Jump to content
SAU Community

455kw From Standard Engine. How?

AndrewD

By AndrewD,
in Engines & Forced Induction

 Share

Recommended Posts

LTHLRB Grand Master

LTHLRB

Posted
Posted

u need to pretty much do everything u can possibly do without touching the block. Bigger turbo, fuel system, cams, porting, ecu, the lot.. but it will pop sooner or later...

what engine? rb20de rb20det rb25de rb25det rb26de rb26det rb30e rb30et? what?

Jago Mentor

Jago

Posted
Posted

he HAS to be taking the piss if he asks if he needs a tune...

It will be a task from an RB26 without touching internals, task and a half from all the rest other than RB30DET :). You could probably count the number of runs you get from it on one hand before it spits a rod out of the side of the block or something. Then again, me being me, i like a bit of reliability.

Munna1 Proficient

Munna1

Posted
Posted (edited)

Why do you want that much power? Whats the purpose of the car? Bragging dyno rights? or a drivable street car?

For that sort of power id go for a RB30DET or a RB26DETT.

Or better still a combination of both http://nissanskyline.6te.net/rb30det.htm

Edited by Munna1
sinistaGTR Grand Master

sinistaGTR

Posted
Posted

I have a question, if i run 6million psi on a stock turbo and i have a pod filter will i get 2000000000kw at the front wheels in my r33. And if i put a apexi sticker on with a bov will i get 1000hp more and a sik FLUTTER noise.......Also if put my bass cd on can i knock 2secs off my quatermile time with the push from the subwoofer and will i pick up chicks at the same time......

Hakai Enthusiast

Hakai

Posted
Posted
i want to know how to make 455 rwkw from standard engine.

what parts do i need to get.

how much am i looking at?

do i need a tune?

can i run 2 bar?

I'm impressed by the coherence of this post. I would have thought that seeing school's out as of this morning you would already be off guzzling bags of goon like it's water. That's what you fully sick ghetto thugs do now days isn't it?

AndrewD Contributor

AndrewD

Posted
  • Author
Posted

Now now no need to be mean.

Just because you didnt see the sarcasm in my post doesnt mean you can take your inadequacies out on me.

For those that were helpful, thankyou. But my intention was to enlighten members of the fact that many people on this forum ask dumb questions like what i posted; Questions that really dont deserve an answer.

And no i think you would be thinking of Andrew G. Yes he is a tool. I totally agree.

Beer Baron Grand Master

Beer Baron

Posted
Posted

now that we've had one helpful response I think we can safely say this guys question has been answered. in the interest of saving us all from more 'schools out' or "fvk off noob" posts I'm closing this thread. AndrewD: If you really have this goal, by all means post another thread, or pm me to re-open this one. but you are going to need to pony up some details about what exactly you have, and what you want to do with it.

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • drifter17a
      R34 gtt rb25det neo timing belt kit

      By drifter17a · Posted

      So been ocd with timing mark but checked from few angle and seems both cam are on and crank is matching as well to the slot on sump and crank pully   i noticed crankshaft cover has been robbed as per attached pic. Any ideas why? Could my balancer or harmonic be on its way out? should I replace the cover? https://ibb.co/ZR1JFYRR
    • drifter17a
      R34 gtt rb25det neo timing belt kit

      By drifter17a · Posted

      So now doing the change and first time dealing with rb so little nervous giving engine power and potential for screwing it up When you align all marks and then remove crank bolt, timing move little I assume you can put the bolt back in once you have removed the pully to get timing to where you want?   here is pic of my both intake and exchust cam aligned, depending on angle you look they seem to be either aligned or a half tooth or so out. Any thoughts? Should you angle your face and look at each mark that way as if looking straight rather than from above as it can be misleading   <a href="https://ibb.co/ZpnhcvbF"><img src="https://i.ibb.co/HfWrGR9b/IMG-4447.jpg" alt="IMG-4447" border="0"></a> <a href="https://ibb.co/4wm2wn4q"><img src="https://i.ibb.co/JWBqWwr1/IMG-4445.jpg" alt="IMG-4445" border="0"></a>   https://ibb.co/ZpnhcvbF https://ibb.co/4wm2wn4q
    • sunsetR33
      braided lines for the turbos

      By sunsetR33 · Posted

      Thanks for the reply @GTSBoy Haven't really thought of that yet, but you are right. If the hose was damaged it should be absolutely pissing by now. I'll put some heat sleeve around it for good measure since I'm already removing the line anyway.  Maybe I'll put on some of the stock hardlines if I ever fully remove the turbos again. Maybe when T51R modding the compressor housings? Might be a fun mod on GT28s for that "fake single turbo" effect.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 1: I did some work on the car already before finalizing this post and my "issues" list. I dropped the Tomei exhaust in favor of the HKS Hi Power Silent. Sounds nice and I can actually hear myself think now. Also gives me a realistic chance to legally drive without silencer inserts. A bit of cheating was necessary to still be able to mount the Top Secret style diffuser. Some malusage of washers and a bit of "convincing" toward the brackets and exhaust hanger seemed to do the trick. The shaky steering wheel has been resolved as various suspension components were worn, like sway bar bushings and link bars. Most notably the two steering tie rod ends. Had some trouble finding bushings because my sway bars are not OEM thickness, 23.x up front and 27 rear. But non adjustable, so no aftermarket I suppose. Maybe they are nismo units? Turbo oil drain hoses were definitely still the originals and are new now. Wasn't the cause of the turbo oil leak sadly. Currently removing the rear turbo because of it, I suspect the braided oil feed line is the culprit. This issue needs to be dealt with so I can work towards actually getting the turbo setup legal and inspected. Two new issues to add to the list as well. Rear Main seal is probably leaking. Time will show how bad it is, I don't really want to drop the gearbox right now just for the stupid seal. Could fix a few other things in one go once I do that. Front right driveshaft grease is going past the cv boot, so at some point I'll fix that too.
    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Ok so no 4cyl clutch... Yeah it is a factory manual. So if iam correct i need clutch and flywheel too? I can use something that suits something like R32 GTST?   EDIT: https://www.ebay.com/itm/224291042776 Is this ok?   EDIT2: i maybe forget to mention this(dk how important it is) but the trans will be behind RB25DET NEO(iam doing swap) It will be there for a little while. Iam planing to do bigbox or BMW tranny..
×
×
  • Create New...