300kw Gtst With Standard Cams + Poncams =

[Cubes]

The turbine housing for the GT3076 or GT3082 is exactly the same, they are interchangeable. Its just that the GT3082 has the larger compressor wheel that flows more than the turbine/hotside is able to pass. Which is why garrett don't list the GT3082 on their website, its technically a bad combination.

I really don't know why there is the need for a GT3082r as the GT3076 comp wheel flows enough for 300-320 odd rwkw pushing close to mid 20psi on an RB with a set of cams.

[Sammie]

well i pmed slide wiating ona reply hope the tubo is sufficient enough for me

[dangerman4]

well my poncams have arrived.

Before i start!

whats the story with unbolting the vct of the old cam and re installing on the new inlet cam?

is there anything i should be aware of or just unbolt the front cover of the vct, and so forth!

cheers

darren

[Cubes]

Darren,

I vaguely remember something about having to spin the motor slightly off TDC when bolting the cams in.

Double check with John as I'm not 100% sure but its definitely something worth finding out as there's nothing worse than damaging a valve or two.

[Sammie]

slide pmed me and said the turbo is the gt3076r IW so hopefully it goes alrite should be here in 2 weeks