Jump to content
SAU Community

Recommended Posts

NEW DETAILS

Now selling FULL SURGE TANK SETUP.

- 2L surge tank

- 2x Bosch 979 external fuel pumps (with brackets)

- 1x GTR pump (mounted externally, with bracket)

- Earls stainless steel braided lines

- Earls AN-6 and AN-8 fittings

- 2x Ryco fuel filters with brackets to mount in engine bay

The entire system, was supporting over 400kw at the wheels.

It was setup with a intank GTR pump (not included), feeding the surge. The 2nd GTR pump was mounted externally as an additional feed between tank and surge, with the two 979s down to the fuel rail - but can be used any way you want.

Surge tank has a top vent (AN6), three outlets at the top (AN6), and three outlets at the bottom (AN8) - all use Earls fittings.

soldb]

Located in Western Sydney, pickup available there or Hurstville.

post-6400-1165833549.jpg post-6400-1165833562.jpg

(NB: 2nd pic is all the dash 6 hoses, which are also shown in the bottom left of the first pic)

post-6400-1171284810.jpg post-6400-1171284824.jpg post-6400-1171284843.jpg post-6400-1171284863.jpg

Link to comment
https://www.sau.com.au/forums/topic/146936-fuel-setup-parts-sold-syd/
Share on other sites

  • 1 month later...
how long have the pumps been empty of fuel for? looks to be an awesomely priced setup!

Just over a month now. I gave the pump outlets a squirt of WD40 and taped all them up so should be fine in storage.

Pics to come, the hoses enabled me to place the surge tank on the right side of my boot next to the Attessa pump, with the fuel pumps on the boot floor where the spare tyre used to be.

  • 4 weeks later...
what are the 979's rated at? (what power figure can they support)

400kw easily.

Leewah used 2x 979s in his setup, and he had significantly more.

  • 1 month later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • https://www.youtube.com/watch?v=KyZDvZmvhik
    • You'd be better off digging a pit and standing under it to shoot it.
    • The easiest way would to be ignore the oscilloscope, grab a multimeter, and make sure all the main connections are right. An oscilloscope will give 99.9% of even technicians so much grief, as they have no idea what things should even look like on an oscilloscope. Which is also even more likely for someone who's first ever major work on a car is this If the battery volts are dropping down so low, the LDV will reboot the ECU, when it does so, it will drop out the start circuit. If this is occuring, the battery voltage should also come back up. Give it a few tests, even simple ones like when you're attempting to crank it, measure voltage from the engine block, to the negative terminal. You might find you've got really bad connections somewhere. My guess is the "new" motor has something like a shit starter motor, at which point, you can swap the starter motor from the old motor, to the new motor. Before I did any of the above though, I'd 100% confirm the battery in the vehicle. Most jumper packs are absolutely useless, especially if a battery has a bad cell for example. Also the new modern "jump packs" if you don't know what you're doing with them, you won't even get them into high current stage. So go back to basics, check the battery, especially with a known good one as a replacement test. Check ALL the wiring, this includes where they're bolted onto the battery, and bolted onto the starter motor. Check all the earth straps are on. Measure your resistances across your earth straps. A good check here is to measure voltage across the earth straps while you're trying to crank it. If you're seeing voltage, you've got high resistance joints! Oh, and once you've done the above, check the battery over again.
    • For most rotisseries, as Duncan has mentioned, you really don't want a full car on it, you want a stripped shell. And imagine how many more weeks THAT is going to add to working on the car...
×
×
  • Create New...