Jump to content
SAU Community

Recommended Posts

i am building a cold air box in my 32gtst and was considering the option of a bonnet vent instead of feeding air through the front bar, would this mean i would have problems in rain ? was thinking out putting an R34 GTR V spec II vent on

gunna photoshop some pics to see how it looks but cant find any decent pics of the real thing :ninja:

anyways yeh, would water gt on my pod, and this would be bad right ?

Link to comment
https://www.sau.com.au/forums/topic/147027-bonnet-vents/
Share on other sites

Rain is gonna get in what ever you do if driving in bad weather.

I'd go front bar vent...

1. Build a rain trap in the induction pipe.

Straight pipe tee'd or Y'd off to the air box,

dead end the straight bit of pipe about 6 inches awat from the T or Y

Water is heavier so wil carry straight on the easiest path.....i(e) the dead end.

It will hit the dead end,so put a small hiole in the dead end at the bottom edge to drain water away, via a drain pipe/ tube or just leave the hole to draining away to outside the body obviously

job done....

...some water bourne air will still carry on in to the airbox, cant be helped...bit like cheap water injection...LOL

2 or just plug the air inlet pipe in bad weather, and take the lid off your air box.....your not going to be road racing in really bad weather anyway.

Edited by Allkiller
Link to comment
https://www.sau.com.au/forums/topic/147027-bonnet-vents/#findComment-2745079
Share on other sites

The Hood Vent looks very cool

But it is in turbulent air...as it hits the grill and lights air curls over the front and is not ram air style as the Front Bar would be,

The hood vent would need to be further back to avoid the turbulence IMO

Link to comment
https://www.sau.com.au/forums/topic/147027-bonnet-vents/#findComment-2745172
Share on other sites

it may not get as much as a ram air fed system.

it still gets alot of airflow through that vent.. the airbox will seal against the bonnet and a custom pipe is going to be made that feeds air straight to my turbo's. as i dont need my AFM's anymore.. it is trial and error at the moment but i think it will be sufficiant.. gives quite an induction noise thats for sure...

*edit* yes water gets in if it rains...

Edited by Noy
Link to comment
https://www.sau.com.au/forums/topic/147027-bonnet-vents/#findComment-2745261
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If you are genuinely considering trying to get this engineered, I would strongly advise finding the engineer that is happy to sign that off first before you put the hole in your car.  I've seen cars get defected for this and not be able to be put back on the road as no engineer they spoke to was happy to sign if off.  
    • Apologies, while id like to put the MAF as close to the TB and relocate the recirc, this may be too much work. Will most likely end up just putting it on the original AFM spot ( onto/next to the airbox ).  Was going through nistune, found a pretty nifty doc on this. Nistune MAF Notes. Also, i was looking through the bay, and there seems to be a tube/line connected from the A/C to the intercooler piping ( Between the smic and the recirc), what does this do as the crossover fmic piping doesnt have any connection? plumbing? not sure what you call it but the nipple thing ahah.  Also, been reading up more about crossover fmic in regards to the legality of having the hole drilled for the piping, this would most likely need to be engineered right?
    • My advice is if you need a big build done do it in Japan. The yen rate is so favorable and there are shops that can be genuinely trusted and not micromanaged/carefully monitored every step of the way. Garage Yoshida is obviously my preferred option but they're so busy these days and all interaction with new customers has to be mediated through BBL/Toprank now. 
    • I haven't....but a poorly made one would terrify me. Surely a good second hand one is the go, as they don't work hard and no-one wants to keep one after they are finished with it A big consideration would be the weight of the shell you are putting on it....is it a fully dressed chassis or just the body
×
×
  • Create New...