Jump to content
SAU Community

Recommended Posts

As topic states.

Engine currently in need of rebuild as #6 cylinder has no comp (56, compared to 147-152 in all others). Have owned the car for 2 years, has done a total of just under 10,000ks while in my ownership. Engine had (standard) rebuild by RACEPACE approx 10k before i purchased car. All recent work done by PROTEK Automotive.

***CAN ORGANISE ENGINE REBUILD FOR OWNER IF REQUIRED***

1992 GTR Skyline

Marone in colour

90,382 kms

Aftermarket 320km Dash

Bilstien Suspension (Quite hard for street driving)

3" kakimoto exhaust

Racepace "racecat"

HKS Adjustable cam gers

Oil Catch can

Apexi RX6 twin high mount turbo kit. Polished compressor covers and cooler pipes. External wastegate and screamer pipe.

Turbo specs (unsure of a/r sizes)- Compressor wheel - inducer 53mm, exducer 78mm. Exhaust wheel - 57mm.

Apexi filters

Custom power steering can (made so turbo's and induction pipes could fit)

Greedy boost and A/F meter gauge

Nismo twin plate clutch

and was told by previous owner that car has strengthened 1st, 2nd and 3rd gearsets.

New battery and front brake (competition) pads.

Interior in excellent condition, has just 1 small burn mark on right side of rear seat. all trim, dash perfect. Paint/rubbers also in very good condition - no rust.

Car ran 12.027 @ 112.33mph with previous set up (car was tuned at 235rwkw). Didn't get a chance to time with current set-up and unsure of power before engine went poop.

***Car currently has Autronic SM4 computer and a set of Volk 19" wheels, which will not be sold with car, unless some kind of agreement can be made. Will sell with Tomei chipped ECU and a set of 17" Volk C-ULTRA's***

If sold without Autronic will include airflow meters blah blah so car can run with standard computer. Also will include standard turbo set up (1 turbo no exhaust wheel).

NOW - $14000 ono

Please PM for enquiries.

Cheers,

Mick

th_GTRfront.jpg th_Passengerbside.jpg th_Engine.jpg th_Volks17.jpg th_GTRside.jpg th_48f2f975.jpg

Also have

Tomei 260' poncams

Sard 700cc injectors

Sard Fuel Rail and Nismo off rail fuel reg

HKS Remote filter and oil cooler

Apexi AVCR

Greedy Black faced gauges - oil pressure/temp and water temp.

Edited by OBES
Link to comment
https://www.sau.com.au/forums/topic/144661-r32-gtr-victoria-14000-ono/
Share on other sites

Are these included with the car?

Tomei 260' poncams

Sard 700cc injectors

Sard Fuel Rail and Nismo off rail fuel reg

HKS Remote filter and oil cooler

Apexi AVCR

Greedy Black faced gauges - oil pressure/temp and water temp.

Why did you go with the Apexi turbo's?

What has been done to the engine internally? (headwork, forgies)

Edited by dontfeelcold

Got a guy coming to look at it Wednesday actually.

Wheels were on car when it was purchased. Previous owner told me he got them from Jap, unsure of original purchase price but i dare say they weren't cheap. If it does sell, i'll let you know and we can see if we can work out a deal.

Cheers,

Mick.

SOLD - pending final payment.

Offers (sensible) invited on

Tomei 260' poncams

Sard 700cc injectors

Sard Fuel Rail and Nismo off rail fuel reg

HKS Remote filter and oil cooler

Apexi AVCR

Greedy Black faced gauges - oil pressure/temp and water temp.

Autronic SM4 computer

set of Volk 19" wheels

  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Apologies to all about the delays in getting back to people.

Write off - pm replied

Rowdyr32 - pm replied

123456 - sorry, not interested.

Stretch - send mob again as i lost it and i'll call as soon as i receive it.

Thanks,

Mick.

P.s Parts For Sale

Tomei Poncams 260' - $800

HKS oil cooler and relocator - $450

Sard 700cc inj - $600

Sard rail - $300

Nismo reg - $200

Apexi SAFC - $450

Autronic SM4 - $1500 (inc. crank angle sensor disk, etc)

Greddy Gauges (black) Oil temp, oil pressure and water temp - $100 each

  • 6 months later...
Apologies to all about the delays in getting back to people.

Write off - pm replied

Rowdyr32 - pm replied

123456 - sorry, not interested.

Stretch - send mob again as i lost it and i'll call as soon as i receive it.

Thanks,

Mick.

P.s Parts For Sale

Tomei Poncams 260' - $800

HKS oil cooler and relocator - $450

Sard 700cc inj - $600

Sard rail - $300

Nismo reg - $200

Apexi SAFC - $450

Autronic SM4 - $1500 (inc. crank angle sensor disk, etc)

Greddy Gauges (black) Oil temp, oil pressure and water temp - $100 each

autronic sm4 still avaiable? can i have the details for all the sensors , hardness plus whatever is included? thanks.

PM me.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Aren't these run off of high voltage in OEM applications? Like 200+V. Or at least 48V in mild hybrids. At ~18,000 BTU ballpark nominal capacity the power draw is at what, 2.2 kW? ~185A is a pretty crazy amount of amps. At 200V it's only 11A. The 70A nominal kits with up to 100A peak draw I see for stuff like classic Porsches have pretty substantial compromises like shutting off at idle and not actually managing to keep the interior cool in hot conditions because they can only output like 6000 BTU. IMO if I had to pick what high amp draw component to retrofit to these cars I would start with the engine fan, not the AC compressor. You need an ~850-1000W brushless fan, something like this: I would love to see the data but I would bet that whatever you save by running the AC compressor in a more efficient regime with an electric motor you're probably losing to conversion losses anyways. It's not really like a clutch fan where you're losing power all the time even when it's nominally disengaged and it gets worse as it engages because the envelope tracking isn't that precise.
    • I am a volunteer marshal at the Grand Prix. As such, I get a "friend / family" ticket. It is a general admission ticket, valid for all 4 days. Anyone interested in my spare pass, please DM me. Ticket is "free, gratis and no expense".
    • agreed, the price vs gains it’s there.   unless you go china supercharger. Temu racing anyone?😂https://www.facebook.com/share/15nkfpsg7Z/?mibextid=wwXIfr that was one of the ones that popped up on my feed 😂
    • Bit of a long shot but if anyone has 4 of these laying around in new or near new condition. I will happily buy them off you.     https://skylinespares.com.au/product/stabilizer-door-glass-inner-new-8032404u03/?srsltid=AfmBOop6L5EgUFaHPHiVXoAhv5k8aJYwc77nGmoApp-hY03OiOsNVaOv Thanks 
    • I'm wondering is the Toyota and Mazda "collaboration" could see that new Toyota ???G20 ??? turbo engine that they have been showing off recently into a future MX5, apparently it's good for 400hp out of the box That could easily, possibly, be much better than the last collaboration between Toyota and Subaru with the boxer engine in the twins
×
×
  • Create New...