Jump to content
SAU Community

Recommended Posts

jrocket, thats about as dirty as i have gotten mine, but mine was on a concrete skid pan, but it went for an accidental excursion off the skidpan through a big (about 8 inches deep) puddle of mud. it cracked my front bar, and i wasn't driving.

Yeah it took me hrs to clean all the car. Had to take all wheels off to clean inside of rims. All brakes had to be cleaned, sand washed off all the shockers. There was half the track sitting on top of my exhaust cannon. skirts all were full of sand adding to the weight of the car. Basically just put the car on stands and then got under there with the pressure cleaner to get all the shit off.

Note to self. Stay away from dirt roads and mud patches.

I don't usually let my car get too dirty, but one time I had to go away for work for a long duration and parked my car at my parents house for around 6 weeks. The problem was, I didn't cover it up, and I parked it too close to the lawn, and the lawn has automatic reticulation using ground water. My car was stained yellow/brown when I came home. And it wouldn't come off - it seems to eat into the outmost layer of paint and embed itself. Some cutting compound managed to remove some of it, but it was a slow process, and I was still busy with work, so it stayed like that for a few days, and by the end I wanted to sell it coz I didn't even want to look at it. I ended up paying a guy to come out and acid wash it. When he saw the car, he didn't say anything, he just frowned. It took him around 4 hours to clean (although he did do the interior too). Car looked fantastic again afterwards.

Ouch that would suck. I will keep that in mind as i am thinking of leaving my car at my mums place for a few months while i go away for work. I parked my car at my dads place once near a tree and the f'ing tree was dropping sap down. My car had like splatters of resin all over the car. That took some elbo grease to clean.

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have done smoke test and can’t see any leak on high or low side.   checked pump and fluid can flow through. Removed the high pressure from steering and did smoke test and same on low side, no leak.   puzzled. Thinking why if it was all ok it suddenly went as car was off road for a year. Don’t want to disassemble pump yet as i can see fluid / air( compressor) can flow through with no issues
    • Which manifold mate? Meanwhile......Mark is wondering how bonnet vents would look on the NC 🤣
    • Actually,  just remembered there should be info in the threads (somewhere) about swapping to a manual steering rack and deleting power steering all together. 
    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
×
×
  • Create New...