Jump to content
SAU Community

Recommended Posts

Lol ive already seen this :)

a guy in WA has a decepticon badge on his R34.

Also says on the said 'to punish and enslave'

Looks pretty sik IMO.

That's Ryan (NISZILLA). I'll try and find some pics of it. Nice car, and well thought out mods.

20090906-125541-ST.jpg_600.jpg

20090906-103519-ST.jpg_600.jpg

those are from a sauwa cruise up north :P was an epic cruise!!! so much fun..cept got a chip in windscreen from it :)

10865_205676760026_568690026_4420684_2628574_n.jpg

just got plates a week ago :)

waiting to buy some white te37's :D

Edited by Neuroglider
:thumbsup: thanks nick, bad thing with that hot front bar.. is 1. fibreglass 2. got it from JSAI = fibreglass already splitting etc :P bugger.. and i hardly drive the thing!! *sigh* i will see you at the nsw 'sns' im guessing, along with terry, matt, shanil etc

Lovin that front bar dori :P

@Steve

Fronts: 18x8.5 +30 235/40

Rears: 18x9.5 +20 245/40

As for scrubbing on the rears at that height, it only happened very rarely. There was about 8mm clearance between the tyre and the fender.

cool, fitment is pretty

i run

18x8 +24 235/40

18x9 +23 265/35

been scared to lower the rear down too much because of the bigger tyres. think i need to put on some 235 or 245s on the back to get it sitting nicely

Took some pics with mates 370Z at Vic Imports Cruise (car was sooooooooo filthy as you can see it wasnt a great day lol) displaying some CF bits :(. its nothing big but the little things does make a difference

4145035499_32542ca0db_b.jpg

4145775886_9eb03c32a3_b.jpg

4145793004_67e2176137_b.jpg

4145778076_09bd90b16a_b.jpg

4145029981_d4e7e0d75b_b.jpg

Cheers mate, just cant wait to put this in there

I hope you have Twin Turbos to go with that RB26...

:(

What front spoiler is that? It looks really good without being ridiculous looking.

If you are referring to the front bar then I think it is just the stock one.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...