Jump to content
SAU Community

Recommended Posts

any one heard of one of these...

1995 R33 Nissan Skyline GTR 4 Door, Recaro leather front seats and matching rear retrim, 3 inch exhaust and ARC airbox are the only power mods, Quantum coilover and NISMO suspension, New tyres 255/40/17 on factory origninal 17x9s, New clutch and reco gearbox. Momo wheel tinted glass. It has all the usual R33 V-spec equipment 4 wheel drive and steer, Brembo anti-lock brakes.

its on eb%y not sure if im aloud to say that word..

post-21361-1164523303.jpg

Link to comment
https://www.sau.com.au/forums/topic/144840-wat-the/
Share on other sites

Sorry dudes, this car was advertised on here a few months back and it was built up from a GTS4 by some Australian guy (forget who). I did a bit of thread hunting but couldnt find the original.

Still a bloody nice car!!!

Link to comment
https://www.sau.com.au/forums/topic/144840-wat-the/#findComment-2704772
Share on other sites

Sorry dudes, this car was advertised on here a few months back and it was built up from a GTS4 by some Australian guy (forget who). I did a bit of thread hunting but couldnt find the original.

Still a bloody nice car!!!

was it the same one from HPI?????

Link to comment
https://www.sau.com.au/forums/topic/144840-wat-the/#findComment-2705059
Share on other sites

I purshased the original sales brochures for both 32 and 33 Autech sedans. There are no prince badges on either car, the 32 has a badge on the boot that simply reads Skyline 26.

And thats a RB26DE engine not RB26DETT

alphanumeric: If it's true, I wouldn't mind seeing information on this "Prince GT-B"

Link to comment
https://www.sau.com.au/forums/topic/144840-wat-the/#findComment-2708022
Share on other sites

And thats a RB26DE engine not RB26DETT

alphanumeric: If it's true, I wouldn't mind seeing information on this "Prince GT-B"

Ill see if Ican scan a pic up it was at a GTR festival or something. I saw the pic in a HPI mag a couple of years back.

Cheers

Chris

Link to comment
https://www.sau.com.au/forums/topic/144840-wat-the/#findComment-2709025
Share on other sites

The R32 GT-B was a one off, and normally resides in a warehouse along with a heap of other super-rare Nissans.

Autech did make the R32 Skyline26 which was auto and RB26DE, that came in an unusual one-off colour that is impossible to describe. Limited run of 400 units from memory.

Autech made the R33 GT-R sedan right at the end of R33 production, so they're all 1998 models with the Xenon headlights. They're very rare (same - 400 units I think) and fetch better than two-door money these days.

Link to comment
https://www.sau.com.au/forums/topic/144840-wat-the/#findComment-2710377
Share on other sites

And thats a RB26DE engine not RB26DETT

alphanumeric: If it's true, I wouldn't mind seeing information on this "Prince GT-B"

There is a 4 Door R32 GTR - "GT-B" its in a nissan museum in Japan. I used to know more but its been a long time since I've seen the pics.

I believe a few members of this forum have seen it - Demon Dave possibly.

Link to comment
https://www.sau.com.au/forums/topic/144840-wat-the/#findComment-2713049
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Well, your RB20 ECU loom won't have wires for the boost solenoid, that boost sensor, and possibly one or two other things. There could be differences in seemingly random things like the charcoal canister purge solenoid, because the 25DET has to handle boost in the vacuum system and the 20DE does not. I don't know - I haven't looked. It is very likely that all the most important things are same-same, being the main sensors like AFM, CAS, etc, and the injectors and ignition. Not that you'll need the AFM for the Haltech anyway. I would suggest that you would seriously want to sit down with the pinouts for both ECUs and just go through them and highlight green what is the same, orange what is different/missing, and make a plan from there. It's not going to be difficult. It will either be the same or need to be fixed.
    • yeaaa that's why I haven't done any wiring to the stock ecu harness because I have the haltech, but then that leads me to the other question of "is the pnp harness really plug and play?" or would I have to still switch some pins/wires over because the pnp is for the rb25det neo harness, and not for the rb20de neo harness. was really hoping to find something to spoon feed me since so many people have done rb20neo + t conversions, but man this is rough.
    • Temu raptor, lol. At least the owner isn't your typical ranger danger lot
    • They definately are coming back around, so many GTRs coming through again with them.
    • Besides which. If you have a Haltech waiting - don't waste your time and effort and money trying to get the boost sensor. Just f**k the stock ECU off and put the Haltech in. Then you won't need the boost sensor.
×
×
  • Create New...