Jump to content
SAU Community

Recommended Posts

im on a budget of about 2k ive just thown a t04 turbo aftermarket manifold and a 38mm wastegate on my rb20 i also have a 600x300x80mm font mount on the car im a drifter i was woundering wot is the best way to go next should i get an aftermarket computer or will the sstandard 1 be fine should i get a bigger fuel pump or injectors

Edited by drftnfrysi
Link to comment
https://www.sau.com.au/forums/topic/146138-small-budget/
Share on other sites

  • 2 weeks later...

i'd say with that turbo you'll need injectors and fuel pump to be able to run any real amount of boost. i also assume you have a hiflowing exhaust system?

therefore you will need some form of aftermarket management and a tune. whether it is as crude as a SAFC through to a remap or a full aftermarket system (depending on your budget).

you say you are a drifter. more power helps but a clutch, agood lsd and suspension setup (as extreme as you want to go) will make it easier to drift and give you greater control

obviously it all depends on your budget. just keep your eye out on here for bargains on the parts you need

Link to comment
https://www.sau.com.au/forums/topic/146138-small-budget/#findComment-2754644
Share on other sites

suspension you'll need for sure and tyres...lots of tyres!

even if you do get the pump and injectors the car will run like shit it want be able to control the injectors i dont think get a emange or something there cheap or dr drift re-map!

Link to comment
https://www.sau.com.au/forums/topic/146138-small-budget/#findComment-2754762
Share on other sites

pod filter and box + cai or high flowing panel filter

3in exhaust, high flow cat

fmic and piping

you already have turbo so you will need

fuel pump, injectors, ecu/tune

boost control method... ebc or otherwise

z32 afm... maybe

clutch

spend money on handling/braking to make it managable (and more fun imo) to drive unless you want to drag (:thumbsdown)

mentioned above is probably more than two grand. the fact that you have chosen a large turbo means you'll require the extra fuel system items to make used of the turbo.

only tip is to do what you can yourself to assist the budget and yer keep an eye out for deals on the forums

Link to comment
https://www.sau.com.au/forums/topic/146138-small-budget/#findComment-2755212
Share on other sites

  • 3 weeks later...
i'd say with that turbo you'll need injectors and fuel pump to be able to run any real amount of boost. i also assume you have a hiflowing exhaust system?

therefore you will need some form of aftermarket management and a tune. whether it is as crude as a SAFC through to a remap or a full aftermarket system (depending on your budget).

you say you are a drifter. more power helps but a clutch, agood lsd and suspension setup (as extreme as you want to go) will make it easier to drift and give you greater control

obviously it all depends on your budget. just keep your eye out on here for bargains on the parts you need

Stole the words right out of my mouth :dry:

More Power = MORE AIR + MORE FUEL

If one of these is missing in the equation = DETONATION

Id also use an oil cooler and surge tank to be safe...that is of course

you want to drift safely... :O

Edited by Nabil
Link to comment
https://www.sau.com.au/forums/topic/146138-small-budget/#findComment-2796829
Share on other sites

to start with i already run coilovers and a 550hp heavy duty cluch i have a 3inch exaust turbo back got a pod and a massive afm and already got a boost controller

You have a stock AFM

as, if you have a stock ECU, then you wont be running a "Massive" AFM.

Link to comment
https://www.sau.com.au/forums/topic/146138-small-budget/#findComment-2796854
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's more than one way to skin that cat, and most of the sump Maatouks have done will be GTR sumps. They are HUGE in GTR drag racing here.
    • Yeah...I always start at the shift solenoids, because there's only a few reasons these will spook into limp mode, and bad shift solenoids is one ~ the other can be the shift control module (if you have steering wheel shift buttons)...it's easier to eliminate the solenoids first.
    • Might piggy back off this thread since there's been a good discussion about PWM.   I purchased a Walbro 460 F90000267 and have been looking into PWM to understand it. It was purchased more of a future proof as my original OEM fuel pump died (r33 below 200kw) and figured I'd just upgrade it to this. That's when it hit me that a pump this big can cause more dramas with such high amperage draw and heating of the fuel pump being on 100% all the time in such a mild setup.   I have a Nexus R3 and slowly collecting power mods but I was looking into the PWM feature on the NSP software:   Then looking at the graph from the fuel pump:     Am I safe to assume reducing duty cycle to 50% for example would make the pump run like a 230/lph ? Where does the PWM come in all of this ?   I've gone down the rabbit hole of PWM fuel pumps and it seems there are many differing opinions on how to go about it 😅  
    • Thank you, this will keep me busy for a bit.  I will update progression.
    • That specific one would be an exchange part, meaning I'd have to send mine to them. Plus it looks like a non AWD sump, which won't work for me. There is one or two shops in my country that I can ask to do a sump extension job and it'd most likely end up being cheaper than sending mine to AUS or NZ and getting one back, and quicker too.
×
×
  • Create New...