Reinforcement Bar Fitment

[painsponge]

Hey everyone,

I have recently purchased an r32 gts-t. The previous owner had taken out the reinforcement bar to fit a large FMIC. However, in order to register this vehicle in Canada, I will need a safety certificate. Bad news is, a reinforcement bar is a mandatory requirement to pass the test. That is where the problem comes in. I can't find a rebar anywhere here in N/A! The closest I've found so far is a 240sx rebar from Ebay

(http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=014&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=330045068962&rd=1,1)

I found some pic of the r33 gts-t rebar, and it shares striking similarity with the 240sx one. My question is: is it possible to fit this 240sx rebar on to my r32 gts-t? If yes, how difficult would it be? If it’s labor intensive, is it worth to modified it, or just wait for a rebar to show up eventually. Since I am not planning to drive this car in the winter, I have around 3 months to look for one.

Thanks for reading my rather long post; any help would be greatly appreciated!!!

THANKS IN ADVANCE

[mjones]

Hey everyone,

I have recently purchased an r32 gts-t. The previous owner had taken out the reinforcement bar to fit a large FMIC. However, in order to register this vehicle in Canada, I will need a safety certificate. Bad news is, a reinforcement bar is a mandatory requirement to pass the test. That is where the problem comes in. I can't find a rebar anywhere here in N/A! The closest I've found so far is a 240sx rebar from Ebay

(http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=014&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=330045068962&rd=1,1)

I found some pic of the r33 gts-t rebar, and it shares striking similarity with the 240sx one. My question is: is it possible to fit this 240sx rebar on to my r32 gts-t? If yes, how difficult would it be? If it’s labor intensive, is it worth to modified it, or just wait for a rebar to show up eventually. Since I am not planning to drive this car in the winter, I have around 3 months to look for one.

Thanks for reading my rather long post; any help would be greatly appreciated!!!

THANKS IN ADVANCE

just wait till you find someone that has a half cut that they want to strip and sell,it wont take you to long to find one,or even post in the WANTED section

[MANWHOR3]

There are heaps of skylines in canada. Heaps and heaps and heaps.

I dunno what shops you have over there, but you must be looking at the wrong wreckers.

[Sumo]

make one up yourself?

I'm sure they couldn't be that hard to replicate.

[painsponge]

I saw a couple of wrecked gts-ts, but they were all front collision. so the bar is bent. I think am goin to buy the 240sx one, its only 50bux and somehow fix it to fit gts-t.

thanks for the help