450hp Turbo And 550cc Injectors X 6

[zdream]

This turbo made 350rwhp on 17psi boost on 3 litre v6 turbo (vg30det )polished 5.0 compressor .ceramic coated 0.96 exhaust. 53mm front wheel, 63mm exhaust wheel.Has done 200km and 3 dyno sessions work(like new still) plus K&N filter, 500hp fuel pump, silicon reducer,turbonetics boost controller,oil delivery line and fittings, plus 6 x 550cc rx7 injectors (series 5 ) just serviced ready to go. (100hp each) $1200 the lot

[email protected]

[r31 silhouette]

willing to seperate? how much for injectors?

[zdream]

willing to seperate? how much for injectors?

Yes, $400 ONO ON INJECTORS

[Sexual_32]

those injectors fit rb20 yes?

[zdream]

those injectors fit rb20 yes?

Yes, to the best of my knowlegde.

[wessa02]

pics and details of the turbo and pump to [email protected]

[Sexual_32]

anyone confirm they are direct fit? No plugs have 2 be changed?

Edited December 11, 2006 by Sexual_300

[-NismoR32-]

RB20 injector rail has to be changed to accept 14mm o-ring style injectors (instead of 11mm type which is what the rb20 has) the rx-7 injectors part number is 195500-2020 (i think) to use a low impedacnce injectors you would have to use a resistor pack from a gtr (http://www.skylinesaustralia.com/forums/index.php?showtopic=62674)

[zdream]

RB20 injector rail has to be changed to accept 14mm o-ring style injectors (instead of 11mm type which is what the rb20 has) the rx-7 injectors part number is 195500-2020 (i think) to use a low impedacnce injectors you would have to use a resistor pack from a gtr (http://www.skylinesaustralia.com/forums/index.php?showtopic=62674)

No, wrong, the injector is a 11mm(13mm with o-ring) so it would fit into the rail. And also Im sure the injector is a high impedance one, being a factory injector, I will check tonight as my multi meter has just gone flat(need to get some batteries)you did get the part number correct

0421862864 for further detailes

Edited December 12, 2006 by zdream

[zdream]

No, wrong, the injector is a 11mm(13mm with o-ring) so it would fit into the rail. And also Im sure the injector is a high impedance one, being a factory injector, I will check tonight as my multi meter has just gone flat(need to get some batteries)you did get the part number correct

0421862864 for further detailes

yes, they are high impeadance injectors

[Sexual_32]

yeah wateva that means.. so they bolt straight in for rb20?

[zdream]

yeah wateva that means.. so they bolt straight in for rb20?

yes! If your rail takes a 11mm injector

Edited December 13, 2006 by zdream

[zdream]

Turbo and injectors are sold,thanks Men