to comment https://www.sau.com.au/forums/topic/143917-a31r32-loom-swap-qs/#findComment-2691971 Share on other sites More sharing options...
daisu Posted November 21, 2006 Share Posted November 21, 2006 God damn I wish I knew that a few weeks ago, I just paid $350 to have my loom modified by an auto electrician Link to comment https://www.sau.com.au/forums/topic/143917-a31r32-loom-swap-qs/#findComment-2692317 Share on other sites More sharing options...
robots Posted November 22, 2006 Share Posted November 22, 2006 (edited) $350 aint that expensive. )) Some koom conversions are much more expensive )). Anyway what I wanted to ask is, if any of you guys know if the procedure will be similiar to this if the base car is rb24s ceffy (carb one). It doesn't have an ecu and fuel pump is retarded and bucn of other 19th centurey crap LOL. Edited November 22, 2006 by robots Link to comment https://www.sau.com.au/forums/topic/143917-a31r32-loom-swap-qs/#findComment-2694571 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now