Jump to content
SAU Community

Recommended Posts

i am building a cold air box in my 32gtst and was considering the option of a bonnet vent instead of feeding air through the front bar, would this mean i would have problems in rain ? was thinking out putting an R34 GTR V spec II vent on

gunna photoshop some pics to see how it looks but cant find any decent pics of the real thing :ninja:

anyways yeh, would water gt on my pod, and this would be bad right ?

Link to comment
https://www.sau.com.au/forums/topic/147027-bonnet-vents/
Share on other sites

Rain is gonna get in what ever you do if driving in bad weather.

I'd go front bar vent...

1. Build a rain trap in the induction pipe.

Straight pipe tee'd or Y'd off to the air box,

dead end the straight bit of pipe about 6 inches awat from the T or Y

Water is heavier so wil carry straight on the easiest path.....i(e) the dead end.

It will hit the dead end,so put a small hiole in the dead end at the bottom edge to drain water away, via a drain pipe/ tube or just leave the hole to draining away to outside the body obviously

job done....

...some water bourne air will still carry on in to the airbox, cant be helped...bit like cheap water injection...LOL

2 or just plug the air inlet pipe in bad weather, and take the lid off your air box.....your not going to be road racing in really bad weather anyway.

Edited by Allkiller
Link to comment
https://www.sau.com.au/forums/topic/147027-bonnet-vents/#findComment-2745079
Share on other sites

The Hood Vent looks very cool

But it is in turbulent air...as it hits the grill and lights air curls over the front and is not ram air style as the Front Bar would be,

The hood vent would need to be further back to avoid the turbulence IMO

Link to comment
https://www.sau.com.au/forums/topic/147027-bonnet-vents/#findComment-2745172
Share on other sites

it may not get as much as a ram air fed system.

it still gets alot of airflow through that vent.. the airbox will seal against the bonnet and a custom pipe is going to be made that feeds air straight to my turbo's. as i dont need my AFM's anymore.. it is trial and error at the moment but i think it will be sufficiant.. gives quite an induction noise thats for sure...

*edit* yes water gets in if it rains...

Edited by Noy
Link to comment
https://www.sau.com.au/forums/topic/147027-bonnet-vents/#findComment-2745261
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My muffler was fully customised to suit the car. He mailed me the end caps, I marked up the pipe locations (4 pipes in a single muffler) and he sent it back all welded. Certainly more expensive than a mass produced generic size, but that's hardly surprising. My R32 Exhaust has a Magnaflow muffler in it, if I need generic mufflers then they're usually a safe bet. I've got the Vibrant clamps on the intercooler pipes, just because they're nicer to use than the bolt together ones and not as expensive as a real Wiggins clamp.
    • Yeah. Nah. A grain of sand will take out a ceramic turbine that is doing 100000rpm.
    • Yes, it was checked with the roller rockers installed using a LS7 lifter that had been converted to a solid lifter with a dummy spring at 0 lash with a stock length pushrod. With the Johnson lifters longer pushrods were needed which are now 7.700" and 110 wall. Long thiccbois. People much more knowledgeable than I am are doing the measuring! 
    • Well... New things have arrived... And now I need to really dig into the design of the power steering reservoir.    
    • Interesting. I had that issue on my old car. After a rocker arm broke, the electrode must have been hit or something, though the cylinder didn't look like it was damaged when I put a scope down there, might have been the turbine but hard to imagine that a small piece of metal damage the turbine by that much. Seems like it's not even big enough to do the damage most of it.
×
×
  • Create New...