Jump to content
SAU Community

Recommended Posts

I just took my r33 gtst out for a spin (the temperature here is about 40 degrees C) and it was running really rough, backfiring lots and stalling quite often. Could rev it while idling in neutral and the thing would just stall when u back off. The engine was surging a bit as well. It was running fine when I was driving it the night before.

Does anybody elses car run rough on hot days?

i have an r32 in the heat it sometimes idle's a little wild like jumps up to 2,000rpm and drops or idles high, but i usally let it sit for a while and it sorts it self out,

maybe in your case the your tunes not up to the hot weather?

do you have standard ecuor aftermarket??

i have a series 2 r33 and i was almost beaten by a vn commodore the other day when it was about 32degrees. i was disgusted. however im 95% sure this is because i have a pod filter on my car and it sucks in alot of hot air from the engine. im looking at getting some piping and mounting it to the front bar soon. but overall yes my car does run worse in the heat. i love driving on a nice cool night. so does the car!

I have the same problem. Yesterday and today the temps have been 38 and 41 and since yesterday when I went to start my car, that had been sitting out in the sun for about 4-5hrs, the car would idle at 700-800rpm but then drop down very low (100rpm) and then try to raise up again to 700rpm. Sometimes it would not raise the revs and just stall. If I start the car up and give it a little gas to raise the revs up to 1500-2000rpm for a bit the car settles down and drives normally. Has the heat damaged something in my car?

Thanks for the response MintR33. The idle problem only seems to happen when I start the car up after driving it for a while so the engine is still warm (or hot as the case has been the last couple of days with the weather in Adelaide!), I don't have the a/c on at this stage. Once the car has been driven for a short while the car idles normally at the lights even with the a/c on. I have just had the cooling system and a/c system fixed with all new parts, but the car was fine after all that work. It has only started with the extremely hot weather.

mine does the same, hell a barina sri kept up with my r33 gtst on a 40degree day.....i was like wtf?

i believe that if you have a pod filter shield it off, do whatever you can to get colder air in and should be a bit better. but yeah turbos sucking in hot air does't exactly make performance increase..

  • 4 weeks later...

It's not like I'm asking my car to do anything special. I'm not even wanting the car to perform well in 40 degrees just wanting it to idle normally and not stall.

I take it that others whose car has had idle issues in hot weather haven't been able to fix this problem?

Its not about performance in hot weather but as to why his car is basically not drivable in hot weather.
i have a series 2 r33 and i was almost beaten by a vn commodore the other day when it was about 32degrees. i was disgusted. however im 95% sure this is because i have a pod filter on my car and it sucks in alot of hot air from the engine. im looking at getting some piping and mounting it to the front bar soon. but overall yes my car does run worse in the heat. i love driving on a nice cool night. so does the car!
yeh, my car is a piece of shit in the hot weather...much slower
mine just feels like it has a little less power, apart from that the idle and everything else is fine in hot weather

...... do i need to point anything out further?

the post where i stated " its common sense turbo cars wont perform in hot weather " was directed towards them posts. and clearly... them posts are stating they are giving there car shit in hot weather and the cars not performing like they are used to in colder weather. i hope to god i dont have to explain WHY this is so...

...... do i need to point anything out further?

the post where i stated " its common sense turbo cars wont perform in hot weather " was directed towards them posts. and clearly... them posts are stating they are giving there car shit in hot weather and the cars not performing like they are used to in colder weather. i hope to god i dont have to explain WHY this is so...

Well im sure you could add something more constructive towards the issue that "understated" is having other then "yeah lets all go flog our turbo cars in 30-40 degree weather. realllll smart"

He isnt talking about flogging his car in the heat even if that seems to be where rochey took this thread in his battle against a vn commodore.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
×
×
  • Create New...