Jump to content
SAU Community

Recommended Posts

Well, went looking at a toyota supra today... terrible!!! The interior is s**t!!! So small and cramped!!! so that went out the window!

Next went to see about a R32 GTR, was going well until he listed some of the bills he has racked up repairing the car over the last few years... my bank account doesnt stretch that far!!

Now my choices are.... R32 GTST or R33 GTST series II. Mayb a rex but doubt it.

Whats the difference apart from shape between the R33 and the R33 series II?

What sort of kw at the wheels do these cars put out?

What sort of quarter mile time do these make?

Also which car is faster, the R32 GTST or the R33 GTST?

How much would u expect to pay for a R33 Series II that is totally stock standered?

Thanks again, and now i might be joining you guys as a skyline owner.....

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

meh, my GTS-t hasnt cost me much in maintanance, mods on the other hand...

but yeh if ur really stressed about putting money into ur car, dont get an import.

out of ur options, id get a R32 GTR, then an R32 gts-t, then a r33 gts-t, if ur after a bit more show and a bit less go maybe the r33 is a better option.

Whats the difference apart from shape between the R33 and the R33 series II?

http://www.skylinesaustralia.com/forums/in...showtopic=17349

What sort of kw at the wheels do these cars put out?

It depends on the mods, they can put out as much as you want.

What sort of quarter mile time do these make?

Also which car is faster, the R32 GTST or the R33 GTST?

r33 gtst has more power and torque, but is heavier. don't know for sure which would be faster down the 1/4 in standard spec

How much would u expect to pay for a R33 Series II that is totally stock standered?

can get them for $11,000-15,000 if you shop right, price varies though depending on condition.

Edited by Mike_
then an R32 gts-t, then a r33 gts-t, if ur after a bit more show and a bit less go maybe the r33 is a better option.

pleeeeeeez, give me a break. R33gtst owns the R32gtst out of the box every single time.

32gtr however is an entirely different story.

what everyone else said - as for the mods - you dont have to do it all at once. Do it little by little. Enjoy it till you get bored and need more power.

Edit - bills so far for me - not much. Had a few problems here and there, but warranty took care of that. Only had to pay for a new timing belt. But other than that, just hte usual stuff like maintenance costs.

Edited by emsta2003

For mild mods the R32 will own the 33 every time.

Throw an fmic, exhaust and 1bar in to the R32 and it is a pretty damn quick car, with a clean launch low to flat 5secs to 100km/h.

The R33 with an fmic and exhaust can only take 10-11psi before R&R sets in, all though they make more power they tend not to go as hard or as 'fun'. I put this down to the added weight and longer (higher) diff ratio of the R33. The R32's gearing is a little shorter, car weighs less and the motor rev's harder.

A mate of mine Maxx used to own an R33 with the above mods, I had a drove and my R32 did feel quicker and more fun out of corners, he also said the same. :P

The added weight and higher diff ratio are all against the r33 compared to the r32.

BUT.. Throw a PFC or safc on to the R33 and its all over for the R32 and in my opinion, bigger motor time as the 2ltr really doesn't cut it on the street with a larger turbo, it may show the peak power numbers but the average power just isn't there. :P

For mild mods the R32 will own the 33 every time.

Throw an fmic, exhaust and 1bar in to the R32 and it is a pretty damn quick car, with a clean launch low to flat 5secs to 100km/h.

The R33 with an fmic and exhaust can only take 10-11psi before R&R sets in, all though they make more power they tend not to go as hard or as 'fun'. I put this down to the added weight and longer (higher) diff ratio of the R33. The R32's gearing is a little shorter, car weighs less and the motor rev's harder.

A mate of mine Maxx used to own an R33 with the above mods, I had a drove and my R32 did feel quicker and more fun out of corners.

The added weight and higher diff ratio are all against the r33 compared to the r32.

BUT.. Throw a PFC or safc on to the R33 and its all over for the R32 and in my opinion, bigger motor time as the 2ltr really doesn't cut it on the street with a larger turbo, it may show the peak power numbers but the average power just isn't there. :P

dont forget - it depends on the skills of a driver too.....

dont forget - it depends on the skills of a driver too.....

Not up and rolling in gear acceleration. No driver skill there. :P

----

One HUGE + for the R33 is the motor has so much more potential to make big power easily. The gearbox is tough and won't break as the rb20 will.

Not up and rolling in gear acceleration. No driver skill there. :P

----

One HUGE + for the R33 is the motor has so much more potential to make big power easily. The gearbox is tough and won't break as the rb20 will.

budget up to $18,000 for car and few grand for mods....

The choice reali is r32 gtst or r33 gtst? both manual.

which will produce higher kw wid easyish mods?

pleeeeeeez, give me a break. R33gtst owns the R32gtst out of the box every single time.

32gtr however is an entirely different story.

lol, i dont care what specs say, every R33 ive been in and my mates have been in have been extremely dissapointed with its guts and have lost to several R32's. Maybe u r33 drivers just dont know how to drive ur cars :P but even the mildly modified ones dont really pull that hard IMO.

the RB25 + gearbox combination is alot better than the RB20 + gearbox combo, but the R33's are too heavy.

thats why i went the r32 over the r33.

lol, i dont care what specs say, every R33 ive been in and my mates have been in have been extremely dissapointed with its guts and have lost to several R32's. Maybe u r33 drivers just dont know how to drive ur cars :) but even the mildly modified ones dont really pull that hard IMO.

the RB25 + gearbox combination is alot better than the RB20 + gearbox combo, but the R33's are too heavy.

thats why i went the r32 over the r33.

1stly buy snakes 33 that looks very clean and has 204RWKW

maybee nisskid you should come for a drive with me and we'll see if u say she dont pull :laugh:

Funny how all the R32 owners are talking up R32's (Though to be fair Cubes did give a bit of credit to the 33).

Some other things to take into account with an R33 over an R32 is the safety & strength of it over a 32. There is NO WAY I will be going back to a car without airbags after personally witnessing what a difference they make. A lot more emphasis was put on the safety side of things by the time the R33 came around, R32's don't have side intrusion beams for a start.

Also the RB25 is gonna be a lot torquier out of the box due to the extra capacity, & an exhaust, front mount intercooler, PFC, & (if you want to wind up the boost) a high flowed turbo is all it takes to start getting some really deacent numbers & performance out of them. If you gotta go stick an R33 engine & gearbox into a 32, you are talking big money already before you even do any other mods.

I wouldn't exactly call a R33 tall geared either, considering it's doing nearly 3 grand at 100 in fifth (I'd love a 6th gear), it still runs a 4.11 diff & can barely hit 60 in first gear & 100 in second before smaking the limiter, surely a 32 isn't geared shorter than that.

The 2 stage boost is all that makes R33's a bit weak in the low revs so spend a few bucks on some sought of boost control & you've got nearly peak torque from about 2500rpm. I want to see an RB20 that can do that.

32's from what I've seen seem to be a lot more prone to electrical gremlins, something I think they improved greatly on 33's if not perfected. Interior is also a lot more pleasing to the eye.

Personally I'm glad I saved the extra money for a 33 :)

Adz2332

I'm a little concerned over you obsession with quater mile times, I don't know if you're asking because you want to stupidly street race, legally drag race, or just because you think it's a good way to measure how quick a car is.

What you have to remember is that you have to live with the way the car drives when you're not reving it's head off down a drag strip. Some cars are hugely powerfull when you're revving the hell out of them, but can be an absolute dog when you are not. Try driving an old 930 model Porsche 911 turbo & you'll know exactly what I mean.

Edited by JazzaR33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Now that the break-in period for both clutch and transmission is nearly over I'd like to give some tips before I forget about everything that happened, also for anyone searching up how to do this job in the future: You will need at least 6 ton jack stands at full extension. I would go as far as to say maybe consider 12 ton jack stands because the height of the transmission + the Harbor Freight hydraulic platform-style transmission jack was enough that it was an absolute PITA getting the transmission out from under the car and back in. The top edge of the bellhousing wants to contact the subframe and oil pan and if you're doing this on the floor forget about trying to lift this transmission off the ground and onto a transmission jack from under the car. Also do not try to use a scissor jack transmission lift. You have to rotate the damn thing in-place on the transmission jack which is hard enough with an adjustable platform and a transmission cradle that will mostly keep the transmission from rolling off the jack but on a scissor lift with a tiny non-adjustable platform? Forget it. Use penetrating oil on the driveshaft bolts. I highly recommend getting a thin 6 point combination (box end + open end) wrench for both the rear driveshaft and front driveshaft and a wrench extension. These bolts are on tight with very little space to work with and those two things together made a massive difference. Even a high torque impact wrench is just the wrong tool for the job here and didn't do what I needed it to do. If your starter bolts aren't seized in place for whatever reason you can in fact snake in a 3/8 inch ratchet + 6 point standard chrome socket up in there and "just" remove the bolts for the starter. Or at least I could. It is entirely by feel, you can barely fit it in, you can barely turn the stupid ratchet, but it is possible. Pull the front pipe/downpipe before you attempt to remove the transmission. In theory you don't have to, in practice just do it.  When pulling the transmission on the way out you don't have to undo all the bolts holding the rear driveshaft to the chassis like the center support bearing and the rear tunnel reinforcement bar but putting the transmission back in I highly recommend doing this because it will let you raise the transmission without constantly dealing with the driveshaft interfering in one way or another. I undid the bottom of the engine mount but I honestly don't know that it helped anything. If you do this make sure you put a towel on the back of the valve cover to keep the engine from smashing all the pipes on the firewall. Once the transmission has been pulled back far enough to clear the dowels you need to twist it in place clockwise if you're sitting behind the transmission. This will rotate the starter down towards the ground. The starter bump seems like it might clear if you twist the transmission the other way but it definitely won't. I have scraped the shit out of my transmission tunnel trying so learn from my mistake. You will need a center punch and an appropriate size drill bit and screw to pull the rear main seal. Then use vice grips and preferably a slide hammer attachment for those vice grips to yank the seal out. Do not let the drill or screw contact any part of the crank and clean the engine carefully after removing the seal to avoid getting metal fragments into the engine. I used a Slide Hammer and Bearing Puller Set, 5 Piece from Harbor Freight to pull the old pilot bearing. The "wet paper towel" trick sucked and just got dirty clutch water everywhere. Buy the tool or borrow it from a friend and save yourself the pain. It comes right out. Mine was very worn compared to the new one and it was starting to show cracks. Soak it in engine oil for a day in case yours has lost all of the oil to the plastic bag it comes in. You may be tempted to get the Nismo aftermarket pilot bearing but local mechanics have told me that they fail prematurely and if they do fail they do far more damage than a failed OEM pilot bushing. I mentioned this before but the Super Coppermix Twin clutch friction disks are in fact directional. The subtle coning of the fingers in both cases should be facing towards the center of the hub. So the coning on the rearmost disk closest to the pressure plate should go towards the engine, and the one closest to the flywheel should be flipped the other way. Otherwise when you torque down the pressure plate it will be warped and if you attempt to drive it like this it will make a very nasty grinding noise. Also, there is in fact an orientation to the washers for the pressure plate if you don't want to damage the anodizing. Rounded side of the washer faces the pressure plate. The flat side faces the bolt head. Pulling the transmission from the transfer case you need to be extremely careful with the shift cover plate. This part is discontinued. Try your best to avoid damaging the mating surfaces or breaking the pry points. I used a dead blow rubber hammer after removing the bolts to smack it sideways to slide it off the RTV the previous mechanic applied. I recommend using gasket dressing on the OEM paper gasket to try and keep the ATF from leaking out of that surface which seems to be a perpetual problem. Undoing the shifter rod end is an absolute PITA. Get a set of roll pin punches. Those are mandatory for this. Also I strongly, strongly recommend getting a palm nailer that will fit your roll pin punch. Also, put a clean (emphasis on clean) towel wrapped around the back end of the roll pin to keep it from shooting into the transfer case so you can spend a good hour or two with a magnet on a stick getting it out. Do not damage the shifter rod end either because those are discontinued as well. Do not use aftermarket flywheel bolts. Or if you do, make sure they are exactly the same dimensions as OEM before you go to install them. I have seen people mention that they got the wrong bolts and it meant having to do the job again. High torque impact wrench makes removal easy. I used some combination of a pry bar and flathead screwdriver to keep the flywheel from turning but consider just buying a proper flywheel lock instead. Just buy the OS Giken clutch alignment tool from RHDJapan. I hated the plastic alignment tool and you will never be confident this thing will work as intended. Don't forget to install the Nismo provided clutch fork boot. Otherwise it will make unearthly noises when you press the clutch pedal as it says on the little installation sheet in Japanese. Also, on both initial disassembly and assembly you must follow torque sequence for the pressure plate bolts. For some reason the Nismo directions tell you to put in the smaller 3 bolts last. I would not do this. Fully insert and thread those bolts to the end first, then tighten the other larger pressure plate bolts according to torque sequence. Then at the end you can also torque these 3 smaller bolts. Doing it the other way can cause these bolts to bind and the whole thing won't fit as it should. Hope this helps someone out there.
    • Every one has seemed to of have missed . . . . . . . The Mazda Cosmo . . . . . . what a MACHINE ! !
    • I might have gone a little more South Efrican.  But this is off topic.   😍😍 FD 😍😍
×
×
  • Create New...