Jump to content
SAU Community

Mega cruise success + Encore car cruise *EDIT* Pending authentication


Recommended Posts

Guest piston muncher

Thanks to all the people for turning out for the cruise departing from epping plaza. It was a night and I was pleased that 30 cars still came even though the melbccr cruise was on. Because it was such a good night there will be a encore. So make sure that you keep on the look out for the next cruise. I heard that there were people who missed the group of cars because we did leave on the dot. Looking forward to the next cruise.

Please provide further proof of who you are, perhaps some pics of this past "cruise". If not I will delete this thread, as I've had bad reports of the last one you supposedly organised.

You's lovingly,

Shan

VIC Forum Mod

I don't know who you are, or whether you are a 14yr. old kid talking 5h1t or an cop organising a sting (otherwise known as intrapment)

I came to this cruise that you have proclaimed as a success, and this is what i had to say to your last thread.

IF YA GOING TO ORGANIZE OR ADVERTISE A CRUISE YOU SHOULD F@RKEN GO TO IT!!!  

Get there at 9:30, did laps around Plaza for 20mins and saw no one.  

NOT A BLOODY GOOD START TO YOUR INVOLVEMENT IN THIS FORUM. YOU FR@RKEN W@NKER!!  

(Sorry INARK, but i am bloody pissed. This guy on his first post, promotes a "mega cruise" that didn't even eventuate. Waste of time, money, and agood night)

and these are the times you posted!

Meet at 9:30pm behind Epping Plaza (Northern Suburbs)....depart at 10:00pm.

I was there at exactly 9:33pm and left the plaza (mega pissed) at 9:56pm (and have 2 mates to back my statement!)

This is what other reliable/trustworthy members saw at the plaza as they drove past.

and did you see all the friggin police there last nite? my gf & i cruised thru there last nite at about 10:30-11pm (not to go to the cruise though, just a bit of a drive) and i swear there was a radar gun every 200m along the road and about 3 or 4 other police cars just circling around the epping plaza area! a bit of a setup i reckon.

These forums are for enthusiusts who enjoy meeting up with other ppl. and cruising to different places in a law abiding manner!! We do not need someone like yourself to spool our night, in whatever way.

I URGE ALL MEMBERS TO IGNORE THIS MEMBER AND ANY NEW MEMBERS ORGANIZING A CRUISE!

I have learnt my lesson!

Alan C.

yeah i mean i didnt see anything at the plaza really, and i leave gf's house and pass the plaza around 9:30 each night, i'll check out autobarn on friday see whats happening... not a good start at all laddy

IGNORE THIS CRUISE!

I went to his last organized cruise and no-one was there. Only 4 police cars and a few radar guns around the epping plaza!

refer to these threads:

1/Responses to his first cruise post.

2/His claimed successful cruise

YOU HAVE BEEN WARNED!!

Alan C.

lmao it has to be a cop.... what other organisation is so unorganised that they turn up to their own sting almost an hour late

HAHAHAHAHA

u cops need to focus on busting real criminals rather than preying on those who arent looking for trouble.

go bug MCCR and all the hoon/wankers that hang out there

thread closed.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Hey everyone, I recently bought myself a 2001 Nissan Stegea M35, and I've had a few issues that I had to fix, my car would start intermittently and I had a bad rocker cover leak, after a couple days of looking I finally found a part number that interchanges with the OEM starter as the OEM starters at $1300 and I can't afford that, this starter was only $270 and I replaced the start and still had the same issues, I posted a video asking for help online and it went very well, some guy said it was probably a bad ignition switch so I took my dash apart and turns out my ignition switch was half screwed in and was loose, once it was tightened it fired right up, I found a local place called "Boost factory" and they sold me a part of OEM Nissan rocker covers, they were $600 which was a shocker but I couldn't find them anywhere else, so I installed them and fixed my oil leak as the old rocker cover was cracked and warped, I now need to replace my boost air inlet hoses as they have some cracks.
    • I am being real ocd and do not want to make amy mistakes so appreciate all help provided. I am overly cautious so asking for opinion even if i know the answer   few questions,   1.re tensioner, should spring be greased lightly?    2.tensioner has two washers , one pressure washer and other has recessed/ seat. I am going to put the recessed one facing tensioner where edges are cut out and pressure washer on top   3. my car has custom triger kit sold few years ago by guy who initially built the engine. I moved the crank gear and it moved in and out easy, only way to remove belt is to slide the crankshaft gear forward which I did. I have seen these being very tough to move , anything to do with my woodruff key?   it has a crank sensor shown in purple which I assume reads from the 12 teeth position mounted to the crankcase gear   4. timing belt doesn’t have arrow stating front or back just a arrow which I think is direction of rotation . Do you agree?   5.i figured out why my crankcase cover was worn as there was no washer installed over the crankcase cover before the harmonic balancer was put in place. It is missing, anyone knows the part number? It looks like this https://justjap.com/products/genuine-nissan-crankshaft-timing-gear-rear-plate-washer-nissan-s13-ca18-a31-r32-rb20-r33-r34-c33-c34-c35-rb25?currency=USD   https://tinypic.host/image/IMG-4535.382Zy2 https://tinypic.host/image/IMG-4537.382dSz https://tinypic.host/image/IMG-4534.382q4U  
    • CTIS (Central Tire Inflation System) has existed since the 80's. I'm looking into buying a Hummer H1 and they generally included it. 
    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
×
×
  • Create New...