Jump to content
SAU Community

R32 Gtr Rear Window Jet

JonesyGTR

By JonesyGTR,
in General Maintenance

 Share

Recommended Posts

JonesyGTR Community Regular

JonesyGTR

Posted
Posted

G'Day guys,

Been having a problem with my rear wiper jet that must have only occured recently (it was working fine 2 weeks ago).

When i put the rear wiper on, that works fine, no issues at all.

however, the other nite I switched on the rear jet, and nothing happened! I got out while I had the girlfriend press it to see if I could hear the motor going. To be honest I cant be sure, but it sounded like it was trying to pump out water. I tried unblocking the nozzle with a pin, but to no avail. All the connections look good and there are no visible leaks in the system - ie. i can't see water leaking out somewhere thus reducing pressure to the jets.

Then this morning, as I was on the way to work I thought I would try it again - this time i held the switch down for longer than normal. Some water did EVENTUALLY come out, but it was a trickle at best.

Any ideas guys? Any help is appreciated.

Cheers,

Dan :laugh:

Link to comment
https://www.sau.com.au/forums/topic/146988-r32-gtr-rear-window-jet/
Share on other sites
arbess Experienced

arbess

Posted
Posted

any water left in bottle firstly?

i personally would start where the water line sucks the water from, ie. the water bottle at the front and check for blockages. then i would jump in the boot to check the other end for blockages.

if no end has proved to be the problem, maybe there is a kink in your line, or something is pressing on the line. so you might want to follow the whole line to find your issue.

good luck

**this is assuming that your wiper jet motor is still turning**

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Therry
      Left & Right Window Regulators for 2013 Skyline V36 Coupe

      By Therry · Posted

      Both windows operate normally while the engine is running but start to sag as soon as I switch off.  Does anyone know of reasonably priced replacements or other brands that will fit?
    • Duncan
      R32gtr sputtering and stalling

      By Duncan · Posted

      Actually PowerFC is probably the easiest to get basic data from, it comes with a hand controller and display so you don't need to remember to pack a laptop every time you drive. It also has a PC based viewing/logging option if required. Nissan used consult on these because back in the mid 80s, ODB was just a glint in a standard's body's eyes.  They switched to OBD shape around 2000 (my 2001 Cima had OBD shaped but not OBD compliant port) With the standard ECU there is a cable and software available to give basic data too, I think it is called Nissan Data Scan or s
    • Kinkstaah
      R34 Gtt Wheel Offset Advice

      By Kinkstaah · Posted

      Given by the sheer number of questions about offset, absolutely not. If you had the information formatted this way: Space from R34 GTT hub to outer arch = 100mm Space from R34 GTT inner hub to nearest suspension arm = 90mm. (making this up) Buying a wheel that was advertised as Enkei RPZ5 Diameter 18in Width 9 Distance to arch = 84mm Distance to suspension arm = 76mm 100% of people would know instantly if it fits. They would absolutely also know instantly how close it fits too, and no questions would need to be asked. You would know you would have 16mm from the guard and 14mm from the suspension arm.
    • silviaz
      R32gtr sputtering and stalling

      By silviaz · Posted

      Ah ok, for example for the apexi ecu I heard that it's pretty limited with the information it can give you. Also not sure why Nissan used the consult port over the obd2, what the idea there was.
    • MBS206
      R32gtr sputtering and stalling

      By MBS206 · Posted

      Diagnosing with and without is mostly the same. You need to know, as Duncan asked, and what conditions. Car hot, cold, idling, driving, if while driving what rpms, is when you're varying, or is it when held constant.   From there it's understanding what can be causing it. Starting with pretending all of the sensors are correct. Which means if it's going rich, why would it be thinking more air is going in than it is, and under what conditions. So things like if only when under boost, it could be be a loose intake piping joint. It's just understanding the system, and understanding when/how the problem occurs, and then if it's only occuring in specific scenarios, what can be causing it.   ECU specifically, if it's aftermarket, it'll have software you can use, for the Skylines on factory ECU, there is Nissan Consult you can use. Most ECUs have a way to get data from them.
×
×
  • Create New...