Jump to content
SAU Community

Rb20det Silvertop, Loom, Ecu, 5 Spd G/box With 2 Month Old Daiken 5 Puk Clutch, R200 Lsd Package For Sale.

dontbescared
 Share

Recommended Posts

dontbescared Explorer

dontbescared

Posted
Posted (edited)

Hey guys i was keeping this for my next project but decided that i would like the money more.

Like the heading says its a silver top rb20 turbo motor out of a Cefiro (114k's) with new high flow turbo, although i dont know the specs on it i'm told it is an rb25 centre with high flowed rb20 housings. Motor was always in stock trim, never even boosted. all that is needed for the turbo to fit are union adapters.

The motor comes with an uncut loom and ecu, daiken 5 puk clutch that lived an easy couple of months, 5 speed rb20det turbo gearbox, manual tail shaft and 4.3:1 ratio R200 short nose viscous lsd.

I wanna get bout $2500 for the whole package and i don't really wanna separate it if i don't have to.

This would be perfect for someone who wants to go turbo or for a silvia or something.

All these parts are in good condition, motor boosts strongly and drives quietly and the drivetrain is not noisy or anything.

If you have any questions or you wanna check it out then gimme a call on 0401165572.

My email is [email protected].

Thanks,

Aaron.

Edited by dontbescared

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • joshuaho96
      R33 headlight relay conversion?

      By joshuaho96 · Posted

      I was poking through the R34 wiring diagrams vs R33 and noticed that the R34 has proper headlight relays while the R33 is like the R32 and sends full headlight power through the headlight switch. I'm not afraid of wiring but I really would like to do this in a way that looks OEM (clipping into open positions on the OEM relay box) and also unlike the factory wiring which interlocks the high beam and low beam on the halogen series 1 GTR headlights I want to make it such that turning on the high beams keeps the low beams on as well. Any advice on how to locate the specific connectors + crimp terminals + relays I need? I was thinking one NO relay for low beams and another for combined high + low running off the factory high beam headlight connector. I don't really want to splice into a crusty old probably discontinued factory harness so fully reversible is my goal here.
    • sonicii
      HY51 Fuga Hybrid

      By sonicii · Posted

      Pretty sure they run the same engine as the Q50 hybrid which specifies 95 RON.  I ran 98 in mine for a while, but it made no difference in performance or economy, so I have been using 95 for the last few years.  I have never hit 6.0L/100km, but have returned mid to high 6 on the highway.  Being a hybrid, fuel economy is a lot more dependant on how you drive it.  At 110km/h, mine never goes into EV mode on the highway, so returns closer to 7.5L/100. urban driving can return low 8s if you are careful or over 10 if you are a bit more enthusiastic on the throttle.
    • GTSBoy
      4th gear sychro worn

      By GTSBoy · Posted

      About a quarter of what you want to do. It's only R7R, not R&dismantle&replaceparts&reassemble&R. ? It is stock. I already told you, you will NOT have broken those. It's f**king 4th gear for Christ's sake. You just chipped the teeth off.
    • Dose Pipe Sutututu
      Mistakes were made, my R34 Story

      By Dose Pipe Sutututu · Posted

      *waits* for chop idle videos and TT kit hanging off the motor. I like these sounds now, my inner bogan is growing.    
    • Kyer32
      Wtb Rb20det Sydney

      By Kyer32 · Posted

      Want to buy a good running Rb20det in Sydney preferably complete or long block 
×
×
  • Create New...