Jump to content
SAU Community

Recommended Posts

hi guys

anyone know if there is an aftermaket plenum to suit an r34gtt? im after one with a front facing throttle body.?

why dont the ones for r33 fit r34neo engines? is it only because of the fuel rail? what other mods would need to be done if any?

thanks

Justin

Link to comment
https://www.sau.com.au/forums/topic/144004-aftermarket-plenum-to-suit-r34/
Share on other sites

They don't bolt up to the head. Completely different.

I have heard of an R33 one fitting with some new holes drilled into the head and some on the plenum but haven't seen it.

You could get a custom one for the top half only made up fairly easily.

There has been talk of a couple being available soon but soon just keeps stretching out into infinity.

They don't bolt up to the head. Completely different.

I have heard of an R33 one fitting with some new holes drilled into the head and some on the plenum but haven't seen it.

You could get a custom one for the top half only made up fairly easily.

There has been talk of a couple being available soon but soon just keeps stretching out into infinity.

Are you 100% sure, i havnt tried it, but only as i havnt had the parts at the same time, i am pretty sure they are the same bolt pattern, The injectors and fuel fail mounts are different.

They don't bolt up to the head. Completely different.

I have heard of an R33 one fitting with some new holes drilled into the head and some on the plenum but haven't seen it.

You could get a custom one for the top half only made up fairly easily.

There has been talk of a couple being available soon but soon just keeps stretching out into infinity.

OK now the greddy r33 plenum does fit the r34.. lets put that to bed now i have one on my car and no problems..

hey guys

1

im not saying anyone is wrong or wright here, (as i have no proof and havent tried this yet) but i find it hard to beleave nissan would change the bolt pattern on r34 to be differrent from r33, so can anyone 100% confirm the pattern is different or is it just what ppl have been told?

2

is the top half of the plenum the same pattern as r33?

3

IF IF IF the patterns are the same, all that would need to be changed are the fuel rail+injectors?

4

Mario, More info please!!!!!!! i know it sounds like a stupid question but are you 100% sure your engine is a Neo? if it is we know a greddy plenum will fit! please give us more info and photos.....i want a greddy plenum soooo bad so i can tidy up my engine bay.

so can anyone give a 100%confirmed answer for the top 2 answers?

thanks

Justin

theres a guy on the forum user name: 600hp who makes custom plenums for R34 GTT. very good quality and price, flow more/better than most jap name brands I was told. just send him a pm. cheers

Edited by Forged
you could always cough up the money for a RIPS plenum...but the greddy one does fit, you'll have to use the r33 iac and fuel rails iirc.

so the patern is the same and the greddy plenum will fit yaaaaa...

i hate to sound dumb or ignorant,(but i am a simple deisel mechanic) can someone post up a pics of the r33 IAC (idle air control valve) and an r34 one?

what about the traction control throttle body?

i would like to set up a Q45 throttle body is it easy to set up? eg electrical plug, how to set up tps?

thanks

Justin

Edited by walkoau
This 600HP plenum; does it retain all the R34 bits like fuel rail and injectors? Got a photo?

i believe itis compatible with the factory fuel system, with larger throttle body too. best to pm the guy.

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • In a few years from now, you'll regret that. It'll eat away at you, knowing the truth of the ugly hiding beneath the beautiful exterior... 😛
    • I don't think the G2 profile is particularly dangerous for the engine per se, more just are you actually ok with the turbo lag trade-offs? If the answer is yes then go for it. I personally don't think I'd be ok with it because I spend so much time at lower RPMs and I really enjoy the feeling of being able to stay in 5th gear on the highway and just roll into the throttle to get boost. Or staying in 3rd gear on "gentle canyon cruises" without feeling the turbo lag too badly. The 525 pump should be able to run flat out on factory lines but I would bet the pressure drop from pump to regulator is quite impressive. I don't know how much it would be exactly but I've seen figures like 30 psi thrown around.
    • It's interesting seeing everyone talk about what level of risk they are happy to tolerate.  Building a GTR always has a level of risk, you could be that lucky guy that drops 20k on the engine build alone and still has the thing go pop on the dyno. Life is fun like that.  The way I see it, the thing is a toy to be enjoyed. I'd be happy to turn up the power on stock motor and limit the risk with sensible tuning and engine protection. If it still goes pop, it is what it is. The car isn't a daily driver so it can happily sit while a plan is made to sort it out.  Given this thing will be a street car only, I really feel it's worth the (relatively small if managed well) risk to turn the power up to around 350KW on e85.  I don't think anyone getting into the skyline game now is doing it out of logic. Surely it is a purely emotional decision so I'm not sure how important it is to think about the engine build logically. The heart wants what it wants.  @joshuaho96 little note for Josh, I run my 525 pump flat out all the time and through the factory lines without any issues. (excluding the melting connectors, that's sorted now. we'll pretend it never happened lol)
    • But the Nexus S3 is very expensive and won't be as purpose-built for the application as a separate electronic boost controller :^) More seriously my pet issue here would be that the Walbro 525 running at 100% duty cycle is going to require more FPR than the stock setup can handle. I'm also pretty sure from what I've seen elsewhere you might want to slow down the pump regardless unless you're going to come up with some way of upsizing the fuel lines coming from the fuel tank. Factory 8mm fuel line doesn't actually flow very much if you want to keep pressure drop down between the fuel pump outlet and FPR. If you really want to "keep it simple" I would run only as much pump as you need and source a fuel pump controller to slow down the pump in the vain hope of being able to run stock-style FPRs which are pretty dinky. Or just use the HICAS lines and it should be mostly fine. OP should also really think hard about what profile they'd want out of the turbo. My pet choice here would be the G1 profile rather than anything higher power but YMMV. I already think ~stock turbo lag is pretty bad so I don't want to make it worse. In "gentle canyon cruising" I found that I spent a lot of time around 4-4.5k RPM. I also recommend DIYing labor if you're detail-oriented enough. Costs are high for labor + if you do it yourself you can be your own quality control.
    • GTSBoy is again on the money. My actual advice? Sell the car. (really). For what it's worth as is, you can sidegrade into something much better. If you care about function then this is the actual move. If you want a Skyline to perform, set aside about $100K to do it. This is NOT a typo. You will see right away these are two very different mindsets. Realistically we're talking full restomod for any Skyline still kicking around. Have an honest think about which one you are.. and what you want to do, and how much you want to invest in this (with no return).
×
×
  • Create New...