Jump to content
SAU Community

Recommended Posts

I used a lpg gas solenoid to cut off the air flow to the wastegate and it works good you can change from std boost to hi from a switch in the drivers seat. I have not tried changing it from hi to low under full load.

(look at the attachment)

post-28604-1164448540.gif

Edited by RB SANDY

I found that the car makes more low end power on std boost (std ecu) the car has a rb25 with a r33 s1 ecu.

also did you try chinging it at W.O.T

Edited by RB SANDY
I found that the car makes more low end power on std boost (std ecu) the car has a rb25 with a r33 s1 ecu.

also did you try chinging it at W.O.T

Mine was fine changing it at wot.

Regarding the more low end power.. The reason it probably feels that way is because the boost doesn't snap on as hard giving it an increased laggier feeling.

Other than that.. unless its leaning out in the low end it won't be making less low end power.

It really is silly pushing boost up unless you know for certain you have dropped a 'new' fuel pump in it. My std fuel pump died at ~160rwkw.

If its feeling gutless in the low end on high boost throw it on the dyno and see whats up with it.

because my car has a rb25 in it I changed the fuel pump to a r33 one that had done 70,000k on it so i dont think its that it would be r&r mode the hi boost is at 11.5 psi but its not all that bad.

67,000km's and my pump couldn't hold more than 160rwkw.

It was a genuine 67,000km's, the car was like bran spanking new.

This was 5years ago. So that would have made the car ~9years old.

So similar now to using a fuel pump from a 1997 R33. :D

Have the afr's checked with a cheap $30 power run.

  • 2 weeks later...

i did the dual stage hack in my r33 then got a real boost controller

theres a big thread in the tutorial on the r33 dual stage hack

why not just run the highest boost you can all the time?

thats why i moved to a real controlller, just didnt see the need for a dual stage system. but good on u for trying something and writing it up

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can you log IAT? Whilst WTA coolers have their place, doing any sort of sustained run is not one of them There are fixes that slow down the heat soak, like ice boxes, which don't last that long, and interchillers, which are fairly expensive, up grades to the WTA cooling radiator, which may require a bigger pump, and upgrades to the reservoir size,  and upgrades to the cooling fans, but, it all still heat soaks, and takes ages to come down in hot weather  For a turbo, that isn't locked into WTA like my PD blower is, can you not possibly swap to a nice air to air intercooler????, it would be better for sustained runs then, and have alot less things that could go wrong in my opinion 
    • So, the other thing I've sorted is a baseline dyno run up at Unigroup's new location. The auto trans was a little unco-operative by both shifting down when the throttle was floored on the dyno (so Mark had to ramp it up more slowly than in a manual) and also by shifting up at 6,000 even in sports mode instead of the indicated redline of 7,000 Still, on a hot day it made 240rwkw at 16psi which seems about right for 300kw (400hp) through an auto at the wheels.  The shape of the curve is not quite right because it was not full throttle to about 4,500 to stop it kicking down, but until I can get a tune on the auto trans control this was the best we could do.....full boost will be well below 5,000 once that is sorted, I'll get some data logs when I can to confirm For comparison, the R32 made 255 at 12psi (at 4,500) on the same dyno with tune, n1 turbos, cam gears, big exhaust but otherwise all standard so the v37 is likely a little better out of the box. One thing that is very clear is that the standard water to air intercoolers are not up to sustained use at full throttle in warm ambient temps. After about 5 runs (so only a few minutes full throttle), it was pulling boost and timing and dropping 10-15% power. Unfortunately I didn't get that printout and the Unigroup guys are away at the moment, will try and get hold of it on their return. So, looks like a healthy engine to start modifying and the only real area of concern is the w2a heat exchangers which the aftermarket has plenty of solutions for    
    • I maintain it actually looked really nice in person. So much so that I thought "No, this is illegal" but there it was, clear as day. I think we can easily call the wing and wheels/height to be transformative. Not saying it's better than the GR Whatever, or the 86, or the WRX STI or anything of that sort (the internet says it all bolts up so you can buy best of all worlds?) but it's still at least a thing and not nearly AS bad as people say.
    • That's less offensive than the previous gen.....except for all that ugly black tupperware around the edges. Blerck!
    • I leant out the window recently and took a picture of this new WRX. It looked real damn fine in person. It's faster around a track (stock) than a (stock) GR Yaris. It's much more practical despite being heavier. It's significantly cheaper. This gen tunes really well, much better than others. .... I think they're probably a lot better than people expect.
×
×
  • Create New...