Jump to content
SAU Community

Recommended Posts

G'Day guys,

I am about to get the 100k service on my 1990 R32 GTR done. It is going to be done by Ferntree Gully Nissan (Melb). I am pretty much supplying all parts, they are just doing the labour (mianly bcoz I have no time with work atm).

The parts I have currently:

-Gates timing belt

-Gates radiator hose kit (top and bottom)

-Genuine Nissan Water Pump

-Genuine Nissan Thermostat

-Genuine Nissan Fuel Filter

-Genuine Nissan Cam Seals

-Genuine Nissan Crank Seals

-Idler Pulley

-Tensioner assembly

-Drive belts

-NGK spark plugs

-Oil Filter

-Motul Turbolight 4100 oil

-Castor rod bushes (my current ones need replacing)

Basically all the Nissan dealership is doing is putting in all these parts, along with a 100k service checklist and they are only supplying the coolant.

Anything that I have missed guys? Trying to get as much done at the same time as I can. Thanks for your help.

Cheers,

Dan :rofl:

Link to comment
https://www.sau.com.au/forums/topic/144692-r32-gtr-100k-service/
Share on other sites

Ali - prices from memory (some I get trade - PM me if I can help you out with part numbers or getting something 4 u) :mellow:

-Gates timing belt - $80

-Gates radiator hose kit (top and bottom) - $55 (trade)

-Genuine Nissan Water Pump - $75 (trade)

-Genuine Nissan Thermostat - $40 (trade)

-Genuine Nissan Fuel Filter - $25 (trade)

-Genuine Nissan Cam Seals - $30 (trade)

-Genuine Nissan Crank Seals - $20 (trade)

-Idler Pulley - $50

-Tensioner assembly - $50

-Drive belts - $50 (for all 3)

-NGK spark plugs - $160

-Oil Filter - $8

-Motul Turbolight 4100 oil - $45

-Castor rod bushes (my current ones need replacing) - $125

As I said mate, only a rough price on most of them - cant remember 100%. PM me if I can help you out.

PS - Where in Vi are you? Not in NE suburbs by any chance?

Cheers,

Dan :O

There is no bearings for the cams :( Just bolted in with caps... I wouldnt bother replacing cam gear bolts either personally...However it is a good idea to replace the idler and tensioner studs, can be known to break.

Dont bother with a genuine fuel filter you can get a repco filter for about 10 bucks.

Are the rad hoses crunchy or bloated? If not dont waste the money, you can do it later when they need doing. Dont forget to check your heater hoses including heat exhanger ones too.

Edited by Godzilla32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • H2 (for cars) will never happen. It's not reasonable for any number of reasons. It's also not reasonable for almost all of the industrial uses that the fanbois say that it will be used for, again for a large number of reasons. There are some cases where it will be good. But, even those will be massively hampered by the economics. The only way that H2 can be economic is if we somehow manage to get from where we are to the other side of the economic-valley-of-death in which no-one can operate. You need there to be sufficient renewable generated electricity to be available so that it is effectively free. Once you are there, you can do whatever the hell you want and hang the efficiency. But until you get there, the ever diminishing value of electricity makes it harder and harder to encourage businesses to build the new generation capacity, and they will simply stop investing in generation projects. (I kinda think there needs to be just government money spent on building the required capacity in a non-commercial way, similar to how the first fossil fueled grids were built, as national-government owned utilities. And probably some nuclear in there to start. But this all should have started 10-15 years ago to avoid the chasm of death that we face right now). Synth fuels will be much more likely, but will only occur is there is at least some renewable H2 production, because you need H2 to do it. And you need stacks of free (or at least extraordinarily cheap) energy because assembling molecules back into fuels is exactly the opposite process to burning the fuel, and the reason we burn fuels is because there is so much energy squeezed into each molecule. So you're somewhat subject to the same economic valley of death problem as above anyway. That is unless people are willing to pay the current equivalent of $5 or $6 per litre of petrol-ish liquid fuels. Can you imagine it? The squealing at $2 now is bad enough.
    • This is so cool. Get a dashcam that records audio and hopefully you'll catch it.  Maybe there's a brand or some kind of markings on the back ? Are the pics hand drawn? I love it so much.
    • Hahaha yep, point(s) taken. I just like seeing different things and an EV in an R32 is pretty different. I'm not on the EV band wagon, I'm waiting for synthetic fuels or hydrogen personally. 
    • I mean it's probably likely that people overestimate their skills in dialling in a setup and noticing the changes. I had SK shocks and springs, and added heavier springs and got them revalved by Sydney Shocks to suit based upon what I told them I wanted the car to handle like. I got back a completely different feeling set of shocks, which probably (?) feel great on track but holy hell are they rough on tram tracks and the like. The shock dyno actually looks pretty similar to Shockworks (from what I can surmise from a screenshot of a youtube video - and my dyno printout...) Truth be told I doubt I'd be any faster or slower with either setup, or camber/castor combination. I also had whiteline eccentric castor bushes up front of my R34. I removed them and put in poly non-adjustable ones to soothe my OCD (nobody ever set the castor the same side to side, and it'd be near impossible to do) and be happy the wheel is centered in the well now for clearance reasons. Yes I wanted it to move 1mm 'back' :p I've effectively set my castor back to stock, negating all the benefits of that which is supposedly massive. I've probably also altered toe and camber in a negative (detrimental) way. I can't tell any difference steering the car.
×
×
  • Create New...